Import IRD into OpenRoads

Jacquelyn Pettus — Wed, 05 Nov 2014 17:37:53 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 11/5/2014 5:37:53 PM

Product(s):	InRoads
Version(s):	08.11.09.674+
Area:	Corridor Modeling
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Is it possible to import an IRD into OpenRoads?

Answer:

A new command was added to OpenRoads in version 08.11.09.674: Import IRD

Please note the following:

Only one corridor at a time can be imported.
An imported corridor's baseline horizontal and vertical geometry must already exist in the design file or an attached reference file.
Imported corridors will always target the active terrain model, however it is possible to import a corridor without an active terrain model.

Dependencies:

Corridor dependencies include secondary alignment geometry, point controls and target aliasing.
A corridor’s missing dependencies will be reported at the time of import. The import can then be canceled or continued with missing dependencies.
Corridor objects that are missing a dependency will not be imported.For example, if a point control is a corridor feature point control, the corridor and the corridor feature must already exist. If they do not, the point control will not be imported.
In order for a Target Alias to be imported at least one of it’s dependencies must exist in the design model. Missing aliases will not be imported.
All dependencies will be matched by name with objects in the design model.

Import IRD into OpenRoads

Jacquelyn Pettus — Wed, 05 Nov 2014 17:37:31 GMT

Revision 5 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 11/5/2014 5:37:31 PM

Product(s):	InRoads
Version(s):	08.11.09.674+
Area:	Corridor Modeling
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Is it possible to import an IRD into OpenRoads?

Answer:

A new command was added to OpenRoads in version 08.11.09.674: Import IRD

Please note the following:

Only one corridor at a time can be imported.
An imported corridor's baseline horizontal and vertical geometry must already exist in the design file or an attached reference file.
Imported corridors will always target the active terrain model, however it is possible to import a corridor without an active terrain model.

Dependencies:

Corridor dependencies include secondary alignment geometry, point controls and target aliasing.
A corridor’s missing dependencies will be reported at the time of import. The import can then be canceled or continued with missing dependencies.
Corridor objects that are missing a dependency will not be imported.For example, if a point control is a corridor feature point control, the corridor and the corridor feature must already exist. If they do not, the point control will not be imported.
In order for a Target Alias to be imported at least one of it’s dependencies must exist in the design model. Missing aliases will not be imported.
All dependencies will be matched by name with objects in the design model.

Import IRD into OpenRoads

Kevin McDonald — Fri, 05 Sep 2014 15:32:50 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 9/5/2014 3:32:50 PM


	Applies To

	Product(s):	InRoads, GEOPAK, MX
	Version(s):	08.11.09.674+
	Environment:	N/A
	Area:	Corridor Modeling
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Is it possible to import an IRD into OpenRoads?

Answer:

A new command was added to OpenRoads in version 08.11.09.674: Import IRD

Please note the following:

Only one corridor at a time can be imported.
An imported corridor's baseline horizontal and vertical geometry must already exist in the design file or an attached reference file.
Imported corridors will always target the active terrain model, however it is possible to import a corridor without an active terrain model.

Dependencies:

Corridor dependencies include secondary alignment geometry, point controls and target aliasing.
A corridor’s missing dependencies will be reported at the time of import. The import can then be canceled or continued with missing dependencies.
Corridor objects that are missing a dependency will not be imported.
- For example, if a point control is a corridor feature point control, the corridor and the corridor feature must already exist. If they do not, the point control will not be imported.
In order for a Target Alias to be imported at least one of it’s dependencies must exist in the design model. Missing aliases will not be imported.
All dependencies will be matched by name with objects in the design model.

Import IRD into OpenRoads

Beebe Ray — Thu, 17 Jul 2014 17:56:11 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Beebe Ray on 7/17/2014 5:56:11 PM


	Applies To

	Product(s):	InRoads, GEOPAK, MX
	Version(s):	08.11.09.674+
	Environment:	N/A
	Area:	Corridor Modeling
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Is it possible to import an IRD into OpenRoads?

Answer:

A new command was added to OpenRoads in version 08.11.09.674: Import IRD

Please note the following:

Only one corridor at a time can be imported.
An imported corridor's baseline horizontal and vertical geometry must already exist in the design file or an attached reference file.
Imported corridors will always target the active terrain model, however it is possible to import a corridor without an active terrain model.

Import IRD into OpenRoads

Jacquelyn Pettus — Wed, 28 May 2014 17:34:36 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 5/28/2014 5:34:36 PM


	Applies To

	Product(s):	InRoads, GEOPAK, MX
	Version(s):	08.11.09.674+
	Environment:	N/A
	Area:	Corridor Modeling
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Is it possible to import an IRD into OpenRoads?

Answer:

A new command was added to OpenRoads in version 08.11.09.674: Import IRD

Please note the following:

Only one corridor at a time can be imported.
An imported corridor's baseline horizontal and vertical geometry must already exist in the design file or an attached reference file.
Imported corridors will always target the active terrain model, however it is possible to import a corridor without an active terrain model.

Import IRD into OpenRoads

Jacquelyn Pettus — Wed, 12 Mar 2014 20:46:31 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 3/12/2014 8:46:31 PM


	Applies To

	Product(s):	InRoads, GEOPAK, MX
	Version(s):	08.11.09.674+
	Environment:	N/A
	Area:	Corridor Modeling
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

Is it possible to import an IRD into OpenRoads?

Answer:

A new command was added to OpenRoads in version 08.11.09.674: Import IRD

Please note the following:

- Only one corridor at a time can be imported.

- An imported corridor's baseline horizontal and vertical geometry must already exist in the design file or an attached reference file.

- Imported corridors will always target the active terrain model, however it is possible to import a corridor without an active terrain model.