Display Problems - Stray Lines or No Lines in DGN

Henk Ligtvoet — Wed, 07 Nov 2018 15:14:10 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Henk Ligtvoet on 11/7/2018 3:14:10 PM

Product(s):	InRoads, MX, GEOPAK, MicroStation
Version(s):	08.11.09+
Area:	Basic Settings

Problem:

If you experience problems with your graphics display, it is most likely caused by your computer hardware graphics card. See example screenshot below If you have Unstructured, Stray or NO lines are displayed.

In this case, the issue was caused by the NVIDIA Graphics Card Driver.

Solution:

Go to your Graphics Card manufacturer’s support webpage, download and install the latest version of Driver Software for your particular graphics card. Close down your Bentley produce and start it again.
Did this solve the problem? If not or if the latest version was already installed, continue to Step 2.
Change the computer Environment Variable to force MicroStation to use DirectX version 9 instead of DirectX 11 or 12.
1. Go to Control Panel\All Control Panel Items\System\Advanced System Settings.
2. Click on Environment Variables.
3. Under System Variables click on New.
4. Create a New System Variable
  
  For V8i:
  Variable name:                  QV_D3DVERSION
  Variable value:                  9
  Click OK
  
  For the CONNECT Edition:
  Variable name:                  QV_DISABLE_D3D11
  Variable value:                  1
  Click OK
5. Back in the Environment Variables dialog, click OK
6. Back in the System Properties dialog, click Apply then OK.
7. Restart your Bentley product. The issue should now be resolved.

Tags: Display, graphics, zigzag lines, zingers, spiderweb

Display Problems - Stray Lines or No Lines in DGN

Henk Ligtvoet — Wed, 07 Nov 2018 15:13:38 GMT

Revision 6 posted to OpenRoads | OpenSite Wiki by Henk Ligtvoet on 11/7/2018 3:13:38 PM

Product(s):	InRoads, MX, GEOPAK, MicroStation
Version(s):	08.11.09+
Area:	Basic Settings

Problem:

In this case, the issue was caused by the NVIDIA Graphics Card Driver.

Solution:

Go to your Graphics Card manufacturer’s support webpage, download and install the latest version of Driver Software for your particular graphics card. Close down your Bentley produce and start it again.
Did this solve the problem? If not or if the latest version was already installed, continue to Step 2.
Change the computer Environment Variable to force MicroStation to use DirectX version 9 instead of DirectX 11 or 12.
1. Go to Control Panel\All Control Panel Items\System\Advanced System Settings.
2. Click on Environment Variables.
3. Under System Variables click on New.
4. Create a New System Variable
  
  For V8i:
  Variable name:                  QV_D3DVERSION
  Variable value:                  9
  Click OK
  
  For the CONNECT Edition:
  Variable name:                  QV_DISABLE_D3D11
  Variable value:                  1
  Click OK
5. Back in the Environment Variables dialog, click OK
6. Back in the System Properties dialog, click Apply then OK.
7. Restart your Bentley product. The issue should now be resolved.

Tags: Display, graphics, spiderweb

Display Problems - Stray Lines or No Lines in DGN

Todd Moser — Fri, 05 May 2017 19:03:37 GMT

Revision 5 posted to OpenRoads | OpenSite Wiki by Todd Moser on 5/5/2017 7:03:37 PM

Product(s):	InRoads, MX, GEOPAK, MicroStation
Version(s):	08.11.09+
Area:	Basic Settings

Problem:

In this case, the issue was caused by the NVIDIA Graphics Card Driver.

Solution:

Go to your Graphics Card manufacturer’s support webpage, download and install the latest version of Driver Software for your particular graphics card. Close down your Bentley produce and start it again. Did this solve the problem? If not or if the latest version was already installed, continue to Step 2.
Change the computer Environment Variable to force MicroStation to use DirectX version 9 instead of DirectX 11 or 12.
1. Go to Control Panel\All Control Panel Items\System\Advanced System Settings.
2. Click on Environment Variables.
3. Under System Variables click on New.
4. Create a New System Variable
  
  Variable name: QV_D3DVERSION
  Variable value: 9
  Click OK
5. Back in the Environment Variables dialog, click OK
6. Back in the System Properties dialog, click Apply then OK.
7. Restart your Bentley product. The issue should now be resolved.

