Setting up Input File Runner for MX v8i SS3

Jason Walsh — Tue, 04 Feb 2014 08:36:49 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jason Walsh on 2/4/2014 8:36:49 AM


	Applies To

	Product(s):	Bentley MXROAD
	Version(s):	08.11.09.493
	Environment:	N/A
	Area:	Input
	Subarea:	MX Tools
	Original Author:	Jason Walsh, Bentley Technical Support Group

Background

Many users have set up the Input file runner from the MX Benelux Tools add in (bnlxInpRunOnce.exe) to run input files via their file editors such as PSPAD. This wiki runs through an additional setup that is required to use this function in MX v8i SS3.

Steps to Accomplish

Open System Properties and go to the Advanced tab.

Click Environment Variables.
Go to the System Variables and select the Path variable

Select Edit to modify the list of variables. Add C:\Program Files (x86)\Common Files\Bentley Shared\MX\08.11.09 to the list as shown below. Make sure to place a semicolon between individual paths.

When you run the input via your editor it will now run into MX as it did in previous version.

Note: Do not delete any paths from the System Variables as this will impact software installed on the machine. You may need to restart your machine for the System Variables path change to take effect. If you are in doubt about making this change on your machine pass this wiki to your IT Department to implement for you.

Setting up Input File Runner for MX v8i SS3

Jason Walsh — Wed, 15 Jan 2014 14:33:29 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Jason Walsh on 1/15/2014 2:33:29 PM


	Applies To

	Product(s):	Bentley MXROAD
	Version(s):	08.11.09.493
	Environment:	N/A
	Area:	Import
	Subarea:	Lidar
	Original Author:	Jason Walsh, Bentley Technical Support Group

Background

Steps to Accomplish

Open System Properties and go to the Advanced tab.

Click Environment Variables.
Go to the System Variables and select the Path variable

Select Edit to modify the list of variables. Add C:\Program Files (x86)\Common Files\Bentley Shared\MX\08.11.09 to the list as shown below. Make sure to place a semicolon between individual paths.

When you run the input via your editor it will now run into MX as it did in previous version.

Note: Do not delete any paths from the System Variables as this will impact software installed on the machine. You may need to restart your machine for the System Variables path change to take effect. If you are in doubt about making this change on your machine pass this wiki to your IT Department to implement for you.

Setting up Input File Runner for MX v8i SS3

Jason Walsh — Tue, 14 Jan 2014 16:28:46 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jason Walsh on 1/14/2014 4:28:46 PM


	Applies To

	Product(s):	Bentley MXROAD
	Version(s):	08.11.09.493
	Environment:	N/A
	Area:	Import
	Subarea:	Lidar
	Original Author:	Jason Walsh, Bentley Technical Support Group

Background

Steps to Accomplish

Open System Properties and go to the Advanced tab.

Click Environment Variables.
Go to the System Variables and select the Path variable

Select Edit to modify the list of variables. Add C:\Program Files (x86)\Common Files\Bentley Shared\MX\08.11.09 to the list as shown below. Make sure to place a semicolon between individual paths.

When you run the input via your editor it will now run into MX as it did in previous version.

Note: Do not delete any paths from the System Variables as this will impact software installed on the machine. If you are in doubt about making this change on your machine pass this wiki to your IT Department to implement for you.

Setting up Input File Runner for MX v8i SS3

Setting up Input File Runner for MX v8i SS3

Background

Steps to Accomplish

See Also

Setting up Input File Runner for MX v8i SS3

Background

Steps to Accomplish

See Also

Setting up Input File Runner for MX v8i SS3

Background

Steps to Accomplish

See Also