Runtime Error 91 when running Cross Section Labeler

Beebe Ray — Wed, 18 Jul 2018 12:43:38 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Beebe Ray on 7/18/2018 12:43:38 PM


	Applies To

	Product(s):	Bentley GEOPAK Civil Engineering Suite
	Version(s):	08.11.07.615
	Environment:	N/A
	Area:	Corridor Modeler Cross Section Labeler
	Subarea:
	Original Author:	Beebe Ray, Bentley Technical Support Group

Problem Description

When opening the Cross Section Labeler the user gets a Runtime Error 91 message.

Solution

This has been known to occur when a cross section in the dgn file exist but the chain that the cross section is from has been deleted or renamed in the GPK file. You would want to rerun the Draw Cross Sections from Surfaces command and create new cross sections in a fresh DGN file.

You can get an updated version of the xsLabeler.mvba from the link below:

http://communities.bentley.com/products/road___site_design/m/road_and_site_design_gallery/269919.aspx

This issue has also been know to occur if the gpk file has corrupt information in it. The workaround is to make an input file of all the data in your gpk file

(keyin: Make input file new123.ioc all) This will create an input file called New that if you create a blank gpk file called job123.gpk and open that up as user oc you will be able to read the input file New into that file essentially getting all the data from the old file into the new file minus the corrupt data.

Then you can try running the labeler again. The labeler is try to load all the gpk data from every gpk in the folder and it crashes on corrupt data. If you have multiple gpk files in the same folder then check those as well.

Tags: xsLabeler, Cross Section Labeler, Runtime Error 91, corridor modeler, cm, xs

Runtime Error 91 when running Cross Section Labeler

Nico Roman — Tue, 17 Jun 2014 13:15:37 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by Nico Roman on 6/17/2014 1:15:37 PM


	Applies To

	Product(s):	Bentley GEOPAK Civil Engineering Suite
	Version(s):	08.11.07.615
	Environment:	N/A
	Area:	Corridor Modeler Cross Section Labeler
	Subarea:
	Original Author:	Beebe Ray, Bentley Technical Support Group

Problem Description

When opening the Cross Section Labeler the user gets a Runtime Error 91 message.

Solution

You can get an updated version of the xsLabeler.mvba from the link below:

http://communities.bentley.com/products/road___site_design/m/road_and_site_design_gallery/269919.aspx

Tags: xsLabeler, Cross Section Labeler, Runtime Error 91, corridor modeler, cm, xs

Runtime Error 91 when running Cross Section Labeler

Beebe Ray — Tue, 17 Jun 2014 12:47:24 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Beebe Ray on 6/17/2014 12:47:24 PM


	Applies To

	Product(s):	Bentley GEOPAK Civil Engineering Suite
	Version(s):	08.11.07.615
	Environment:	N/A
	Area:	Corridor Modeler Cross Section Labeler
	Subarea:
	Original Author:	Beebe Ray, Bentley Technical Support Group

Problem Description

When opening the Cross Section Labeler the user gets a Runtime Error 91 message.

Solution

You can get an updated version of the xsLabeler.mvba from the link below:

http://communities.bentley.com/products/road___site_design/m/road_and_site_design_gallery/269919.aspx

Tags: xsLabeler, Cross Section Labeler, Runtime Error 91, corridor modeler

Runtime Error 91 when running Cross Section Labeler

Beebe Ray — Tue, 17 Jun 2014 12:41:04 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Beebe Ray on 6/17/2014 12:41:04 PM


	Applies To

	Product(s):	Bentley GEOPAK Civil Engineering Suite
	Version(s):	08.11.07.615
	Environment:	N/A
	Area:	Corridor Modeler Cross Section Labeler
	Subarea:
	Original Author:	Beebe Ray, Bentley Technical Support Group

Problem Description

When opening the Cross Section Labeler the user gets a Runtime Error 91 message.

Solution

Tags: xsLabeler, Cross Section Labeler, Runtime Error 91, corridor modeler

Runtime Error 91 when running Cross Section Labeler

Beebe Ray — Tue, 17 Jun 2014 12:37:36 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Beebe Ray on 6/17/2014 12:37:36 PM


	Applies To

	Product(s):	Bentley GEOPAK Civil Engineering Suite
	Version(s):	08.11.07.615
	Environment:	N/A
	Area:	Corridor Modeler
	Subarea:
	Original Author:	Beebe Ray, Bentley Technical Support Group

Problem Description

When opening the Cross Section Labeler the user gets a Runtime Error 91 message.

Solution

Tags: xsLabeler, Cross Section Labeler, Runtime Error 91, corridor modeler