Non-Tangential Alignment fails to create profile as the "Working Drawings" button is grayed out.

Purva Lakde — Mon, 18 Aug 2014 11:03:58 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Purva Lakde on 8/18/2014 11:03:58 AM

Applies To

	Product(s):	Bentley MXROAD
	Version(s):	08.11.07.566,08.11.09.493 & MXROAD V8i
	Environment:	N/A
	Area:	Analysis
	Subarea:	Profiles
	Original Author:	Purva Lakde. Product Advantage Group

Problem Description:

Create Non-Tangential Project (Check on Non-Tangential Alignment) and go to Analysis > Create Profiles , you will see the "Working Drawings" button is grayed out and hence fails to generate profiles.

Note: Please refer the below link in which attached the dataset for testing.

http://communities.bentley.com/products/road___site_design/m/road_and_site_design_gallery/270138.aspx

Workaround:

In the Add-Ins pull down there is a PreXM Long Sections tool which takes you to the old Long section viewer. This has a working drawings option which appears to be OK when using a Non-tangential alignment.