Define License Level (Number of Pipes) in Hydraulic Design Product(s)

Jonathan Smith — Thu, 28 Mar 2019 10:12:41 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jonathan Smith on 3/28/2019 10:12:41 AM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Subsurface Utilities

Question:

When I choose one of the advanced hydraulic design products (StormCAD Unlimited, CivilStorm, SewerCAD or SewerGEMS), how do I define the license level (number of pipes) that should be used?

Answer:

The answer to this question depends on which version of the Civil product you are using. V8i SELECTseries 4, and OpenRoads Designer versions prior to 10.06.00.38, use SELECTserver licensing.

OpenRoads Designer and OpenRail Designer 10.06.00.38 and above use CONNECT Licensing.

Please refer to the answers below for your version of the Civil product.

Answer - CONNECT Licensing:

https://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/39681/licensing-openflows-hydraulics-and-hydrology-products---connect-licensing

Answer 1 - SELECTserver licensing:

For an automated solution, it is possible to preconfigure these default levels of licensing in a more automated fashion. See the following article and scroll down to near the bottom.

communities.bentley.com/.../8317.performing-a-silent-installation-for-bentley-s-water-products

Answer 2 - SELECTserver licensing:

In the Subsurface folder under the product install directory, start the program named Haestad.LicenseAdministrator.Gui.exe.

For each of the advanced hydraulic products, highlight the license level to be used, then select "Make Default".

Define License Level (Number of Pipes) in Hydraulic Design Product(s)

Jonathan Smith — Thu, 28 Mar 2019 10:11:50 GMT

Revision 5 posted to OpenRoads | OpenSite Wiki by Jonathan Smith on 3/28/2019 10:11:50 AM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Subsurface Utilities

Question:

When I choose one of the advanced hydraulic design products (StormCAD Unlimited, CivilStorm, SewerCAD or SewerGEMS), how do I define the license level (number of pipes) that should be used?

Answer:

The answer to this question depends on which version of the Civil product you are using. V8i SELECTseries 4, and OpenRoads Designer versions prior to 10.06.00.38, use SELECTserver licensing.

OpenRoads Designer and OpenRail Designer 10.06.00.38 and above use CONNECT Licensing.

Please refer to the answers below for your version of the Civil product.

Answer - CONNECT Licensing:

https://communities.bentley.com/products/hydraulics___hydrology/w/hydraulics_and_hydrology__wiki/39681/licensing-openflows-hydraulics-and-hydrology-products---connect-licensing

Answer 1 - SELECTserver licensing:

For an automated solution, it is possible to preconfigure these default levels of licensing in a more automated fashion. See the following article and scroll down to near the bottom.

communities.bentley.com/.../8317.performing-a-silent-installation-for-bentley-s-water-products

Answer 2 - SELECTserver licensing:

In the Subsurface folder under the product install directory, start the program named Haestad.LicenseAdministrator.Gui.exe.

For each of the advanced hydraulic products, highlight the license level to be used, then select "Make Default".

Define License Level (Number of Pipes) in Hydraulic Design Product(s)

Jesse Dringoli — Mon, 12 Mar 2018 12:45:49 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by Jesse Dringoli on 3/12/2018 12:45:49 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Subsurface Utilities

Question:

When I choose one of the advanced hydraulic design products (StormCAD Unlimited, CivilStorm, SewerCAD or SewerGEMS), how do I define the license level (number of pipes) that should be used?

Answer 1:

For an automated solution, it is possible to preconfigure these default levels of licensing in a more automated fashion. See the following article and scroll down to near the bottom.

communities.bentley.com/.../8317.performing-a-silent-installation-for-bentley-s-water-products

Answer 2:

In the Subsurface folder under the OpenRoads product install directory, start the program named Haestad.LicenseAdministrator.Gui.exe.

For each of the advanced hydraulic products, highlight the license level to be used, then select "Make Default".

Define License Level (Number of Pipes) in Hydraulic Design Product(s)

Robert Garrett — Thu, 08 Oct 2015 12:05:39 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Robert Garrett on 10/8/2015 12:05:39 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Subsurface Utilities

Question:

When I choose one of the advanced hydraulic design products (StormCAD Unlimited, CivilStorm, SewerCAD or SewerGEMS), how do I define the license level (number of pipes) that should be used?

Answer 1:

For an automated solution, it is possible to preconfigure these default levels of licensing in a more automated fashion. See the following article and scroll down to near the bottom.

communities.bentley.com/.../8317.performing-a-silent-installation-for-bentley-s-water-products

Answer 2:

In the Subsurface folder under the OpenRoads product install directory, start the program named Haestad.LicenseAdministrator.Gui.exe.

For each of the advanced hydraulic products, highlight the license level to be used, then select "Make Default".

Define License Level (Number of Pipes) in Hydraulic Design Product(s)

Robert Garrett — Fri, 07 Aug 2015 17:52:28 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Robert Garrett on 8/7/2015 5:52:28 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Subsurface Utilities

Question:

When I choose one of the advanced hydraulic design products (StormCAD Unlimited, CivilStorm, SewerCAD or SewerGEMS), how do I define the license level (number of pipes) that should be used?

Answer 1:

Answer number 2 shows a "manual", per-user method of configuring the licensing levels. It is possible to preconfigure these default levels of licensing in a more automated fashion. See the following article and scroll down to near the bottom.

communities.bentley.com/.../8317.performing-a-silent-installation-for-bentley-s-water-products

Answer 2:

In the Subsurface folder under the OpenRoads product install directory, start the program named Haestad.LicenseAdministrator.Gui.exe.

For each of the advanced hydraulic products, highlight the license level to be used, then select "Make Default".

Define License Level (Number of Pipes) in Hydraulic Design Product(s)

Jacquelyn Pettus — Fri, 07 Aug 2015 15:59:52 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 8/7/2015 3:59:52 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Subsurface Utilities

Question:

When I choose one of the advanced hydraulic design products (StormCAD Unlimited, CivilStorm, SewerCAD or SewerGEMS), how do I define the license level (number of pipes) that should be used?

Answer:

In the Subsurface folder under the OpenRoads product install directory, start the program named Haestad.LicenseAdministrator.Gui.exe.

For each of the advanced hydraulic products, highlight the license level to be used, then select "Make Default".

Define License Level (Number of Pipes) in Hydraulic Design Product(s)

Define License Level (Number of Pipes) in Hydraulic Design Product(s)

See Also

Define License Level (Number of Pipes) in Hydraulic Design Product(s)

See Also

Define License Level (Number of Pipes) in Hydraulic Design Product(s)

See Also

Define License Level (Number of Pipes) in Hydraulic Design Product(s)

Define License Level (Number of Pipes) in Hydraulic Design Product(s)

Define License Level (Number of Pipes) in Hydraulic Design Product(s)