Why am I Pulling a License for Subsurface Utilities Design and Analysis (SUDA)?

Kevin McDonald — Mon, 29 Nov 2021 15:56:36 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 11/29/2021 3:56:36 PM

Product(s):	InRoads/MX/GEOPAK
Version(s):	08.11.09.845+
Area:	Subsurface Utilities

Question:

When I launch my civil product, why do I see that I have activated Subsurface Utilities Design and Analysis?

Additionally, I see that in my license log I have Product ID 2174 active.

Answer:

Product ID 2174 is the Subsurface Utilities Design and Analysis license. When installed, Subsurface Utilities Design and Analysis functionality loads when InRoads, GEOPAK, or MX starts. This product ID represents the 100 inlets level of StormCAD and is included at no additional fee with most OpenRoads packages.

It is possible that you might see Product ID 2174 listed multiple times. This is a known issue that, while it might be a bit confusing, does not affect your license fees.

Bentley Subsurface Utility Engineering (SUE) is a separate part of SUDA with Product ID 2335. It will appear only when you activate Bentley SUE from the tools menu. Note that the SUE Product ID is shown in addition to the StormCAD for OpenRoads ID.

If you activate one of the advanced hydraulic design products then you will see one of the following Product IDs alongside the 2174 ID. All of these are subject to additional license fees.

1246 – StormCAD Unlimited Inlets
1207 – CivilStorm
1243 – SewerCAD
1244 – SewerGEMS

Why am I Pulling a License for Subsurface Utilities Design and Analysis (SUDA)?

Kevin McDonald — Thu, 04 Aug 2016 14:59:21 GMT

Revision 10 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 8/4/2016 2:59:21 PM

Product(s):	InRoads/MX/GEOPAK
Version(s):	08.11.09.845+
Area:	Subsurface Utilities

Question:

When I launch my civil product, why do I see that I have activated Subsurface Utilities Design and Analysis?

Additionally, I see that in my license log I have Product ID 2174 active.

Answer:

Product ID 2174 is the Subsurface Utilities Design and Analysis license. When installed, Subsurface Utilities Design and Analysis functionality loads when OpenRoads starts. This product ID represents the 100 inlets level of StormCAD and is included at no additional fee with most OpenRoads packages.

It is possible that you might see Product ID 2174 listed multiple times. This is a known issue that, while it might be a bit confusing, does not affect your license fees.

If you activate one of the advanced hydraulic design products then you will see one of the following Product IDs alongside the 2174 ID. All of these are subject to additional license fees.

1246 – StormCAD Unlimited Inlets
1207 – CivilStorm
1243 – SewerCAD
1244 – SewerGEMS

Why am I Pulling a License for Subsurface Utilities Design and Analysis (SUDA)?

Jacquelyn Pettus — Thu, 20 Aug 2015 21:07:09 GMT

Revision 9 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 8/20/2015 9:07:09 PM

Product(s):	InRoads/MX/GEOPAK
Version(s):	08.11.09.845+
Area:	Subsurface Utilities

Question:

When I launch my civil product, why do I see that I have activated Subsurface Utilities Design and Analysis?

Additionally, I see that in my license log I have Product ID 2174 active.

Answer:

Product ID 2174 is the StormCAD for OpenRoads license, which is part of Bentley Subsurface Utility Design and Analysis. When installed, StormCAD for InRoads functionality loads when OpenRoads starts. This product ID represents the 100 inlets level of StormCAD and is included at no additional fee with most OpenRoads packages.

It is possible that you might see Product ID 2174 listed multiple times. This is a known issue that, while it might be a bit confusing, does not affect your license fees.

If you activate one of the advanced hydraulic design products then you will see one of the following Product IDs alongside the 2174 ID. All of these are subject to additional license fees.

1246 – StormCAD Unlimited Inlets
1207 – CivilStorm
1243 – SewerCAD
1244 – SewerGEMS

Why am I Pulling a License for Subsurface Utilities Design and Analysis (SUDA)?

