Failed to Persist message when Exporting to Native

Jacquelyn Pettus — Fri, 17 Oct 2014 17:25:10 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 10/17/2014 5:25:10 PM

Product(s):	MX
Version(s):	08.11.09+
Area:	General Geometry
Original Author:	Jason Walsh, Bentley Technical Support Group

Error Message:

'Failed to Persist - check an active model has been selected' shows in Message Centre

Solution 1: MX Model Changed:

When an OpenRoads element has been Exported to Native (MX Model) additional information is stored in the OpenRoads element linking it to the native model.

The image below is the Element information panel for a just created element.

The image below is the Element information panel for the same element after it has been exported to native, this shows the MX model and string name now associated with this element.

Changing the MX model from DESIGN IMPORT to DESIGN IMPORT 2 in the Feature Definition Toggle Bar as below and re-exported that element to native will display a Failed to Persist message.

The Failed to Persist message appears due to the element already being linked to an MX model when it was originally exported to native.

How to Resolve

If you require the element to be exported to another MX model you can change the Model Name in the dropdown list of the Element information panel as below.

This will move the element to that model. The Export to Native function will now work as the Feature Definition Toggle Bar has been set to match the MX model linked with the OpenRoads Element.

Solution 2: MX String Removed:

When the MX string linked with the OpenRoads Element has been deleted from the MX model the Failed to Persist message appears when re-exported to native.

How to Resolve

Select the element and go to the Element information panel. Click into the string name box.

Hit the Enter key and this will re-create the string in the MX model. The Export to Native function will now work as a corresponding string now exists in the model to be updated.

Tags: native, Export, MX Model

Failed to Persist message when Exporting to Native

Jacquelyn Pettus — Fri, 17 Oct 2014 17:24:24 GMT

Revision 5 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 10/17/2014 5:24:24 PM

Product(s):	MX
Version(s):	08.11.09+
Area:	General Geometry
Original Author:	Jason Walsh, Bentley Technical Support Group

Error Message:

'Failed to Persist - check an active model has been selected' shows in Message Centre

Solution 1: MX Model Changed:

When an OpenRoads element has been Exported to Native (MX Model) additional information is stored in the OpenRoads element linking it to the native model.

The image below is the Element information panel for a just created element.

The image below is the Element information panel for the same element after it has been exported to native, this shows the MX model and string name now associated with this element.

Changing the MX model from DESIGN IMPORT to DESIGN IMPORT 2 in the Feature Definition Toggle Bar as below and re-exported that element to native will display a Failed to Persist message.

The Failed to Persist message appears due to the element already being linked to an MX model when it was originally exported to native.

How to Resolve

If you require the element to be exported to another MX model you can change the Model Name in the dropdown list of the Element information panel as below.

This will move the element to that model. The Export to Native function will now work as the Feature Definition Toggle Bar has been set to match the MX model linked with the OpenRoads Element.

Solution 1: MX String Removed:

When the MX string linked with the OpenRoads Element has been deleted from the MX model the Failed to Persist message appears when re-exported to native.

How to Resolve

Select the element and go to the Element information panel. Click into the string name box.

Hit the Enter key and this will re-create the string in the MX model. The Export to Native function will now work as a corresponding string now exists in the model to be updated.

Tags: native, Export, MX Model

Failed to Persist message when Exporting to Native

Jacquelyn Pettus — Fri, 17 Oct 2014 17:18:31 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 10/17/2014 5:18:31 PM

Product(s):	MX
Version(s):	08.11.09+
Area:	General Geometry
Original Author:	Jason Walsh, Bentley Technical Support Group

Error Message:

'Failed to Persist - check an active model has been selected' shows in Message Centre

Explanation 1 - MX Model Changed

When an OpenRoads element has been Exported to Native (MX Model) additional information is stored in the OpenRoads element linking it to the native model.

The image below is the Element information panel for a just created element.

The image below is the Element information panel for the same element after it has been exported to native, this shows the MX model and string name now associated with this element.

Changing the MX model from DESIGN IMPORT to DESIGN IMPORT 2 in the Feature Definition Toggle Bar as below and re-exported that element to native will display a Failed to Persist message.

The Failed to Persist message appears due to the element already being linked to an MX model when it was originally exported to native.

How to Resolve

If you require the element to be exported to another MX model you can change the Model Name in the dropdown list of the Element information panel as below.

This will move the element to that model. The Export to Native function will now work as the Feature Definition Toggle Bar has been set to match the MX model linked with the OpenRoads Element.

Explanation 2 - MX String Removed

When the MX string linked with the OpenRoads Element has been deleted from the MX model the Failed to Persist message appears when re-exported to native.

How to Resolve

Select the element and go to the Element information panel. Click into the string name box.

Hit the Enter key and this will re-create the string in the MX model. The Export to Native function will now work as a corresponding string now exists in the model to be updated.

