"No content available to display" in Item Browser

Nico Roman — Wed, 01 Feb 2017 19:21:49 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Nico Roman on 2/1/2017 7:21:49 PM

Product(s):	InRoads, MX, GEOPAK, POWERGEOPAK, POWERINROADS
Version(s):	08.11.09+
Area:	Basic Settings
Original Author:	Bentley Technical Support Group

Problem:

When attempting to open the MicroStation Item Browser, it appears disabled and displays the message "No content available to display". Furthermore, the Tree Manager is empty and the "New" button does not work. This problem only occurs when OpenRoads is loaded.

Solution:

This issue is works as designed. The Item Browser has been intentionally disabled when the civil data loads. It is possible to edit a configuration file to restore the items in the browser.

Exit MicroStation OR POWERGEOPAK
Locate the file Bentley Civil Commands.cfg. This file can be found in

C:\Program Files (x86)\Common Files\Bentley Shared\Civil Platform\08.11.09\.

for Power products go to

C:\Program Files (x86)\Bentley\PowerGEOPAK V8i (878)\PowerGEOPAK\CivilPlatform

Open this file in Notepad. You will need admin privileges to edit this file

Comment out two lines in this CFG file by placing a hashtag (#) in front of the lines. The two lines are shown highlighted below:

It should look like this:

Save the CFG file and restart Microstation or PowerGeopak

Tags: Item Browser, PowerGeoPak, Item

"No content available to display" in Item Browser

Jacquelyn Pettus — Tue, 14 Oct 2014 17:16:42 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 10/14/2014 5:16:42 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Basic Settings
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Problem:

Solution:

This issue is works as designed. The Item Browser has been intentionally disabled when the civil data loads. It is possible to edit a configuration file to restore the items in the browser.

Exit MicroStation.
Locate the file Bentley Civil Commands.cfg. This file can be found in C:\Program Files (x86)\Common Files\Bentley Shared\Civil Platform\08.11.09\.
Open this file in Notepad.
Comment out two lines in this CFG file by placing a hashtag (#) in front of the lines. The two lines are shown highlighted below:

It should look like this:
Save the CFG file and restart InRoads/MX/GEOPAK.

"No content available to display" in Item Browser

Jacquelyn Pettus — Thu, 17 Jul 2014 14:14:35 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 7/17/2014 2:14:35 PM


	Applies To

	Product(s):	InRoads, MX, GEOPAK
	Version(s):	08.11.09.674
	Area:	General
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Problem:

Solution:

This issue is works as designed. The Item Browser has been intentionally disabled when the civil data loads. It is possible to edit a configuration file to restore the items in the browser.

Exit MicroStation.
Locate the file Bentley Civil Commands.cfg. This file can be found in C:\Program Files (x86)\Common Files\Bentley Shared\Civil Platform\08.11.09\.
Open this file in Notepad.
Comment out two lines in this CFG file by placing a hashtag (#) in front of the lines. The two lines are shown highlighted below:

It should look like this:
Save the CFG file and restart InRoads/MX/GEOPAK.