Define Template Drop Interval for Apply Linear Template Command in SS3/SS4

Jeff Wilson — Wed, 07 Jun 2017 18:03:46 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jeff Wilson on 6/7/2017 6:03:46 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Corridor Modeling
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Where is the template drop interval set when using a linear template along a corridor feature?

Answer:

The template drop interval is defined in the following MicroStation configuration variables:

CIVIL_DEFAULT_LINEAR_STROKING

CIVIL_DEFAULT_CURVE_STROKING

The linear stroking variable defines how often to compute a point or template drop interval location on a tangent segment. In general, for a curved segment the tool will use the smaller template drop interval computed from either the linear stroking or curve stroking value.

This variables are not used by Corridor Modeling. If not set, the default linear stroking value is 10 and default curve stroking value is 0.05. This is used when generating 3d elements and the Apply Linear Template command.

Tags: template drop, Apply Linear Template, Drop Interval

Define Template Drop Interval in SS3

Jacquelyn Pettus — Mon, 03 Nov 2014 17:49:37 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 11/3/2014 5:49:37 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Corridor Modeling
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Where is the template drop interval set when using a linear template along a corridor feature?

Answer:

Template drop interval is defined in the following MicroStation configuration variable:

CIVIL_DEFAULT_LINEAR_STROKING

This variable defines how often to compute a point or template drop interval location on a tangent segment.This variable is not used by Corridor Modeling. If not set, the value defaults to 10. This is used when generating 3d elements and the Apply Template command.

Define Template Drop Interval in SS3

Beebe Ray — Thu, 17 Jul 2014 17:34:13 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Beebe Ray on 7/17/2014 5:34:13 PM


	Applies To

	Product(s):	InRoads
	Version(s):	08.11.09.493
	Environment:	N/A
	Area:	Corridor Modeler
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Where is the template drop interval set when using a linear template along a corridor feature?

Answer:

Template drop interval is defined in the following MicroStation configuration variable:

CIVIL_DEFAULT_LINEAR_STROKING

Define Template Drop Interval in SS3

Jacquelyn Pettus — Fri, 21 Feb 2014 21:43:25 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 2/21/2014 9:43:25 PM


	Applies To

	Product(s):	InRoads
	Version(s):	08.11.09.493
	Environment:	N/A
	Area:	Corridor Modeler
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Where is the template drop interval set when using a linear template along a corridor feature?

Answer:

Template drop interval is defined in the following MicroStation configuration variable:

CIVIL_DEFAULT_LINEAR_STROKING

Define Template Drop Interval in SS3

Jacquelyn Pettus — Fri, 21 Feb 2014 20:18:11 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 2/21/2014 8:18:11 PM


	Applies To

	Product(s):	InRoads
	Version(s):	08.11.09.493
	Environment:	N/A
	Area:	Corridor Modeler
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Where is the template drop interval set when using a linear template along a corridor feature?

Answer:

Template drop interval is defined in the following MicroStation configuration variable:

CIVIL_DEFAULT_LINEAR_STROKING

This variable defines how often to compute a point or template drop interval location on a tangent segment.This variable is used by Corridor Modeling. If not set, the value defaults to 10. This is used when generating 3d elements and the Apply Template command.