• Re: PowerCivil locks up on new dataset creation

    I also get the same issue when trying to create a new dataset from a Trimble DC file in a completely different directory on a different drive in a new DGN file and a new project.

  • Re: PowerCivil locks up on new dataset creation

    For any following this post; The issue was caused by having empty fields in the Linking Codes, they need to be populated even if the codes are not been utilised. See the attached screen shot.

  • Re: License for PowerCivil for Americas V8i V 08.11.05.39

    We have finally managed to get a working license file, thank you to all those who had a part in achieving this.

  • Taverse adjustments

    Just a small "glitch" in the programming if you happen upon a perfect close traverse and try to store it using the traverse commands (i.e. Compass rule). You get an error stating that the desired accuracy is not achieved where in actual case it's infinitely…

  • Re: Inroads V8i?

    Marc, InRoads Group V8 i was released last week. Thanks, Jason

  • Re: Creating user defined coordinate system

    Hi Michael, Unfortunatley they do not exist amongst the supplied systems but the Geod.ma tool works great (as in previous versions) so that I can add the needed user defined systems. Thanks, Chris.

  • Creating user defined coordinate system

    Is there a way to create a new coordinate system (for geodetic conversions), as was possible in previous versions of PowerSurvey?

  • Control Editor issues

    There is a few issues with the Control Editor, the first being that the back sight (back bearing / azimuth) information does not come through (when reducing a Trimble DC file). I can only assume that this is also related to the instrument height issue…

  • Re: License for PowerCivil for Americas V8i V 08.11.05.39

    Phil, I should mention that we are in Australia, as when I called the toll-free support line (for Australia) they seemed to think that being in Australia would change the product(s) that we should be using, essentially that perhaps there is a better…

  • Pattern Area

    Hi. Is there a way. or macro or somthing to pattern area (Geopak PowerCivil v8i SS2) so that the cells stay in tact and like chess board. Elar

  • PowerCivil locks up on new dataset creation

    I am running PowerCivil for Americas V8i (as replacement for PowerSurvey GEOPAK). I am importing a new contour and feature survey and so have started with a blank 3D dgn file, created a new project and in the process of creating a new dataset…

  • InRoads File Compatibility problem "save down" a file?

    We are currently using Powersurvey V8i (SELECT series 2) - Version 08.11.07.428 and submitted some files to a local municipality. We were told that the files we submitted are not compatible with their version of InRoads V8i 08.1105.90. What would…

  • V8i Civil Product Refresh

    Hello Civil Users, There is a problem which can occur in the following product versions under specific circumstances which might interest you. Affected versions are: Bentley GEOPAK Civil Engineering Suite V8i - 08.11.05.31 Bentley GEOPAK…

  • Re: Instrument heights missing in PowerCivil V8i

    Derricke, I have emailed through the raw Trimble DC file through to Bentley Support. The DC file in question is a V10-70 and the instrument height field is indead preceded by the E0NM code, as seen below (underlined and in italics); …

  • Instrument heights missing in PowerCivil V8i

    I have just upgraded to PowerCivil for Americas V8i V 08.11.05.37 from PowerSurvey XM (as it is no longer supported). I am in the process of creating a new dataset by importing raw survey data from a Trimble DC file and have noticed that the instrument…

  • Re: License for PowerCivil for Americas V8i V 08.11.05.39

    Thanks Derricke, but unfortunately I still have not had any response.

  • Re: License for PowerCivil for Americas V8i V 08.11.05.39

    Phil, I have contacted our Account Manager several times regarding this issue and unfortunately the best they are able to offer us is a temporary evaluation license to GEOPAK Site, which of course requires the full version of MicroStation V8i,…

  • License for PowerCivil for Americas V8i V 08.11.05.39

    Bentley PowerCivil for Americas V8i V 08.11.05.39 Need license ASAP - we currently have licenses for Bentley PowerSurvey (GEOPAK) but the new version for this is the above mentioned PowerCivil version and so need the licenses for this…

  • Re: Power Civil: Contour Labeling

    Neil, I find the best way to label the contours is to use the settings is the "Load DTM features" dialog box. Here you can specify the text font, size, colour, level, decimal places and most importantly, the distance between labels. …

  • Re: License for PowerCivil for Americas V8i V 08.11.05.39

    I am still awaiting license files and have not had any response from Bentley Support on this issue yet.

  • Re: Taverse adjustments

    Thanks Robert.

  • Re: License for PowerCivil for Americas V8i V 08.11.05.39

    Does anyone have any idea when licensing for this product will be created for user's outside of the Americas? Does anyone have any idea when / if there will be a PowerCivil V8i released for use outside of the Americas? We need to start using…

  • Re: License for PowerCivil for Americas V8i V 08.11.05.39

    Derricke, It has been logged under Bentley Service Ticket number 8000486005 Thanks, Chris.
Communities
Support and Services
Training and Learning
Social Media