Failed to Persist message when Exporting to Native

Jason Walsh — Wed, 01 Oct 2014 14:10:44 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Jason Walsh on 10/1/2014 2:10:44 PM


	Applies To

	Product(s):	Bentley MXROAD
	Version(s):	08.11.09.494, 08.11.09.674, 08.11.09.722
	Environment:	N/A
	Area:	Display
	Subarea:	N/A
	Original Author:	Jason Walsh, Bentley Technical Support Group

Error Message

'Failed to Persist - check an active model has been selected' shows in Message Centre

Explanation 1 - MX Model Changed

When an OpenRoads element has been Exported to Native (MX Model) additional information is stored in the OpenRoads element linking it to the native model.

The image below is the Element information panel for a just created element.

The image below is the Element information panel for the same element after it has been exported to native, this shows the MX model and string name now associated with this element.

Changing the MX model from DESIGN IMPORT to DESIGN IMPORT 2 in the Feature Definition Toggle Bar as below and re-exported that element to native will display a Failed to Persist message.

The Failed to Persist message appears due to the element already being linked to an MX model when it was originally exported to native.

How to Resolve

If you require the element to be exported to another MX model you can change the Model Name in the dropdown list of the Element information panel as below.

This will move the element to that model. The Export to Native function will now work as the Feature Definition Toggle Bar has been set to match the MX model linked with the OpenRoads Element.

Explanation 2 - MX String Removed

When the MX string linked with the OpenRoads Element has been deleted from the MX model the Failed to Persist message appears when re-exported to native.

How to Resolve

Select the element and go to the Element information panel. Click into the string name box.

Hit the Enter key and this will re-create the string in the MX model. The Export to Native function will now work as a corresponding string now exists in the model to be updated.

Failed to Persist message when Exporting to Native

Jason Walsh — Wed, 01 Oct 2014 12:37:42 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Jason Walsh on 10/1/2014 12:37:42 PM


	Applies To

	Product(s):	Bentley MXROAD
	Version(s):	08.11.09.494, 08.11.09.674, 08.11.09.722
	Environment:	N/A
	Area:	Display
	Subarea:	N/A
	Original Author:	Jason Walsh, Bentley Technical Support Group

Error Message

'Failed to Persist - check an active model has been selected' shows in Message Centre

Explanation

When an OpenRoads element has been Exported to Native (MX Model) additional information is stored in the OpenRoads element linking it to the native model.

The image below is the Element information panel for a just created element.

The image below is the Element information panel for the same element after it has been exported to native, this shows the MX model and string name now associated with this element.

Changing the MX model from DESIGN IMPORT to DESIGN IMPORT 2 in the Feature Definition Toggle Bar as below and re-exported that element to native will display a Failed to Persist message.

The Failed to Persist message appears due to the element already being linked to an MX model when it was originally exported to native.

How to Avoid

If you require the element to be exported to another MX model you can change the Model Name in the dropdown list of the Element information panel as below.

This will move the element to that model. the Export to Native function will now work as the Feature Definition Toggle Bar has been set to match the MX model linked with the OpenRoads Element.

Failed to Persist message when Exporting to Native

Jason Walsh — Wed, 01 Oct 2014 12:35:50 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jason Walsh on 10/1/2014 12:35:50 PM


	Applies To

	Product(s):	Bentley MXROAD
	Version(s):	08.11.09.494, 08.11.09.674, 08.11.09.722
	Environment:	N/A
	Area:	Display
	Subarea:	N/A
	Original Author:	Jason Walsh, Bentley Technical Support Group

Error Message

'Failed to Persist - check an active model has been selected' shows in Message Centre

Explanation

When an OpenRoads element has been Exported to Native (MX Model) additional information is stored in the element linking it to the native model.

The image below is the Element information panel for a just created OpenRoads element.

The image below is the Element information panel for the same element after it has been exported to native, this shows the MX model and string name now associated with this element.

Changing the MX model from DESIGN IMPORT to DESIGN IMPORT 2 in the Feature Definition Toggle Bar as below and re-exported that element to native will display a Failed to Persist message.

The Failed to Persist message appears due to the element already being linked to an MX model when it was originally exported to native.

How to Avoid

If you require the element to be exported to another MX model you can change the Model Name in the dropdown list of the Element information panel as below.

This will move the element to that model. the Export to Native function will now work as the Feature Definition Toggle Bar has been set to match the MX model linked with the OpenRoads Element.

Failed to Persist message when Exporting to Native

Failed to Persist message when Exporting to Native

Failed to Persist message when Exporting to Native

Failed to Persist message when Exporting to Native

How to Resolve

How to Resolve

See Also

Failed to Persist message when Exporting to Native

Error Message

Explanation 1 - MX Model Changed

How to Resolve

Explanation 2 - MX String Removed

How to Resolve

See Also

Failed to Persist message when Exporting to Native

Error Message

Explanation

How to Avoid

See Also

Failed to Persist message when Exporting to Native

Error Message

Explanation

How to Avoid

See Also