MX SS3 not Annotating all the cross section

Purva Lakde — Mon, 02 Jun 2014 12:36:43 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Purva Lakde on 6/2/2014 12:36:43 PM

Steps to reproduce:

Import survey and design.txt file using File > Import > ASCII file. Please refer the attached surveyGENIO.ZIP file for your reference.

SNC ON (String Naming Convention):

1. Analysis > Sections > Create New Cross Section.

2. Reference Model : DESIGN MARSDEN PARK, string name : MC00 and check on all the options.

3. Select description Design and Existing ground for DESIGN MARSDEN PARK and SURVEY TRIANGLES.

4. Select "Constant Interval" under select method in section location dialog box and

Start Chainage = 100

End Chainage = 1200

Interval = 50

ADD > Hit Apply

5. Select position "Defined by XY" > Apply.

6. Use Final Drawings option to annotate the cross sections.

7. MX-Road V8i fall over annotating the cross section using final drawings as shown below.

Workaround:

SNC Off (String Naming Convention):

Follow the same steps as shown above and it will annotate the cross sections without any error.

Purva Lakde — Mon, 02 Jun 2014 12:35:46 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Purva Lakde on 6/2/2014 12:35:46 PM