Best Practices for Creating a Civil iModel

Kevin McDonald — Mon, 21 Aug 2023 13:32:06 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 8/21/2023 1:32:06 PM

Product(s):	OpenRoads Designer
Version(s):	10.10.21+
Area:	General

Question:

How do I prepare my OpenRoads data to be published to an iModel?

Answer:

Create a 2D container file with OpenRoads Designer.
- This container file needs to be created from the correct seed file in the Workspace used by the dataset.
- The container file needs to have the correct GCS for the project.
Attach all needed/required reference files.
- If the reference file has a default (2D) and default-3D model, attach the default (2D) model only.
- If the file has only a 2D model(s), attach each desired model as-is.
- If the file has only a 3D model(s), attach each desired model as-is.
Create a Civil model in the container file that results in the creation of a default-3D
- e.g. Make terrain active
Review the hierarchy of the reference files. Be sure that ALL required files\models are listed.
- Ensure the Reference Display = ON for each reference attachment you want to show in the iModel.
- Set the 3D-Default model within the “container” file to a minimum nesting depth of 1.

Current Limitations:

Limitations: Terrains

All terrains less than 7 million points will go directly into the iModel.
Terrains greater than 7 million points require the use of a Context Data Share which would have to be setup for the project.
Be aware that large terrains can greatly increase processing times.

Limitations: Subsurface

Drainage & Utilities data that is shown in the Civil properties will be included
The iTwin Synchronizer will also include properties from the Drainage & Utilities databases

Limitations: OpenSite

Currently, OpenSite properties will not be included in the iModel.

Video:

www.youtube.com/watch

Tags: imodel, i-Model, iTwin, iTwin Synchronizer

Best Practices for Creating a Civil iModel

Kevin McDonald — Mon, 21 Aug 2023 13:31:01 GMT

Revision 12 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 8/21/2023 1:31:01 PM

Product(s):	OpenRoads Designer
Version(s):	10.08+
Area:	General

Question:

How do I prepare my OpenRoads data to be published to an iModel?

Answer:

Create a 2D container file with OpenRoads Designer.
- This container file needs to be created from the correct seed file in the Workspace used by the dataset.
- The container file needs to have the correct GCS for the project.
Attach all needed/required reference files.
- If the reference file has a default (2D) and default-3D model, attach the default (2D) model only.
- If the file has only a 2D model(s), attach each desired model as-is.
- If the file has only a 3D model(s), attach each desired model as-is.
Create a Civil model in the container file that results in the creation of a default-3D
- e.g. Make terrain active
Review the hierarchy of the reference files. Be sure that ALL required files\models are listed.
- Ensure the Reference Display = ON for each reference attachment you want to show in the iModel.
- Set the 3D-Default model within the “container” file to a minimum nesting depth of 1.

Current Limitations:

Limitations: Terrains

All terrains less than 7 million points will go directly into the iModel.
Terrains greater than 7 million points require the use of a Context Data Share which would have to be setup for the project.
Be aware that large terrains can greatly increase processing times.

Limitations: Subsurface

Drainage & Utilities data that is shown in the Civil properties will be included
The iTwin Synchronizer will also include properties from the Drainage & Utilities databases

Limitations: OpenSite

Currently, OpenSite properties will not be included in the iModel.

Video:

www.youtube.com/watch

Tags: imodel, i-Model, iTwin, iTwin Synchronizer

Best Practices for Creating a Civil iModel

Kevin McDonald — Mon, 13 Mar 2023 14:03:14 GMT

Revision 11 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 3/13/2023 2:03:14 PM

Product(s):	OpenRoads Designer
Version(s):	10.08+
Area:	General

Question:

How do I prepare my OpenRoads data to be published to an iModel?

Answer:

Create a 2D container file with OpenRoads Designer.
- This container file needs to be created from the correct seed file in the Workspace used by the dataset.
- The container file needs to have the correct GCS for the project.
Attach all needed/required reference files.
- If the reference file has a default (2D) and default-3D model, attach the default (2D) model only.
- If the file has only a 2D model(s), attach each desired model as-is.
- If the file has only a 3D model(s), attach each desired model as-is.
Create a Civil model in the container file that results in the creation of a default-3D
- e.g. Make terrain active
Review the hierarchy of the reference files. Be sure that ALL required files\models are listed.
- Ensure the Reference Display = ON for each reference attachment you want to show in the iModel.
- Set the 3D-Default model within the “container” file to a minimum nesting depth of 1.

