Unable to Access Survey, Civil Standards or Civil Model in Project Explorer

Jacquelyn Pettus — Tue, 14 Oct 2014 18:26:44 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 10/14/2014 6:26:44 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Basic Settings
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Problem:

When I launch OpenRoads SS3, I do not have the Survey, Civil Standards or Civil Model browsers available in Project Explorer.

Solution:

To redisplay any of the Project Explorer browsers, go to Settings > Project Explorer. Set the browser values to "True" if you wish for them to be displayed.

If you find that these settings are not being saved when exiting the product, a likely reason is that the same workspace is being used for both SS2 and SS3 products. The best practice is to keep SS2 and SS3 workspaces separate.

Unable to Access Survey, Civil Standards or Civil Model in Project Explorer

Beebe Ray — Thu, 17 Jul 2014 18:22:14 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Beebe Ray on 7/17/2014 6:22:14 PM


	Applies To

	Product(s):	InRoads, GEOPAK, MX
	Version(s):	08.11.09.674
	Environment:	N/A
	Area:	General
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Problem:

When I launch OpenRoads SS3, I do not have the Survey, Civil Standards or Civil Model browsers available in Project Explorer.

Solution:

To redisplay any of the Project Explorer browsers, go to Settings > Project Explorer. Set the browser values to "True" if you wish for them to be displayed.

Unable to Access Survey, Civil Standards or Civil Model in Project Explorer

Jacquelyn Pettus — Fri, 11 Apr 2014 18:42:48 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 4/11/2014 6:42:48 PM


	Applies To

	Product(s):	InRoads, GEOPAK, MX
	Version(s):	08.11.09.674
	Environment:	N/A
	Area:	General
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Problem:

When I launch OpenRoads SS3, I do not have the Survey, Civil Standards or Civil Model browsers available in Project Explorer.

Solution:

To redisplay any of the Project Explorer browsers, go to Settings > Project Explorer. Set the browser values to "True" if you wish for them to be displayed.

Unable to Access Survey, Civil Standards or Civil Model in Project Explorer

Jacquelyn Pettus — Fri, 11 Apr 2014 18:42:06 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 4/11/2014 6:42:06 PM


	Applies To

	Product(s):	InRoads, GEOPAK, MX
	Version(s):	08.11.09.674
	Environment:	N/A
	Area:	General
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Problem:

When I launch OpenRoads SS3, I do not have the Survey, Civil Standards or Civil Model browsers available in Project Explorer.

Solution:

To redisplay any of the Project Explorer browsers, go to Settings > Project Explorer. Set the browser values to "True" if you wish for them to be displayed.