Extract Multiple Lines with Plan By 3D Element?

Jacquelyn Pettus — Mon, 17 Aug 2015 15:17:35 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 8/17/2015 3:17:35 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	3D Geometry

Question:

Is there a way to extract multiple lines with the Plan By 3D Element tool?

Answer:

Currently you can only extract one element at a time. However, If the elements are created from corridors, you can set the feature definition to "Create Template Geometry".

Note: A value of "True" for "Create Template Geometry" is not the recommend setting for all features. This should only be true for elements that will be used as a reference for geometry.

Extract Multiple Lines with Plan By 3D Element?

Jacquelyn Pettus — Mon, 17 Aug 2015 15:12:52 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 8/17/2015 3:12:52 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Civil Cells

Question:

Is there a way to extract multiple lines with the Plan By 3D Element tool?

Answer:

Currently you can only extract one element at a time. However, If the elements are created from corridors, you can set the feature definition to "Create Template Geometry".

Note: A value of "True" for "Create Template Geometry" is not the recommend setting for all features. This should only be true for elements that will be used as a reference for geometry.

Extract Multiple Line with Play By 3D Element?

Jacquelyn Pettus — Mon, 17 Aug 2015 14:44:21 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 8/17/2015 2:44:21 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Civil Cells

Question:

Currently you can only extract one element at a time. As an alternative, if the elements are created from corridors, you can set the feature definition to create template geometry. (It is not the recommend setting for all features. Only set this for elements that will be used as a reference for geometry.)