Profile Direction within Plan and Profile Generator

Sanders Thomas — Fri, 26 Jun 2015 15:22:54 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Sanders Thomas on 6/26/2015 3:22:54 PM


	Applies To

	Product(s):	InRoads
	Version(s):	08.11.07.615
	Area:	Drafting
	Original Author:	Sanders Thomas, Bentley Technical Support Group

Question:

Within the Plan and Profile Generator, I would like for my profiles to read Right to Left and not Left to Right as they currently read.

Answer:

Create a preference within Evaluation>Profile>Create Profile. On the General leaf, Direction, you can select the direction for which your profile will read and save preference.

Within Plan and Profile Generator, select the Profile Controls tab and at Profile Preference, select the newly created preference that defines your desired reading direction.

Profile Direction within Plan and Profile Generator

Sanders Thomas — Fri, 15 Aug 2014 11:47:06 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Sanders Thomas on 8/15/2014 11:47:06 AM


	Applies To

	Product(s):	InRoads
	Version(s):	08.11.07.615
	Area:	Drafting
	Original Author:	Sanders Thomas, Bentley Technical Support Group

Question:

Within the Plan and Profile Generator, I would like for my profiles to read Left to Right and not Right to Left as they currently read.

Answer:

Create a preference within Evaluation>Profile>Create Profile. On the General leaf, Direction, you can select the direction for which your profile will read and save preference.

Within Plan and Profile Generator, select the Profile Controls tab and at Profile Preference, select the newly created preference that defines your desired reading direction.

Profile Direction within Plan and Profile Generator

Sanders Thomas — Fri, 15 Aug 2014 11:45:59 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Sanders Thomas on 8/15/2014 11:45:59 AM


	Applies To

	Product(s):	InRoads
	Version(s):	08.11.07.615
	Area:	Drafting
	Original Author:	Sanders Thomas, Bentley Technical Support Group

Question:

Within the Plan and Profile Generator, I would like for my profiles to read Left to Right and not Right to Left as they currently read.

Answer:

Create a preference within Evaluation>Profile>Create Profile. On the General leaf, Direction, you can select the direction for which your profile will read and save preference. Within Plan and Profile Generator, select the Profile Controls tab and at Profile Preference, select the newly created preference that defines your desired reading direction.