What do the different fill colors mean in OpenRoads superelevation?

Jacquelyn Pettus — Wed, 05 Nov 2014 18:58:14 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 11/5/2014 6:58:14 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Superelevation
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

After creating superelevation sections, I notice that the on screen graphics display the superelevation lanes in color-coded fill? What do the different fill colors mean?

Answer:

Color Shaded Fill Color fills superelevation lanes AFTER calculations are complete. The coloring is hard-coded based on the cross slope:

slope < -10% =blue
-10% <= slope <= -0.5% = Calculated color between green and blue
-0.5% < slope < 0.5% = white
0.5% <= slope <= 10% = Calculated color between red and yellow
slope > 10% = dark red

Based on the side of road, the colors flip. In addition to setting this option, the View Attribute for Fill must also be toggled on.

What do the different fill colors mean in OpenRoads superelevation?

Beebe Ray — Thu, 17 Jul 2014 18:37:29 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Beebe Ray on 7/17/2014 6:37:29 PM


	Applies To

	Product(s):	InRoads, MX, GEOPAK
	Version(s):	08.11.09.674
	Area:	Corridor Modeling
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

After creating superelevation sections, I notice that the on screen graphics display the superelevation lanes in color-coded fill? What do the different fill colors mean?

Answer:

Color Shaded Fill Color fills superelevation lanes AFTER calculations are complete. The coloring is hard-coded based on the cross slope:

slope < -10% =blue
-10% <= slope <= -0.5% = Calculated color between green and blue
-0.5% < slope < 0.5% = white
0.5% <= slope <= 10% = Calculated color between red and yellow
slope > 10% = dark red

Based on the side of road, the colors flip. In addition to setting this option, the View Attribute for Fill must also be toggled on.

What do the different fill colors mean in OpenRoads superelevation?

Jacquelyn Pettus — Thu, 05 Jun 2014 16:12:00 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 6/5/2014 4:12:00 PM


	Applies To

	Product(s):	InRoads, MX, GEOPAK
	Version(s):	08.11.09.674
	Area:	Corridor Modeling
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

After creating superelevation sections, I notice that the on screen graphics display the superelevation lanes in color-coded fill? What do the different fill colors mean?

Answer:

Color Shaded Fill Color fills superelevation lanes AFTER calculations are complete. The coloring is hard-coded based on the cross slope:

slope < -10% =blue
-10% <= slope <= -0.5% = Calculated color between green and blue
-0.5% < slope < 0.5% = white
0.5% <= slope <= 10% = Calculated color between red and yellow
slope > 10% = dark red

Based on the side of road, the colors flip. In addition to setting this option, the View Attribute for Fill must also be toggled on.