Roadway Designer Template Transition

Sanders Thomas — Wed, 29 Mar 2017 17:37:52 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Sanders Thomas on 3/29/2017 5:37:52 PM


	Applies To

	Product(s):	InRoads
	Version(s):	V08.09+
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Roadway Designer Template Transition

This workflow will walk through a generic template transition. Keep in mind that two templates must be dropped in the same corridor to run this workflow.

The first step is to complete the connection between the points from template one to template two. (This will show the Roadway Designer how to connect the points from one template to the next. If the two templates have the same point names in both templates, this portion will be completed automatically and show a dark blue rectangle.) This can be done by double clicking on the rectangular shape in the Roadway Designer’s Plan View or right clicking on the shape and selecting “Edit”.

Figure 1. Plan View – Before transition

Once the Edit Transition dialog populates, the connection will need to be completed for all the points. These points that require user adjustments will be displayed with a bold plus sign. (If this process is not completed, there is a high possibility that some of the points/components will not be created within the surface.)

Figure 2. Edit Transition – Before edits

If it is hard to view the two templates, the view can be moved by right clicking on a point and selecting “Move Template”.

Figure 3. Edit Transition – “Move Template”

After all the points have been connected from one template to the next, select “OK”. (There should be no remaining bold plus signs displaying)

Figure 4. Edit Transition – After edits

3. At this time, the Edit Transition Midpoint dialog should appear.

Figure 5. Edit Transition Midpoint – Before edits

In this dialog, some of the point constraints must be “released” from the template points so the template can transition properly. This can be accomplished by right clicking on the point that will be moving/transitioning and selecting the constraint that needs to be released.

Figure 6. Edit Transition Midpoint – release/delete constraints

There is a scrollbar at the bottom of the dialog that will show how the template will transition from one template to the next over the station range specified. When the correct constraints have been released, the transition can take place. Check the transition with the scrollbar to verify that the transition looks/appears correctly.

Figure 7. Edit Transition Midpoint – Use of Scrollbar

Once the template appears to transition correctly in the Edit Transition Midpoint dialog, select "OK". At this time, the transition has been addressed correctly/completely and it will be applied to the Roadway Designer.

Figure 8. Plan View – After transition is complete

The transition is shown to be "addressed" with a dark blue rectangle in the plan view of the Roadway Designer.

External Links

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: InRoads, SELECTservices, TechNote, TechNotes, Bentley InRoads

Roadway Designer Template Transition

Elisabeth Pry — Fri, 21 Jun 2013 17:42:33 GMT

Revision 6 posted to OpenRoads | OpenSite Wiki by Elisabeth Pry on 6/21/2013 5:42:33 PM


	Applies To

	Product(s):	InRoads
	Version(s):	V08.09+
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Roadway Designer Template Transition

This workflow will walk through a generic template transition. Keep in mind that two templates must be dropped in the same corridor to run this workflow.

The first step is to complete the connection between the points from template one to template two. (This will show the Roadway Designer how to connect the points from one template to the next. If the two templates have the same point names, this portion will be completed automatically and show a dark blue rectangle.) This can be done by double clicking on the rectangular shape in the Roadway Designer’s Plan View or right clicking on the shape and selecting “Edit”.

Figure 1. Plan View – Before transition

Figure 2. Edit Transition – Before edits

If it is hard to view the two templates, the view can be moved by right clicking on a point and selecting “Move Template”.

Figure 3. Edit Transition – “Move Template”

After all the points have been connected from one template to the next, select “OK”. (There should be no remaining bold plus signs displaying)

Figure 4. Edit Transition – After edits

3. At this time, the Edit Transition Midpoint dialog should appear.

Figure 5. Edit Transition Midpoint – Before edits

Figure 6. Edit Transition Midpoint – release/delete constraints

Figure 7. Edit Transition Midpoint – Use of Scrollbar

Figure 8. Plan View – After transition is complete

The transition is shown to be "addressed" with a dark blue rectangle in the plan view of the Roadway Designer.

External Links

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: InRoads, SELECTservices, TechNote, TechNotes, Bentley InRoads

Roadway Designer Template Transition

Jacquelyn Pettus — Tue, 06 Nov 2012 20:24:23 GMT

Revision 5 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 11/6/2012 8:24:23 PM

Document Information

Document Type: TechNote

Product(s): InRoads

Version(s): V08.09+

Original Author: Bentley Technical Support Group

Roadway Designer Template Transition

This workflow will walk through a generic template transition. Keep in mind that two templates must be dropped in the same corridor to run this workflow.

