Error Message: Obsolete Civil Data Found

Jacquelyn Pettus — Thu, 28 Jan 2016 19:22:40 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 1/28/2016 7:22:40 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Basic Settings
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Problem:

When opening a DGN file, I receive the following message: "Obsolete Civil Data Found..." Why am I receiving this message?

Solution:

If you are opening the DGN in SELECT series 3, you may receive this message:

This warning message indicates that the DGN file contains civil data that was created in a previous InRoads/GEOPAK/MX version. For example, it may have roundabout elements or civil geometry that was created in SS2. This civil data will need to be upgraded so that it will be compatible with SS3 OpenRoads civil data.

Note: After upgrading the data, it will no longer be recognized as civil data in SS2. If you open the DGN in SS2 and attempt to run a Civil Geometry Command you will receive the following message dialog:

If you are opening the DGN in SELECT series 4, you may receive this message:

The reason for this message is that to facilitate increased functionality of model interoperability available in SELECTseries 4 and beyond, it is necessary to add additional element information to the civil model. Where existing civil data is found in a drawing, the data can be upgraded, left as is and opened in a read only state, or the session can be closed.

Note: If you select "Yes" to upgrade the data in the file, you will not be able to reopen the file in SELECT series 3. You will receive the following message when you attempt to open the DGN, and the only option will be to exit MicroStation:

You will still be able to open the DGN in SELECT series 2 after upgrading the data; however, it will no longer be recognized as civil data in SS2. If you open the DGN in SS2 and attempt to run a Civil Geometry Command, you will receive the following message dialog:

Tags: upgrade, obsolete civil data, Civil Geometry mismatched, DGN, Civil Data

Error Message: Obsolete Civil Data Found

Jacquelyn Pettus — Thu, 12 Feb 2015 19:10:38 GMT

Revision 5 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 2/12/2015 7:10:38 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Basic Settings
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Problem:

When opening a DGN file, I receive the following message: "Obsolete Civil Data Found..." Why am I receiving this message?

Solution:

If you are opening the DGN in SELECT series 3, you may receive this message:

If you are opening the DGN in SELECT series 4, you may receive this message:

Tags: obsolete civil data, Civil Geometry mismatched, Civil Data

Error Message: Obsolete Civil Data Found

Jacquelyn Pettus — Fri, 09 Jan 2015 15:43:56 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 1/9/2015 3:43:56 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Basic Settings
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Problem:

When opening a DGN file, I receive the following message: "Obsolete Civil Data Found..." Why am I receiving this message?

Solution:

If you are opening the DGN in SELECT series 3, you will receive this message:

If you are opening the DGN in SELECT series 4, you will receive this message:

You will still be able to open the DGN in SELECT series 2, however, after upgrading the data, it will no longer be recognized as civil data in SS2. If you open the DGN in SS2 and attempt to run a Civil Geometry Command you will receive the following message dialog:

Tags: obsolete civil data, Civil Geometry mismatched, Civil Data

Error Message: Obsolete Civil Data Found

Jacquelyn Pettus — Tue, 14 Oct 2014 17:46:06 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 10/14/2014 5:46:06 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Basic Settings
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Problem:

When opening a DGN file, I receive the following message: "Obsolete Civil Data Found. Press Yes to upgrade the data in the file. Press No to exit MicroStation." Why am I receiving this message?

Solution:

Note: After upgrading the data, it will no longer be recognized as civil data in SS2. So if you open the DGN in SS2 and try and run a Civil Geometry Command you will get a message dialog like the following.

Tags: obsolete civil data, Civil Geometry mismatched, Civil Data

Error Message: Obsolete Civil Data Found

Beebe Ray — Wed, 10 Sep 2014 12:58:03 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Beebe Ray on 9/10/2014 12:58:03 PM


	Applies To

	Product(s):	InRoads, MX, GEOPAK
	Version(s):	08.11.09.674
	Area:	General
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

When opening a DGN file, I receive the following message: "Obsolete Civil Data Found. Press Yes to upgrade the data in the file. Press No to exit MicroStation." Why am I receiving this message?

Answer:

Tags: obsolete civil data, Civil Geometry mismatched, Civil Data

Error Message: Obsolete Civil Data Found

Jacquelyn Pettus — Wed, 23 Jul 2014 15:18:01 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 7/23/2014 3:18:01 PM


	Applies To

	Product(s):	InRoads, MX, GEOPAK
	Version(s):	08.11.09.674
	Area:	General
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

When opening a DGN file, I receive the following message: "Obsolete Civil Data Found. Press Yes to upgrade the data in the file. Press No to exit MicroStation." Why am I receiving this message?

Answer:

Note: After upgrading the data, it will no longer be recognized as civil data in SS2.