• imported survey points don't display like in SS2 & SS4

    I am trying to import survey points and have them show as they used to in SS2. when using the text import wizard on ORD I get the points displayed as "Decorations": what I need is for the point to show up like in SS2 and SS4 when they come in as…

  • InRoads SS2 Surface Creation Anomalies

    I have a 4 lane interstate with 4 ramps and some structures. I'm trying to perform the End Area Volume so that I can create the Mass Haul Diagram that the client wants. Towards the end of our section of the job is a large structure that I am trying to…

  • Roadway Designer - pavement warping vs. superelevation

    I am new to Geopak Corridor Modeler and am struggling with superelevation. Actually, pavement warping would be a better description. I have stations and cross slopes at exact locations for how we want the pavement to tip and where; at the beginning of…

  • Re: Import/Export Parametric Constraints

    Hi Chuck, This is planned to be fixed in the SELECT Update for InRoads Group V8i. Reference D-33623. Thanks for reporting this. Jason Smithey

  • corrupt .rdp?

    I have been working on a 6 mile corridor in Roadway Designer/Corridor Modeler for a year now when I attempted to import Plan Graphics the other day and Microstation crashed. I have 15 alignments I wish to store, and they used to import just fine. Now…

  • [Inroads v8i] Superelevation sections problem

    It seems that either there is a bug or I miss something in superelevation tool in roadway designer. I use wizard (ig. table method), adding sections and solviing overlaps - the superelevation is defined. Then I want to revise my superelevation's section…

  • Re: Superelevation doesn't work with Display Rules

    Our superelevation control is applied to the EOPs of our top layer of pavement. The lower layers of pavement are constrained with a slope equation equating to the slope of the top layer. So, these slopes are constrained back to the point controlled point…

  • Recommended system requirements

    We are relatively new to the Geopak version of Corridor Modeler/Roadway Designer (have been users a little over 6 months) having come from Geopak Road and Geopak Site background. I have experienced numerous computer crashes (Bentley exception errors)…

  • Trying to use plan graphics for an inside EOT but LT inside EOT crosses over to RT of alignment

    I am trying to use plan graphics to create my base model. I am creating a chain named IEOT_LT for the left inside edge of travel. I set the side to L but I realized the left IEOT actually crosses over to the right side of the alignment. I tried to use…

  • Corridor Modeler Template display - slopes

    When I hover over a ditch, my 4:1 foreslope displays at 25%. So I attempted to adjust by right mouse clicking in the section window of roadway designer, bringing up the "display template" dialog and entered the following, trying to switch it to an alternate…

  • [Inroads v8i SS1] clipped components are not displayed

    hi, I work with a few corridors and In roadway designer I create a single surface built of these corridors. In clipping options I set one corridor clipping another - as a result I get a designed surface. I am satisfied with this surface, howewer…
Communities
Support and Services
Training and Learning
Social Media