The first step is to complete the connection between the points from template one to template two. (This will show the Roadway Designer how to connect the points from one template to the next. If the two templates have the same point names, this portion will be completed automatically and show a dark blue rectangle.) This can be done by double clicking on the rectangular shape in the Roadway Designer’s Plan View or right clicking on the shape and selecting “Edit”.

Figure 1. Plan View – Before transition

Figure 2. Edit Transition – Before edits

If it is hard to view the two templates, the view can be moved by right clicking on a point and selecting “Move Template”.

Figure 3. Edit Transition – “Move Template”

After all the points have been connected from one template to the next, select “OK”. (There should be no remaining bold plus signs displaying)

Figure 4. Edit Transition – After edits

3. At this time, the Edit Transition Midpoint dialog should appear.

Figure 5. Edit Transition Midpoint – Before edits

Figure 6. Edit Transition Midpoint – release/delete constraints

Figure 7. Edit Transition Midpoint – Use of Scrollbar

Figure 8. Plan View – After transition is complete

The transition is shown to be "addressed" with a dark blue rectangle in the plan view of the Roadway Designer.

External Links

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Bentley InRoads, InRoads, TechNote, TechNotes

Roadway Designer Template Transition

InRoads Technical Support Team — Thu, 27 Sep 2012 21:03:10 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by InRoads Technical Support Team on 9/27/2012 9:03:10 PM

Document Information

Document Type: TechNote

Product(s): InRoads

Version(s): V08.09+

Original Author: Bentley Technical Support Group

Roadway Designer Template Transition

This workflow will walk through a generic template transition. Keep in mind that two templates must be dropped in the same corridor to run this workflow.

The first step is to complete the connection between the points from template one to template two. (This will show the Roadway Designer how to connect the points from one template to the next. If the two templates have the same point names, this portion will be completed automatically and show a dark blue rectangle.) This can be done by double clicking on the rectangular shape in the Roadway Designer’s Plan View or right clicking on the shape and selecting “Edit”.

Figure 1. Plan View – Before transition

Figure 2. Edit Transition – Before edits

If it is hard to view the two templates, the view can be moved by right clicking on a point and selecting “Move Template”.

Figure 3. Edit Transition – “Move Template”

After all the points have been connected from one template to the next, select “OK”. (There should be no remaining bold plus signs displaying)

Figure 4. Edit Transition – After edits

3. At this time, the Edit Transition Midpoint dialog should appear.

Figure 5. Edit Transition Midpoint – Before edits

Figure 6. Edit Transition Midpoint – release/delete constraints

Figure 7. Edit Transition Midpoint – Use of Scrollbar

Figure 8. Plan View – After transition is complete

The transition is shown to be "addressed" with a dark blue rectangle in the plan view of the Roadway Designer.

External Links

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Bentley InRoads, InRoads, TechNote, TechNotes

Roadway Designer Template Transition

Andrea Garecht — Tue, 30 Nov 2010 17:37:50 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Andrea Garecht on 11/30/2010 5:37:50 PM

Document Information

Document Type: TechNote

Product(s): InRoads

Version(s): V08.09+

Original Author: Bentley Technical Support Group

Roadway Designer Template Transition

This workflow will walk through a generic template transition. Keep in mind that two templates must be dropped in the same corridor to run this workflow.

The first step is to complete the connection between the points from template one to template two. (This will show the Roadway Designer how to connect the points from one template to the next. If the two templates have the same point names, this portion will be completed automatically and show a dark blue rectangle.) This can be done by double clicking on the rectangular shape in the Roadway Designer’s Plan View or right clicking on the shape and selecting “Edit”.

Figure 1. Plan View – Before transition

Figure 2. Edit Transition – Before edits

If it is hard to view the two templates, the view can be moved by right clicking on a point and selecting “Move Template”.

Figure 3. Edit Transition – “Move Template”

After all the points have been connected from one template to the next, select “OK”. (There should be no remaining bold plus signs displaying)

Figure 4. Edit Transition – After edits

3. At this time, the Edit Transition Midpoint dialog should appear.

Figure 5. Edit Transition Midpoint – Before edits

Figure 6. Edit Transition Midpoint – release/delete constraints

Figure 7. Edit Transition Midpoint – Use of Scrollbar

Figure 8. Plan View – After transition is complete

The transition is shown to be "addressed" with a dark blue rectangle in the plan view of the Roadway Designer.

External Links

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Tags: Bentley InRoads, InRoads, TechNote, TechNotes

Roadway Designer Template Transition

Andrea Garecht — Tue, 30 Nov 2010 17:34:54 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Andrea Garecht on 11/30/2010 5:34:54 PM

Document Information

Document Type: TechNote

Product(s): InRoads

Version(s): V08.09+

Original Author: Bentley Technical Support Group

Roadway Designer Template Transition

This workflow will walk through a generic template transition. Keep in mind that two templates must be dropped in the same corridor to run this workflow.

