Video: Reason and solution for element not valid for Tool error & Create Civil Rule Feature

Purva Lakde — Thu, 10 Nov 2016 12:00:02 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Purva Lakde on 11/10/2016 12:00:02 PM

Applies To

	Product(s):	Open Roads Technology
	Version(s):	08.11.09+
	Environment:	N/A
	Area:	Open Roads Technology
	Subarea:	Create Civil Rule Feature
	Original Author:	Purva Lakde. Product Advantage Group

Create Civil Rule Feature tool to assign Civil Geometry rules to elements created by tools other than civil geometry tools of Open Roads Technology.

"Element Not Valid for Tool" Error:

MicroStation lines can become Civil Geometry ruled elements complete with manipulators and all the editing capabilities that derive therefrom.

Workflow:

1. The element must be in a 2D design model to be able to convert it to a Civil Rule Feature.

2. Draw a MicroStation simple Line as a example.

3. Open the Civil Tools task pane to the General Geometry section then click the Create Civil Rule Feature icon.

4. Select the graphic element to which you wish to assign rules and right-click to reset to close the selection set.

5.The selected element now has been assigned civil rules and you can select a manipulator to edit.

Tags: convert, Create Civil Rule Feature, error, 2d design, Element Not Valid for Tool, civil rule

Purva Lakde — Thu, 10 Nov 2016 11:59:15 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Purva Lakde on 11/10/2016 11:59:15 AM

Applies To

	Product(s):	Open Roads Technology
	Version(s):	08.11.09+
	Environment:	N/A
	Area:	Open Roads Technology
	Subarea:	Create Civil Rule Feature
	Original Author:	Purva Lakde. Product Advantage Group

Create Civil Rule Feature tool to assign Civil Geometry rules to elements created by tools other than civil geometry tools of Open Roads Technology.

"Element Not Valid for Tool" Error:

MicroStation lines can become Civil Geometry ruled elements complete with manipulators and all the editing capabilities that derive therefrom.

Workflow:

1. The element must be in a 2D design model to be able to convert it to a Civil Rule Feature.

2. Draw a MicroStation simple Line as a example.

3. Open the Civil Tools task pane to the General Geometry section then click the Create Civil Rule Feature icon.

4. Select the graphic element to which you wish to assign rules and right-click to reset to close the selection set.

5.The selected element now has been assigned civil rules and you can select a manipulator to edit.

Tags: convert, Create Civil Rule Feature, error, 2d design, Element Not Valid for Tool, civil rule

Purva Lakde — Thu, 10 Nov 2016 11:41:56 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Purva Lakde on 11/10/2016 11:41:56 AM

Applies To

	Product(s):	Open Roads Technology
	Version(s):	08.11.09+
	Environment:	N/A
	Area:	Open Roads Technology
	Subarea:	Create Civil Rule Feature
	Original Author:	Purva Lakde. Product Advantage Group

Create Civil Rule Feature tool to assign Civil Geometry rules to elements created by tools other than civil geometry tools of Open Roads Technology.

"Element Not Valid for Tool" Error:

MicroStation lines can become Civil Geometry ruled elements complete with manipulators and all the editing capabilities that derive therefrom.

Workflow:

1. The element must be in a 2D design model to be able to convert it to a Civil Rule Feature.

2. Draw a MicroStation simple Line as a example.

3. Open the Civil Tools task pane to the General Geometry section then click the Create Civil Rule Feature icon.

4. Select the graphic element to which you wish to assign rules and right-click to reset to close the selection set.

5.The selected element now has been assigned civil rules and you can select a manipulator to edit.

Tags: convert, Create Civil Rule Feature, error, 2d design, Element Not Valid for Tool, civil rule