Plan & Profile Generator: First Sheet Does Not Honor Length

Jacquelyn Pettus — Thu, 28 May 2015 17:11:08 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 5/28/2015 5:11:08 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	Drafting

Problem:

The first sheet that is created in Plan & Profile Generator is too short. It does not use the Length that I defined on the Main Tab. All subsequent sheets are the correct length.

For example, my Start Station is 10+100 and my Length is set to 500. When I create the sheets, the first sheet is cut from 10+100 to 10+500 - a distance of only 400. The next sheet is from 10+500 to 11+000 - a distance of 500, which is correct.

Solution:

This is occurring as a result of the Station Lock being enabled. In the InRoads Explorer, go to Tools>Locks and toggle off "Station".

Plan & Profile Generator: First Sheet Does Not Honor Length

Jacquelyn Pettus — Thu, 28 May 2015 17:03:19 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 5/28/2015 5:03:19 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	Drafting

Problem:

The first sheet that is created in Plan & Profile Generator is too short. It does not use the Length that I defined on the Main Tab. All subsequent sheets are the correct length

Solution:

This is occurring as a result of the Station Lock being enabled. In the InRoads Explorer, go to Tools>Locks and toggle off "Station".