The first step is to complete the connection between the points from template one to template two. (This will show the Roadway Designer how to connect the points from one template to the next. If the two templates have the same point names, this portion will be completed automatically and show a dark blue rectangle.) This can be done by double clicking on the rectangular shape in the Roadway Designer’s Plan View or right clicking on the shape and selecting “Edit”.

Figure 1. Plan View – Before transition

Figure 2. Edit Transition – Before edits

If it is hard to view the two templates, the view can be moved by right clicking on a point and selecting “Move Template”.

Figure 3. Edit Transition – “Move Template”

After all the points have been connected from one template to the next, select “OK”. (There should be no remaining bold plus signs displaying)

Figure 4. Edit Transition – After edits

3. At this time, the Edit Transition Midpoint dialog should appear.

Figure 5. Edit Transition Midpoint – Before edits

Figure 6. Edit Transition Midpoint – release/delete constraints

Figure 7. Edit Transition Midpoint – Use of Scrollbar

Figure 8. Plan View – After transition is complete

The transition is shown to be "addressed" with a dark blue rectangle in the plan view of the Roadway Designer.

External Links

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Roadway Designer Template Transition

Andrea Garecht — Tue, 30 Nov 2010 17:29:32 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Andrea Garecht on 11/30/2010 5:29:32 PM

Document Information

Document Type: TechNote

Product(s): InRoads

Version(s): V08.09+

Original Author: Bentley Technical Support Group

Roadway Designer Template Transition

This workflow will walk through a generic template transition. Keep in mind that two templates must be dropped in the same corridor to run this workflow.

The first step is to complete the connection between the points from template one to template two. (This will show the Roadway Designer how to connect the points from one template to the next. If the two templates have the same point names, this portion will be completed automatically and show a dark blue rectangle.) This can be done by double clicking on the rectangular shape in the Roadway Designer’s Plan View or right clicking on the shape and selecting “Edit”.

Figure 1. Plan View – Before transition

Once the Edit Transition dialog populates, the connection will need to be completed for all the points. These points will be displayed with a bold plus sign. (If this process is not completed, there is a high possibility that some of the points/components will not be created with the surface.)

Figure 2. Edit Transition – Before edits

If it is hard to view the two templates, the view can be moved by right clicking on a point and selecting “Move Template”.

Figure 3. Edit Transition – “Move Template”

After this is completed, select “OK”.

Figure 4. Edit Transition – After edits

3. At this time, the Edit Transition Midpoint dialog should appear.

Figure 5. Edit Transition Midpoint – Before edits

Figure 6. Edit Transition Midpoint – release/delete constraints

Figure 7. Edit Transition Midpoint – Use of Scrollbar

At this time, the transition has been addressed correctly/completely and when the “OK” button is selected it will be applied to the Roadway Designer.

Figure 8. Plan View – After transition is complete

External Links

Bentley Technical Support KnowledgeBase

Bentley LEARN Server

Comments or Corrections?

Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!

Roadway Designer Template Transition

Roadway Designer Template Transition

Roadway Designer Template Transition

This workflow will walk through a generic template transition. Keep in mind that two templates must be dropped in the same corridor to run this workflow.

See Also

External Links

Comments or Corrections?

Roadway Designer Template Transition

Roadway Designer Template Transition

This workflow will walk through a generic template transition. Keep in mind that two templates must be dropped in the same corridor to run this workflow.

See Also

External Links

Comments or Corrections?

Roadway Designer Template Transition

Document Information

Roadway Designer Template Transition

This workflow will walk through a generic template transition. Keep in mind that two templates must be dropped in the same corridor to run this workflow.

See Also

External Links

Comments or Corrections?

Roadway Designer Template Transition

Document Information

Roadway Designer Template Transition

This workflow will walk through a generic template transition. Keep in mind that two templates must be dropped in the same corridor to run this workflow.

See Also

External Links

Comments or Corrections?

Roadway Designer Template Transition

Document Information

Roadway Designer Template Transition

This workflow will walk through a generic template transition. Keep in mind that two templates must be dropped in the same corridor to run this workflow.

See Also

External Links

Comments or Corrections?

Roadway Designer Template Transition

Document Information

Roadway Designer Template Transition

This workflow will walk through a generic template transition. Keep in mind that two templates must be dropped in the same corridor to run this workflow.

See Also

External Links

Comments or Corrections?

Roadway Designer Template Transition

Document Information

Roadway Designer Template Transition

This workflow will walk through a generic template transition. Keep in mind that two templates must be dropped in the same corridor to run this workflow.

See Also

External Links

Comments or Corrections?