Current Limitations:

Limitations: Terrains

All terrains less than 7 million points will go directly into the iModel.
Terrains greater than 7 million points require the use of a Context Data Share which would have to be setup for the project.
Be aware that large terrains can greatly increase processing times.

Limitations: Subsurface

If your references contain Drainage & Utilities data, the main container file must have a subsurface project created.
- e.g. Place a node
Results properties (such as Velocity/Depth/Spread) will only be published from iTwin Synchronizer.

Limitations: OpenSite

Currently, OpenSite properties will not be included in the iModel.

Video:

www.youtube.com/watch

Tags: imodel, i-Model, iTwin, iTwin Synchronizer

Best Practices for Creating a Civil iModel

Kevin McDonald — Wed, 24 Feb 2021 20:50:06 GMT

Revision 10 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 2/24/2021 8:50:06 PM

Product(s):	OpenRoads Designer
Version(s):	10.08+
Area:	General

Question:

How do I prepare my OpenRoads data to be published to an iModel?

Answer:

Create a 2D container file with OpenRoads Designer.
- This container file needs to be created from the correct seed file in the Workspace used by the dataset.
- The container file needs to have the correct GCS for the project.
Attach all needed/required reference files.
- If the reference file has a default (2D) and default-3D model, attach the default (2D) model only.
- If the file has only a 2D model(s), attach each desired model as-is.
- If the file has only a 3D model(s), attach each desired model as-is.
Create a Civil model in the container file that results in the creation of a default-3D
- e.g. Make terrain active
Review the hierarchy of the reference files. Be sure that ALL required files\models are listed.
- Ensure the Reference Display = ON for each reference attachment you want to show in the iModel.
- Set the 3D-Default model within the “container” file to a minimum nesting depth of 1.

Current Limitations:

Limitations: Terrains

All terrains less than 7 million points will go directly into the iModel.
Terrains greater than 7 million points require the use of a Context Data Share which would have to be setup for the project.
Be aware that large terrains can greatly increase processing times.

Limitations: Subsurface

If your references contain Drainage & Utilities data, the main container file must have a subsurface project created.
- e.g. Place a node
Results properties (such as Velocity/Depth/Spread) will only be published from iTwin Synchronizer.

Limitations: OpenSite

Currently, OpenSite properties will not be included in the iModel.

Video:

www.youtube.com/watch

Tags: imodel, i-Model

Best Practices for Creating a Civil iModel

Kevin McDonald — Fri, 18 Dec 2020 18:15:55 GMT

Revision 9 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 12/18/2020 6:15:55 PM

Product(s):	OpenRoads Designer
Version(s):	10.08+
Area:	General

Question:

How do I prepare my OpenRoads data to be published to an iModel?

Answer:

Create a 2D container file with OpenRoads Designer.
- This container file needs to be created from the correct seed file in the Workspace used by the dataset.
- The container file needs to have the correct GCS for the project.
Attach all needed/required reference files.
- If the reference file has a default (2D) and default-3D model, attach the default (2D) model only.
- If the file has only a 2D model(s), attach each desired model as-is.
- If the file has only a 3D model(s), attach each desired model as-is.
Create a Civil model in the container file that results in the creation of a default-3D
- e.g. Make terrain active
Review the hierarchy of the reference files. Be sure that ALL required files\models are listed.
- Ensure the Reference Display = ON for each reference attachment you want to show in the iModel.
- Set the 3D-Default model within the “container” file to a minimum nesting depth of 1.

Current Limitations:

Limitations: Terrains

All terrains less than 7 million points will go directly into the iModel.
Terrains greater than 7 million points require the use of a Context Data Share which would have to be setup for the project.
Be aware that large terrains can greatly increase processing times.

Limitations: Subsurface

If your references contain Drainage & Utilities data, the main container file must have a subsurface project created.
- e.g. Place a node
Results properties (such as Velocity/Depth/Spread) will only be published from iTwin Synchronizer.

