Link Conduits to Center of Inlet

Robert Garrett — Thu, 25 Feb 2016 12:24:55 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Robert Garrett on 2/25/2016 12:24:55 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09.845+
Area:	Subsurface Utilities

Question:

Can conduits link to the center of the inlet instead of the walls of the inlets?

Answer:

Yes, you will need to omit the connection regions when defining the cells. The connection regions are defined in the bottom cell and can be surface elements, shapes or solids defined as construction class and line style 6

Questions:

OK, but I ave configured my cells to connect at the face of the vault, which I want to happen. The problem is that they always connect to the center. What's wrong?

Answer:

Of course, the first action is to double check your feature definition library and cell libraries to confirm that the connection regions are properly configured and that the feature definitions are loading the cells that you think they are using.

But, then check you Accusnap settings. Make sure that the check box to "Identify Elements automatically" is ON .

Link Conduits to Center of Inlet

Jacquelyn Pettus — Tue, 15 Sep 2015 18:47:05 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 9/15/2015 6:47:05 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09.845+
Area:	Subsurface Utilities

Question:

Can conduits link to the center of the inlet instead of the walls of the inlets?

Answer:

Yes, you will need to omit the connection regions when defining the cells.

Link Conduits to Center of Inlet

Jacquelyn Pettus — Tue, 15 Sep 2015 18:46:38 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 9/15/2015 6:46:38 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09.845+
Area:	Subsurface Utilities

Question:

Can conduits link to the center of the inlet instead of the walls of the inlets

Answer:

Yes, you will need to omit the connection regions when defining the cells.