Vertical Alignment Imported from Native into OpenRoads is Not Ruled

Jacquelyn Pettus — Fri, 17 Oct 2014 17:42:53 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 10/17/2014 5:42:53 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	General Geometry
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

I am attempting to import geometry into OpenRoads using the Import Geometry tool. However, one of the vertical alignments is imported but is not ruled. Why is this alignment not ruled when others are?

Answer:

If any of the following conditions are true, the imported geometry will not be ruled:

If the following is true then a "too many elements" message is produced:

Number of adjacent lines is greater than 20

If the following are true then a "too complex message" is produced:

The element is a circular vertical curve
Adjacent parabolas (i.e., reverse or compound)

Vertical Alignment Imported from Native into OpenRoads is Not Ruled

Beebe Ray — Thu, 17 Jul 2014 18:35:20 GMT

Revision 5 posted to OpenRoads | OpenSite Wiki by Beebe Ray on 7/17/2014 6:35:20 PM


	Applies To

	Product(s):	InRoads, GEOPAK, MX
	Version(s):	08.11.09.493
	Environment:	N/A
	Area:	Geometry
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Answer:

If any of the following conditions are true, the imported geometry will not be ruled:

If the following is true then a "too many elements" message is produced:

Number of adjacent lines is greater than 20

If the following are true then a "too complex message" is produced:

The element is a circular vertical curve
Adjacent parabolas (i.e., reverse or compound)

Vertical Alignment Imported from Native into OpenRoads is Not Ruled

Jacquelyn Pettus — Thu, 06 Mar 2014 17:07:15 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 3/6/2014 5:07:15 PM


	Applies To

	Product(s):	InRoads, GEOPAK, MX
	Version(s):	08.11.09.493
	Environment:	N/A
	Area:	Geometry
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Answer:

If any of the following conditions are true, the imported geometry will not be ruled:

If the following is true then a "too many elements" message is produced:

Number of adjacent lines is greater than 20

If the following are true then a "too complex message" is produced:

The element is a circular vertical curve
Adjacent parabolas (i.e., reverse or compound)

Vertical Alignment Imported from ALG into OpenRoads is Not Ruled

Jacquelyn Pettus — Thu, 06 Mar 2014 17:05:46 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 3/6/2014 5:05:46 PM


	Applies To

	Product(s):	InRoads, GEOPAK, MX
	Version(s):	08.11.09.493
	Environment:	N/A
	Area:	Geometry
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Answer:

If any of the following conditions are true, the imported geometry will not be ruled:

If the following is true then a "too many elements" message is produced:

Number of adjacent lines is greater than 20

If the following are true then a "too complex message" is produced:

The element is a circular vertical curve
Adjacent parabolas (i.e., reverse or compound)

Vertical Alignment Imported from ALG into OpenRoads is Not Ruled

Jacquelyn Pettus — Wed, 26 Feb 2014 17:32:24 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 2/26/2014 5:32:24 PM


	Applies To

	Product(s):	InRoads
	Version(s):	08.11.09.493
	Environment:	N/A
	Area:	Geometry
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

I am attempting to import an ALG into OpenRoads using the Import Geometry tool. However, one of the vertical alignments is imported but is not ruled. Why is this alignment not ruled when others are?

Answer:

If any of the following conditions are true, the imported geometry will not be ruled:

If the following is true then a "too many elements" message is produced:

Number of adjacent lines is greater than 20

If the following are true then a "too complex message" is produced:

The element is a circular vertical curve
Adjacent parabolas (i.e., reverse or compound)

Vertical Alignment Imported from ALG into OpenRoads is Not Ruled

Jacquelyn Pettus — Fri, 21 Feb 2014 19:46:02 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 2/21/2014 7:46:02 PM


	Applies To

	Product(s):	InRoads
	Version(s):	08.11.07.493
	Environment:	N/A
	Area:	Geometry
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Answer:

If any of the following conditions are true, the imported geometry will not be ruled:

If the following is true then a "too many elements" message is produced:

Number of adjacent lines is greater than 20

If the following are true then a "too complex message" is produced:

The element is a circular vertical curve
Adjacent parabolas (i.e., reverse or compound)