I am trying to build a template for a retaining wall in Open Roads. How do I get the depth of the retaining wall to vary with the terrain? Also, how do I add a fill end condition at the bottom of the retaining (this also needs to vary with the terrain…

While in the Create Template dialog, clicking the Help button gets me a blank help box. How is this fixed, with a variable? Not sure what is the cause. MicroStation V8i (SS4) 08.11.09.832 InRoads Suite V8i (SS4) 08.11.09.878 Thanks

InRoads SS2 I have a pavement section that I need to split into two separate components for left and right side shoulder reconstruction. The only way I know to accomplish this is to delete everything on one side, then completely reconstruct the now…

In InRoads SS2, In a template, I could set a style constraint for a point to be horizontal, vertical, or both. In ORD I am only seeing the option to set a Horizontal Feature Constraint. What happened to the vertical option?

Hello, I am designing a template that involves a standard two directional curbed road-way (split between two templates (one for left and one for right)) with sidewalks (shown as a vertical line with no horizontal dimension) adjacent to the curbside, and…

Hi, I have a question regarding on how to create a cut for some isolate foundations (square shaped) with a cut slope of 1:1. So far I have tried to draw a square, assign an elevation and then apply a linear template but it can not create the 'hole…

I am having trouble with a template, the order in which the points are being connected is out of sequence and does not follow the constraints. It actually seems to be following the order of point selection when using the NEXT and PREVIOUS buttons in the…

Hi all, Due to the OpenRoads ITL limitations meaning that use of a single network ITL by multiple users was fraught with danger - ie. multiple users opening a single ITL at the same time and last save overwriting others changes, OR not rereading ITL…

I am using Inroads SS2 and have created some roundabout geometry using the Inroads Roundabout tool. I now need to import this geometry into inroads so that I can start using it for my point controls for my templates. This is where I am getting stuck…

When working in the Create Template functions in SS2, I am using pieces/components of other existing templates to make a special shoulder that is intended to be used as an End Condtion exception. I now realize it must actually "be" and end condition to…

Hi all I have a template end condition problem. When i view the cross sections it shows the entire drain on the LHS even when the NGL is sloping away from the template. So iv tried some display rules to stop this which works when testing but not in…

Hi guys, Who has experience with this? I have searched for videos or tutorials, but I cannot find anything useful. Any hints? Thank you in advance

In order to make my design more intelligent,i create a lot of display rules in template，such as different ground elevation choose different retaining wall. it works，but when i set template interval=5m, when i set template inverval=0.1m so if i…

Can someone upload some good preferences and template files for me please. I would tealy apritiate it. For Inroads V8i. Thank you!

Hello! Can someone help me with a link with some good videos for mastering my template production , i want to perfect this to a next level, but i cant find any good tutorials dedicated to this.thank you.Great support!

When I attempt to create a new corridor template I receive an error message. The Error occurs after attempting to save the new template. Has anyone ran into this issue in the past? Or have any clue how to solve this error?

I have set up a template for a driveway on a corridor I am working on. The corridor itself has ditches on both sides, and ties to existing terrain. I am looking for the best option when it comes to tieing the end conditions of the driveway into the…

I am having an issue that I can't seem to resolve.: When I RT click on an existing point and choose "Edit Point" the "Point Properties" dialog box opens and is completely blank. It doesn't matter which point I choose I get the same result. After I chose…

I think I may have a case of the Monday's here. I am looking to make an excavation template with two different slopes in InRoads. I want to start from an excavation bottom shape and have the template find the existing surface. The point at which the slope…

If you watch the Modeling Multiple Corridors in Roadway Designer video located here: It shows how to place end condition exceptions and to place new end conditions from a template. I created one with components and an end condition, like I thought was…

Trying to create the component, which is supposed to be turned fully on curves (by cant). The component is sleeper, which has geometry, which must turn in full, not just point by point. Therefore I use Angle Distance constraint from the Left and Right…

I have an end condition that I am attempting to have seek a feature XYZ. However, over a particular station range, the feature loops back on itself providing two solutions. Is there a way to have the end condition solve for on over the other without breaking…