"Class not registered" VBA Error

Jacob Dean — Thu, 07 Jan 2021 14:26:31 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jacob Dean on 1/7/2021 2:26:31 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

If you recently updated or modified Microsoft Office, that was most likely the cause of the issue. This means that there is a missing or incorrect Microsoft Windows registry entry for the Dynamic Link Library FM20.dll. To fix this issue, do the following:

For 32-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

For 64-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "cd C:\Windows\SysWOW64\"
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

If you confirmed that the above didn't fix your problem, you may try to uninstall/reinstall InRoads to see if it helps. If not, then try reinstalling a 32-bit version of Microsoft Office.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" VBA Error

Beebe Ray — Wed, 06 Jan 2021 16:02:20 GMT

Revision 20 posted to OpenRoads | OpenSite Wiki by Beebe Ray on 1/6/2021 4:02:20 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

For 32-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

For 64-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "cd C:\Windows\SysWOW64\"
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

If you confirmed that the above didn't fix your problem, you may try to uninstall/reinstall InRoads to see if it helps. If not, then try reinstalling a 32-bit version of Microsoft Office.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" VBA Error

Jacob Dean — Fri, 18 Dec 2020 15:33:02 GMT

Revision 19 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/18/2020 3:33:02 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

For 32-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

For 64-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "cd C:\Windows\SysWOW64\"
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

If you confirmed that the above didn't fix your problem, you may try to uninstall/reinstall InRoads to see if it helps. If not, then try reinstalling a 32-bit version of Microsoft Office.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Fri, 18 Dec 2020 15:31:08 GMT

Revision 18 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/18/2020 3:31:08 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

For 32-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

For 64-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "cd C:\Windows\SysWOW64\"
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

If you confirmed that the above didn't fix your problem, you may try to uninstall/reinstall InRoads to see if it helps. If not, then try reinstalling a 32-bit version of Microsoft Office.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Fri, 18 Dec 2020 15:30:52 GMT

Revision 17 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/18/2020 3:30:52 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

For 32-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

For 64-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "cd C:\Windows\SysWOW64\"
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

If you confirmed that the above didn't fix your problem, you may try to uninstall/reinstall InRoads to see if it helps. If not, then try reinstalling a 32-bit version of Microsoft Office.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Fri, 18 Dec 2020 15:30:30 GMT

Revision 16 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/18/2020 3:30:30 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

For 32-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

For 64-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "cd C:\Windows\SysWOW64\"
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

If you confirmed that the above didn't fix your problem, you may try to uninstall/reinstall InRoads to see if it helps. If not, then try reinstalling a 32-bit version of Microsoft Office.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Fri, 18 Dec 2020 15:30:01 GMT

Revision 15 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/18/2020 3:30:01 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

For 32-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

For 64-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "cd C:\Windows\SysWOW64\"
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

If you confirmed that the above didn't fix your problem, you may try to uninstall/reinstall InRoads to see if it helps. If not, then try reinstalling a 32-bit version of Microsoft Office.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Fri, 18 Dec 2020 15:29:14 GMT

Revision 14 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/18/2020 3:29:14 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

For 32-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

For 64-bit OS:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "cd C:\Windows\SysWOW64\"
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists.

You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

If you confirmed that the above didn't fix your problem, you may try to uninstall/reinstall InRoads to see if it helps. If not, then try reinstalling a 32-bit version of Microsoft Office.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Fri, 18 Dec 2020 15:12:57 GMT

Revision 13 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/18/2020 3:12:57 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists. You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

If you confirmed that the above didn't fix your problem, you may try to uninstall/reinstall InRoads to see if it helps. If not, then try reinstalling a 32-bit version of Microsoft Office.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Fri, 18 Dec 2020 15:12:44 GMT

Revision 12 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/18/2020 3:12:44 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists. You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

If you confirmed that the above didn't fix your problem, you may try to uninstall/reinstall InRoads to see if it helps. If not, then try reinstalling a 32-bit version of Microsoft Office.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Fri, 18 Dec 2020 15:12:31 GMT

Revision 11 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/18/2020 3:12:31 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists. You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

If you confirmed that the above didn't fix your problem, you may try to uninstall/reinstall InRoads to see if it helps. If not, then try reinstalling a 32-bit version of Microsoft Office.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Thu, 17 Dec 2020 17:16:59 GMT

Revision 10 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/17/2020 5:16:59 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

If you recently updated or modified Microsoft Excel, that was most likely the cause of the issue. This means that there is a missing or incorrect Microsoft Windows registry entry for the Dynamic Link Library FM20.dll. To fix this issue, do the following:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists. You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Thu, 17 Dec 2020 16:17:58 GMT

Revision 9 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/17/2020 4:17:58 PM

Product(s):	InRoads
Version(s):	08.11.07+, 08.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists. You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Thu, 17 Dec 2020 16:16:31 GMT

Revision 8 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/17/2020 4:16:31 PM

Product(s):	InRoads
Version(s):	8.11.07+, 8.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists. You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Thu, 17 Dec 2020 16:15:38 GMT

Revision 7 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/17/2020 4:15:38 PM

Product(s):	InRoads
Version(s):	8.11.07+, 8.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists. You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Thu, 17 Dec 2020 16:14:50 GMT

Revision 6 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/17/2020 4:14:50 PM

Product(s):	InRoads
Version(s):	8.11.07+, 8.11.09+
Area:	General

Product(s):	InRoads
Version(s):	8.11.07+, 8.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists. You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Thu, 17 Dec 2020 16:13:37 GMT

Revision 5 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/17/2020 4:13:37 PM

Product(s):	InRoads
Version(s):	8.11.07+, 8.11.09+
Area:	General

Problem:

Received the following error when trying to open a file.

Solution:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists. You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Thu, 17 Dec 2020 16:10:48 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/17/2020 4:10:48 PM

Problem:

Received the following error when trying to open a file.

Solution:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists. You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Thu, 17 Dec 2020 16:09:24 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/17/2020 4:09:24 PM

Problem:

Received the following error when trying to open a file.

Solution:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists. You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator, and try again.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Thu, 17 Dec 2020 16:08:49 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/17/2020 4:08:49 PM

Problem:

Received the following error when trying to open a file.

Solution:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists. You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator and try again.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office

"Class not registered" Error

Jacob Dean — