What are Intervals and Gaps in SS3?

Jacquelyn Pettus — Fri, 17 Oct 2014 18:08:49 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 10/17/2014 6:08:49 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Horizontal Geometry
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

What are intervals and gaps?

Answer:

When a geometry feature is trimmed or extended, the portion(s) of the modified element which is visible and is being displayed using the Feature Definition settings is called the "interval".

The portion(s) of the original geometry which is not visible is called the "gap". This is the representation of the location of original element before modification. The gap will be displayed when you hover over the original element.

An interval element is ruled to the original geometry (or "gap" element), and this dependency can be viewed in the Civil Model tab in the Project Explorer:

What are Intervals and Gaps in SS3?

Kevin McDonald — Mon, 22 Sep 2014 16:22:21 GMT

Revision 5 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 9/22/2014 4:22:21 PM


	Applies To

	Product(s):	InRoads, MX, GEOPAK
	Version(s):	08.11.09.674
	Area:	Geometry
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

What are intervals and gaps?

Answer:

When a geometry feature is trimmed or extended, the portion(s) of the modified element which is visible and is being displayed using the Feature Definition settings is called the "interval".

An interval element is ruled to the original geometry (or "gap" element), and this dependency can be viewed in the Civil Model tab in the Project Explorer:

What are Intervals and Gaps in SS3?

Jacquelyn Pettus — Wed, 23 Jul 2014 22:06:38 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 7/23/2014 10:06:38 PM


	Applies To

	Product(s):	InRoads, MX, GEOPAK
	Version(s):	08.11.09.674
	Area:	Geometry
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

What are intervals and gaps?

Answer:

When a geometry feature is trimmed, the portions(s) which are visible on the base geometry are called "intervals". The portion(s) which are not visible are called "gaps".

What are Intervals and Gaps in SS3?

Beebe Ray — Thu, 17 Jul 2014 18:37:01 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Beebe Ray on 7/17/2014 6:37:01 PM


	Applies To

	Product(s):	InRoads, MX, GEOPAK
	Version(s):	08.11.09.674
	Area:	Geometry
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

What are intervals and gaps?

Answer:

When a geometry feature is trimmed, the portions(s) which are visible on the base geometry are called "intervals". The portion(s) which are not visible are called "gaps".

What are Intervals and Gaps in SS3?

Jacquelyn Pettus — Fri, 11 Jul 2014 13:37:51 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 7/11/2014 1:37:51 PM


	Applies To

	Product(s):	InRoads, MX, GEOPAK
	Version(s):	08.11.09.674
	Area:	Geometry
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

What are intervals and gaps?

Answer:

When a geometry feature is trimmed, the portions(s) which are visible on the base geometry are called "intervals". The portion(s) which are not visible are called "gaps".

What are Intervals and Gaps in SS3?

Jacquelyn Pettus — Fri, 13 Jun 2014 22:58:55 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 6/13/2014 10:58:55 PM


	Applies To

	Product(s):	InRoads, MX, GEOPAK
	Version(s):	08.11.09.674
	Area:	Geometry
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

What is an interval?

Answer:

When a geometry feature is trimmed, the portions(s) which are visible on the base geometry are called "intervals". The portion(s) which are not visible are called "gaps".