Robert Garrett — Thu, 20 Aug 2015 17:03:40 GMT

Revision 8 posted to OpenRoads | OpenSite Wiki by Robert Garrett on 8/20/2015 5:03:40 PM

Product(s):	InRoads/MX/GEOPAK
Version(s):	08.11.09+
Area:	Subsurface Utilities

Question:

When I launch my civil product, why do I see that I have activated Subsurface Utilities Design and Analysis?

Additionally, I see that in my license log I have Product ID 2174 active.

Answer:

It is possible that you might see Product ID 2174 listed multiple times. This is a known issue that, while it might be a bit confusing, does not affect your license fees.

If you activate one of the advanced hydraulic design products then you will see one of the following Product IDs alongside the 2174 ID. All of these are subject to additional license fees.

1246 – StormCAD Unlimited Inlets
1207 – CivilStorm
1243 – SewerCAD
1244 – SewerGEMS

Why am I Pulling a License for Subsurface Utilities Design and Analysis (SUDA)?

Jacquelyn Pettus — Fri, 07 Aug 2015 18:25:58 GMT

Revision 7 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 8/7/2015 6:25:58 PM

Product(s):	InRoads/MX/GEOPAK
Version(s):	08.11.09+
Area:	Subsurface Utilities

Question:

When I launch my civil product, why do I see that I have activated Subsurface Utilities Design and Analysis?

Additionally, I see that in my license log I have Product ID 2174 active.

Answer:

Product ID 2174 is the StormCAD for OpenRoads license. When installed, Subsurface Utilities Design and Analysis (SUDA) with the StormCAD for InRoads functionality launches automatically when OpenRoads starts. This product ID represents the 100 inlets level of StormCAD and is included at no additional fee with most OpenRoads packages.

It is possible that you might see Product ID 2174 listed multiple times. This is a known issue that, while it might be a bit confusing, does not affect your license fees.

Bentley Subsurface Utility Engineering (SUE) is a separate product with Product ID 2335. It will appear only when you activate SUE from the tools menu. Note that the SUE Product ID is shown in addition to the StormCAD for OpenRoads ID.

If you activate one of the advanced hydraulic design products then you will see one of the following Product IDs alongside the 2174 ID. All of these are subject to additional license fees.

1246 – StormCAD Unlimited Inlets
1207 – CivilStorm
1243 – SewerCAD
1244 – SewerGEMS

Why am I Pulling a License for Subsurface Utilities Design and Analysis (SUDA)?

Jacquelyn Pettus — Fri, 07 Aug 2015 18:23:48 GMT

Revision 6 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 8/7/2015 6:23:48 PM

Product(s):	InRoads/MX/GEOPAK
Version(s):	08.11.09+
Area:	Subsurface Utilities

Question:

When I launch my civil product, why do I see that I have activated Subsurface Utilities Design and Analysis?

Additionally, I see that in my license log I have Product ID 2174 active.

Answer:

Product ID 2174 is the StormCAD for OpenRoads license. When installed, Subsurface Utilities Design and Analysis with the StormCAD for InRoads functionality launches automatically when OpenRoads starts. This product ID represents the 100 inlets level of StormCAD and is included at no additional fee with most OpenRoads packages.

It is possible that you might see Product ID 2174 listed multiple times. This is a known issue that, while it might be a bit confusing, does not affect your license fees.

Bentley Subsurface Utility Engineering is a separate product ID 2335. It will appear only when you activate Subsurface Utility Engineering from the tools menu. Note that the SUE Product ID is shown in addition to the StormCAD for OpenRoads ID.

If you activate one of the advanced hydraulic design products then you will see one of the following Product IDs alongside the 2174 ID. All of these are subject to additional license fees.

1246 – StormCAD Unlimited Inlets
1207 – CivilStorm
1243 – SewerCAD
1244 – SewerGEMS

Why am I Pulling a License for Product 2174 (StormCAD for OpenRoads)?