Limitations: OpenRail

Currently, OpenRail properties will not be included in the iModel.

Limitations: OpenSite

Currently, OpenSite properties will not be included in the iModel.

Video:

www.youtube.com/watch

Tags: imodel, i-Model

Best Practices for Creating a Civil iModel

Kevin McDonald — Fri, 18 Dec 2020 17:35:00 GMT

Revision 8 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 12/18/2020 5:35:00 PM

Product(s):	OpenRoads Designer
Version(s):	10.08+
Area:	General

Question:

How do I prepare my OpenRoads data to be published to an iModel?

Answer:

Create a 2D container file with OpenRoads Designer.
- This container file needs to be created from the correct seed file in the Workspace used by the dataset.
- The container file needs to have the correct GCS for the project.
Attach all needed/required reference files.
- If the reference file has a default (2D) and default-3D model, attach the default (2D) model only.
- If the file has only a 2D model(s), attach each desired model as-is.
- If the file has only a 3D model(s), attach each desired model as-is.
Create a Civil model in the container file that results in the creation of a default-3D
- e.g. Make terrain active
Review the hierarchy of the reference files. Be sure that ALL required files\models are listed.
- Ensure the Reference Display = ON for each reference attachment you want to show in the iModel.
- Set the 3D-Default model within the “container” file to a minimum nesting depth of 1.

Current Limitations:

Limitations: Terrains

All terrains less than 7 million points will go directly into the iModel.
Terrains greater than 7 million points require the use of a Context Data Share which would have to be setup for the project.
Be aware that large terrains can greatly increase processing times.

Limitations: Subsurface

If your references contain Drainage & Utilities data, the main container file must have a subsurface project created.
- e.g. Place a node
Results properties in the Drainage database (such as Velocity/Depth/Spread) that are populated by running the Compute Scenario command will only be published from iTwin Synchronizer.

Limitations: OpenRail

Currently, OpenRail properties will not be included in the iModel.

Limitations: OpenSite

Currently, OpenSite properties will not be included in the iModel.

Video:

www.youtube.com/watch

Tags: imodel, i-Model

Best Practices for Creating a Civil iModel

Kevin McDonald — Fri, 18 Dec 2020 16:38:36 GMT

Revision 7 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 12/18/2020 4:38:36 PM

Product(s):	OpenRoads Designer
Version(s):	10.08+
Area:	General

Question:

How do I prepare my OpenRoads data to be published to an iModel?

Answer:

Create a 2D container file with OpenRoads Designer.
- This container file needs to be created from the correct seed file in the Workspace used by the dataset.
- The container file needs to have the correct GCS for the project.
Attach all needed/required reference files.
- If the reference file has a default (2D) and default-3D model, attach the default (2D) model only.
- If the file has only a 2D model(s), attach each desired model as-is.
- If the file has only a 3D model(s), attach each desired model as-is.
Create a Civil model in the container file that results in the creation of a default-3D
- e.g. Make terrain active
Review the hierarchy of the reference files. Be sure that ALL required files\models are listed.
- Ensure the Reference Display = ON for each reference attachment you want to show in the iModel.
- Set the 3D-Default model within the “container” file to a minimum nesting depth of 1.

Current Limitations:

Limitations: Terrains

All terrains less than 7 million points will go directly into the iModel.
Terrains greater than 7 million points require the use of a Context Data Share which would have to be setup for the project.
Be aware that large terrains can greatly increase processing times.

Limitations: Subsurface

Subsurface properties are only published to Civil iModels from iTwin Synchronizer.
If your references contain Drainage & Utilities data, the main container file must have a subsurface project created.
- e.g. Place a node

Limitations: OpenRail

Currently, OpenRail properties will not be included in the iModel.

Limitations: OpenSite

Currently, OpenSite properties will not be included in the iModel.

Video:

www.youtube.com/watch

Tags: imodel, i-Model

Best Practices for Creating a Civil iModel

Kevin McDonald — Fri, 31 Jul 2020 14:14:39 GMT

Revision 6 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 7/31/2020 2:14:39 PM

Product(s):	OpenRoads Designer
Version(s):	10.08+
Area:	General

Question:

How do I prepare my OpenRoads data to be published to an iModel?

