You are currently reviewing an older revision of this page.
Question:
When launching InRoads or GEOPAK in ProjectWise V10.00.02.265 using a managed workspace, user gets the error "Last Error [222] Cannot start application for the specified document. Check your program association. Failed to generate managed workspace configuration file. can't open macro file [C:\Program Files (x86)\Common Files/Bentley Shared/Civil Platform/08.11.09/Bentley Civil Assembly Location MS - Required.2.0.cfg],[C:\Program Files (x86)\Bentley\MicroStation V8i (SELECTseries)\MicroStation\config\appl\geopak.3.1.cfg, line 24"
Answer:
This error is caused because ProjectWise CONNECT V10.00.02.265 is resolving the variable "$(CommonProgramFiles)" to the C:\Program Files\Common Files folder (since it is a 64 application) instead of the C:\Program Files (x86)\Common Files which is required by the 32 bit InRoads and GEOPAK SS4 products.
To resolve the problem the user can either
1.) For GEOPAK: edit the geopak.3.1.cfg file and add "CommonProgramFiles=C:\Program Files (x86)\Common Files\" to the top of the file
For InRoads: edit the inroads.3.1.cfg file and add "CommonProgramFiles=C:\Program Files (x86)\Common Files\" and on another line "InRoads_Path=C:\Program Files (x86)\Bentley\InRoads Group (SELECTseries 4)\" to the top of the file
or
2.) Add a new Managed workspace variable at the Predefined or Global level that sets "CommonProgramFiles=C:\Program Files (x86)\Common Files\" and if using InRoads, this: "InRoads_Path=C:\Program Files (x86)\Bentley\InRoads Group (SELECTseries 4)\". This Managed Workspace variable could then be added to the InRoads/GEOPAK application, or to any files/folders that will use InRoads/GEOPAK.