Tags: Display, graphics, spiderweb

Display Problems - Stray Lines in DGN

Beebe Ray — Thu, 30 Mar 2017 13:19:03 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by Beebe Ray on 3/30/2017 1:19:03 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Basic Settings

Problem:

If you experience problems with your graphics display, it is most likely caused by your computer hardware graphics card. See example screenshot below - notice all the unstructured and stray lines in the display.

In this case, the issue was caused by the NVIDIA Graphics Card Driver.

Solution:

Go to your Graphics Card manufacturer’s support webpage, download and install the latest version of Driver Software for your particular graphics card. Close down your Bentley produce and start it again. Did this solve the problem? If not or if the latest version was already installed, continue to Step 2.
Change the computer Environment Variable to force MicroStation to use DirectX version 9.
1. Go to Control Panel\All Control Panel Items\System\Advanced System Settings.
2. Click on Environment Variables.
3. Under System Variables click on New.
4. Create a New System Variable
  
  Variable name: QV_D3DVERSION
  Variable value: 9
  Click OK
5. Back in the Environment Variables dialog, click OK
6. Back in the System Properties dialog, click Apply then OK.
7. Restart your Bentley product. The issue should now be resolved.

Tags: spiderweb

Display Problems - Stray Lines in DGN

Jacquelyn Pettus — Fri, 22 Jan 2016 16:39:32 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 1/22/2016 4:39:32 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Basic Settings

Problem:

In this case, the issue was caused by the NVIDIA Graphics Card Driver.

Solution:

Go to your Graphics Card manufacturer’s support webpage, download and install the latest version of Driver Software for your particular graphics card. Close down your Bentley produce and start it again. Did this solve the problem? If not or if the latest version was already installed, continue to Step 2.
Change the computer Environment Variable to force MicroStation to use DirectX version 9.
1. Go to Control Panel\All Control Panel Items\System\Advanced System Settings.
2. Click on Environment Variables.
3. Under System Variables click on New.
4. Create a New System Variable
  
  Variable name: QV_D3DVERSION
  Variable value: 9
  Click OK
5. Back in the Environment Variables dialog, click OK
6. Back in the System Properties dialog, click Apply then OK.
7. Restart your Bentley product. The issue should now be resolved.

Display Problems - Stray Lines in DGN

Jacquelyn Pettus — Thu, 21 Jan 2016 22:24:40 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 1/21/2016 10:24:40 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Basic Settings

Overview:

If you experience problems with your Graphics Display, it is most likely caused by your computer hardware graphics card. See example screenshot below - notice all the unstructured and confused lines in the display.

In this case, the issue was caused by the NVIDIA Graphics Card Driver.

Solution:

Go to your Graphics Card manufacturer’s support webpage, download and install the latest version of Driver Software for your particular graphics card. Close down your Bentley produce and start it again. Did this solve the problem? If not or if the latest version was already installed, continue to Step 2.
Change the computer Environment Variable to force MicroStation to use DirectX version 9.
1. Go to Control Panel\All Control Panel Items\System\Advanced System Settings.
2. Click on Environment Variables.
3. Under System Variables click on New.
4. Create a New System Variable
  
  Variable name: QV_D3DVERSION
  Variable value: 9
  Click OK
5. Back in the Environment Variables dialog, click OK
6. Back in the System Properties dialog, click Apply then OK.
7. Restart your Bentley product. The issue should now be resolved.

Display Problems - Strange Lines in DGN

Jacquelyn Pettus — Thu, 14 Jan 2016 15:29:52 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 1/14/2016 3:29:52 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Basic Settings

Overview:

In this case, the issue was caused by the NVIDIA Graphics Card Driver.

Solution:

Go to your Graphics Card manufacturer’s support webpage, download and install the latest version of Driver Software for your particular graphics card. Close down your Bentley produce and start it again. Did this solve the problem? If not or if the latest version was already installed, continue to Step 2.
Change the computer Environment Variable to force MicroStation to use DirectX version 9.
1. Go to Control Panel\All Control Panel Items\System\Advanced System Settings.
2. Click on Environment Variables.
3. Under System Variables click on New.
4. Create a New System Variable
  
  Variable name: QV_D3DVERSION
  Variable value: 9
  Click OK
5. Back in the Environment Variables dialog, click OK
6. Back in the System Properties dialog, click Apply then OK.
7. Restart your Bentley product. The issue should now be resolved.