Answer:

Create a 2D container file with OpenRoads Designer.
- This container file needs to be created from the correct seed file in the Workspace used by the dataset.
- The container file needs to have the correct GCS for the project.
Attach all needed/required reference files.
- If the reference file has a default (2D) and default-3D model, attach the default (2D) model only.
- If the file has only a 2D model(s), attach each desired model as-is.
- If the file has only a 3D model(s), attach each desired model as-is.
Create a Civil model in the container file that results in the creation of a default-3D
- e.g. Make terrain active
Review the hierarchy of the reference files. Be sure that ALL required files\models are listed.
- Ensure the Reference Display = ON for each reference attachment you want to show in the iModel.
- Set the 3D-Default model within the “container” file to a minimum nesting depth of 1.

Current Limitations:

Limitations: Terrains

All terrains less than 7 million points will go directly into the iModel.
Terrains greater than 7 million points require the use of a Context Data Share which would have to be setup for the project.
Be aware that large terrains can greatly increase processing times.

Limitations: Subsurface

If your references contain Drainage & Utilities data, the main container file must have a subsurface project created.
- g. Place a node

Limitations: OpenRail

Currently, OpenRail properties will not be included in the iModel.

Limitations: OpenSite

Currently, OpenSite properties will not be included in the iModel.

Video:

www.youtube.com/watch

Tags: imodel, i-Model

Best Practices for Creating a Civil i-model

Kevin McDonald — Mon, 27 Jul 2020 21:00:27 GMT

Revision 5 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 7/27/2020 9:00:27 PM

Product(s):	OpenRoads Designer
Version(s):	10.08+
Area:	General

Question:

How do I prepare my OpenRoads data to be published to an i-model?

Answer:

Create a 2D container file with OpenRoads Designer.
- This container file needs to be created from the correct seed file in the Workspace used by the dataset.
- The container file needs to have the correct GCS for the project.
Attach all needed/required reference files.
- If the reference file has a default (2D) and default-3D model, attach the default (2D) model only.
- If the file has only a 2D model(s), attach each desired model as-is.
- If the file has only a 3D model(s), attach each desired model as-is.
Create a Civil model in the container file that results in the creation of a default-3D
- e.g. Make terrain active
Review the hierarchy of the reference files. Be sure that ALL required files\models are listed.
- Ensure the Reference Display = ON for each reference attachment you want to show in the iModel.
- Set the 3D-Default model within the “container” file to a minimum nesting depth of 1.

Current Limitations:

Limitations: Terrains

All terrains less than 7 million points will go directly into the iModel.
Terrains greater than 7 million points require the use of a Context Data Share which would have to be setup for the project.
Be aware that large terrains can greatly increase processing times.

Limitations: Subsurface

If your references contain Drainage & Utilities data, the main container file must have a subsurface project created.
- g. Place a node

Limitations: OpenRail

Currently, OpenRail properties will not be included in the iModel.

Limitations: OpenSite

Currently, OpenSite properties will not be included in the iModel.

Video:

www.youtube.com/watch

Tags: imodel, i-Model

Best Practices for Creating a Civil i-model

Kevin McDonald — Mon, 27 Jul 2020 20:59:36 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 7/27/2020 8:59:36 PM

Product(s):	OpenRoads Designer
Version(s):	10.08+
Area:	General

Question:

How do I prepare my OpenRoads data to be published to an i-model?

Answer:

Create a 2D container file with OpenRoads Designer.
- This container file needs to be created from the correct seed file in the Workspace used by the dataset.
- The container file needs to have the correct GCS for the project.
Attach all needed/required reference files.
- If the reference file has a default (2D) and default-3D model, attach the default (2D) model only.
- If the file has only a 2D model(s), attach each desired model as-is.
- If the file has only a 3D model(s), attach each desired model as-is.
Create a Civil model in the container file that results in the creation of a default-3D
- e.g. Make terrain active
Review the hierarchy of the reference files. Be sure that ALL required files\models are listed.
- Ensure the Reference Display = ON for each reference attachment you want to show in the iModel.
- Set the 3D-Default model within the “container” file to a minimum nesting depth of 1.