Jacquelyn Pettus — Fri, 07 Aug 2015 16:15:15 GMT

Revision 5 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 8/7/2015 4:15:15 PM

Product(s):	InRoads/MX/GEOPAK
Version(s):	08.11.09+
Area:	Subsurface Utilities

Question:

When I launch my civil product, why do I see Product ID 2174 active all the time in the license log?

Answer:

Product ID 2174 is the StormCAD for OpenRoads license and is activated automatically whenever the subsurface utilities option is installed with OpenRoads. StormCAD for OpenRoads starts up automatically when OpenRoads starts. This product ID represents the 100 inlets level of StormCAD and is included at no additional fee with most OpenRoads packages.

It is possible that you might see Product ID 2174 listed multiple times. This is a known issue but, while it might be a bit confusing, does not affect your license fees.

If you activate one of the advanced hydraulic design products then you will see one of the following Product IDs alongside the 2174 ID. All of these are subject to additional license fees.

1246 – StormCAD Unlimited Inlets
1207 – CivilStorm
1243 – SewerCAD
1244 – SewerGEMS

Why am I Pulling a License for Product 2174 (StormCAD for OpenRoads)?

Jacquelyn Pettus — Fri, 07 Aug 2015 16:12:39 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 8/7/2015 4:12:39 PM

Product(s):	InRoads/MX/GEOPAK
Version(s):	08.11.09+
Area:	Subsurface Utilities

Question:

When I launch my civil product, why do I see Product ID 2174 active all the time in the license log?

Answer:

It is possible that you might see Product ID 2174 listed multiple times. This is a known issue but, while it might be a bit confusing, does not affect your license fees.

If you activate one of the advanced hydraulic design products then you will see one of the following Product IDs alongside the 2174 ID. All of these are subject to additional license fees.

1246 – StormCAD Unlimited Inlets
1207 – CivilStorm
1243 – SewerCAD
1244 – SewerGEMS

Why am I Pulling a License for Product 2174 (StormCAD for OpenRoads)

Jacquelyn Pettus — Fri, 07 Aug 2015 15:51:14 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 8/7/2015 3:51:14 PM

Product(s):	InRoads/MX/GEOPAK
Version(s):	08.11.09+
Area:	Subsurface Utilities

Question:

When I launch my civil product, why do I see Product ID 2174 active all the time in the license log?

Answer:

It is possible that you might see Product ID 2174 listed multiple times. This is a known issue but, while it might be a bit confusing, does not affect your license fees.

If you activate one of the advanced hydraulic design products then you will see one of the following Product IDs alongside the 2174 ID. All of these are subject to additional license fees.

1246 – StormCAD Unlimited Inlets
1207 – CivilStorm
1243 – SewerCAD
1244 – SewerGEMS

Why am I Pulling a License for Product 2174 (StormCAD for OpenRoads)

Jacquelyn Pettus — Fri, 07 Aug 2015 15:50:04 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 8/7/2015 3:50:04 PM

Product(s):	InRoads/MX/GEOPAK
Version(s):	08.11.09+
Area:	Subsurface Utilities

Question:

When I launch my civil product, why do I see Product ID 2174 active all the time in the license log?

Answer:

It is possible that you might see Product ID 2174 listed multiple times. This is a known issue but, while it might be a bit confusing, does not affect your license fees.

Why am I pulling a License for Product 2174 (StormCAD for OpenRoads)

Jacquelyn Pettus — Fri, 07 Aug 2015 15:49:42 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 8/7/2015 3:49:42 PM

Product(s):	InRoads/MX/GEOPAK
Version(s):	08.11.09+
Area:	Subsurface Utilities

Question:

When I launch my civil product, why do I see Product ID 2174 active all the time in the license log?

Answer:

It is possible that you might see Product ID 2174 listed multiple times. This is a known issue but, while it might be a bit confusing, does not affect your license fees.