You are currently reviewing an older revision of this page.
When launching InRoads or GEOPAK in ProjectWise V10.00.02.265 using a managed workspace, user gets the error "Last Error  Cannot start application for the specified document. Check your program association. Failed to generate managed workspace configuration file. can't open macro file [C:\Program Files (x86)\Common Files/Bentley Shared/Civil Platform/08.11.09/Bentley Civil Assembly Location MS - Required.2.0.cfg],[C:\Program Files (x86)\Bentley\MicroStation V8i (SELECTseries)\MicroStation\config\appl\geopak.3.1.cfg, line 24"
This error is caused because ProjectWise CONNECT V10.00.02.265 is resolving the variable "$(CommonProgramFiles)" to the C:\Program Files\Common Files folder (since it is a 64 application) instead of the C:\Program Files (x86)\Common Files which is required by the 32 bit InRoads and GEOPAK SS4 products.
To resolve the problem the user can either
1.) Edit the geopak.3.1.cfg or inroads.3.1.cfg file and add "CommonProgramFiles=C:\Program Files (x86)\Common Files\" to the top of the fileor 2.) Add a new Managed workspace variable at the Predefined or Global level that sets "CommonProgramFiles=C:\Program Files (x86)\Common Files\". This Managed Workspace variable could then be added to the InRoads/GEOPAK application, or to any files/folders that will use InRoads/GEOPAK.