Current Limitations:

Limitations: Terrains

All terrains less than 7 million points will go directly into the iModel.
Terrains greater than 7 million points require the use of a Context Data Share which would have to be setup for the project.
Be aware that large terrains can greatly increase processing times.

Limitations: Subsurface

If your references contain Drainage & Utilities data, the main container file must have a subsurface project created.
- g. Place a node

Limitations: OpenRail

Currently, OpenRail properties will not be included in the iModel.

Limitations: OpenSite

Currently, OpenSite properties will not be included in the iModel.

Video:

www.youtube.com/watch

Tags: imodel, i-Model

Best Practices for Creating a Civil i-model

Kevin McDonald — Mon, 27 Jul 2020 20:46:31 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 7/27/2020 8:46:31 PM

Product(s):	OpenRoads Designer
Version(s):	10.08+
Area:	General

Question:

How do I prepare my OpenRoads/OpenRail data to be published to an i-model?

Answer:

Create a 2D container file with OpenRoads Designer.
- This container file needs to be created from the correct seed file in the Workspace used by the dataset.
- The container file needs to have the correct GCS for the project.
Attach all needed/required reference files.
- If the reference file has a default (2D) and default-3D model, attach the default (2D) model only.
- If the file has only a 2D model(s), attach each desired model as-is.
- If the file has only a 3D model(s), attach each desired model as-is.
Create a Civil model in the container file that results in the creation of a default-3D
- e.g. Make terrain active
Review the hierarchy of the reference files. Be sure that ALL required files\models are listed.
- Ensure the Reference Display = ON for each reference attachment you want to show in the iModel.
- Set the 3D-Default model within the “container” file to a minimum nesting depth of 1.

www.youtube.com/watch

Tags: imodel, i-Model

Best Practices for Creating a Civil i-model

Kevin McDonald — Mon, 27 Jul 2020 20:45:28 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 7/27/2020 8:45:28 PM

Product(s):	OpenRoads Designer
Version(s):	10.08+
Area:	General

Question:

How do I prepare my OpenRoads/OpenRail data to be published to an i-model?

Answer:

Create a 2D container file with OpenRoads Designer.
- This container file needs to be created from the correct seed file in the Workspace used by the dataset.
- The container file needs to have the correct GCS for the project.
Attach all needed/required reference files.
- If the reference file has a default (2D) and default-3D model, attach the default (2D) model only.
- If the file has only a 2D model(s), attach each desired model as-is.
- If the file has only a 3D model(s), attach each desired model as-is.
Create a Civil model in the container file that results in the creation of a default-3D
- e.g. Make terrain active
Review the hierarchy of the reference files. Be sure that ALL required files\models are listed.
- Ensure the Reference Display = ON for each reference attachment you want to show in the iModel.
- Set the 3D-Default model within the “container” file to a minimum nesting depth of 1.

www.youtube.com/watch

Tags: imodel

Best Practices for Creating a Civil i-model

Kevin McDonald — Mon, 27 Jul 2020 20:44:56 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 7/27/2020 8:44:56 PM

Product(s):	OpenRoads Designer
Version(s):	10.08+
Area:	General

Question:

How do I prepare my OpenRoads/OpenRail data in order to be published to an i-model?

Answer:

Create a 2D container file with OpenRoads Designer.
- This container file needs to be created from the correct seed file in the Workspace used by the dataset.
- The container file needs to have the correct GCS for the project.
Attach all needed/required reference files.
- If the reference file has a default (2D) and default-3D model, attach the default (2D) model only.
- If the file has only a 2D model(s), attach each desired model as-is.
- If the file has only a 3D model(s), attach each desired model as-is.
Create a Civil model in the container file that results in the creation of a default-3D
- e.g. Make terrain active
Review the hierarchy of the reference files. Be sure that ALL required files\models are listed.
- Ensure the Reference Display = ON for each reference attachment you want to show in the iModel.
- Set the 3D-Default model within the “container” file to a minimum nesting depth of 1.

www.youtube.com/watch

Tags: imodel