GEOPAK Survey Linking Codes

Beebe Ray — Tue, 22 Sep 2015 15:13:55 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Beebe Ray on 9/22/2015 3:13:55 PM


	Applies To

	Product(s):	Bentley GEOPAK Civil Engineering Suite
	Version(s):	08.11.07.615
	Environment:	N/A
	Area:	Survey
	Subarea:	Linking Codes
	Original Author:	Beebe Ray, Bentley Technical Support Group

PC - Point of Curvature, defines the beginning of a curve (the point of curvature for a curvilinear feature).

PT - Point of Tangency: defines the end of a curve (the point of tangency for a curvilinear feature).

You can not begin a line on a tangent curve. If a curve is either tangent (in) or tangent (out) you only need two points to define the curve.

CF - is for Curve Fit, the curve will not go through the points taken on the field but will do a best fit curve

They are for Eccentrics:

UD - means add or subtract value to the final elevation (+ means add to, - means subtract)

LR - means move point left or right by distance value (from instruments perspective ) (+ right, - left)

FB - means add subtract horizontal distance value (+ means add to, - means subtract)

Example:

UD*-2.00 means subtract 2 feet from the final elevation

LR*-2.5 means move point left 2.5 feet (perpendicular to the instrument-prism target line….from instrument perspective)

FB*2.0123 adds this amount to the final hz distance

Tags: survey, GEOPAK Survey SS2, Linking Codes, GEOPAK Survey Linking Codes

Beebe Ray — Tue, 22 Sep 2015 13:05:07 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Beebe Ray on 9/22/2015 1:05:07 PM


	Applies To

	Product(s):	Bentley GEOPAK Civil Engineering Suite
	Version(s):	08.11.07.615
	Environment:	N/A
	Area:	Survey
	Subarea:	Linking Codes
	Original Author:	Beebe Ray, Bentley Technical Support Group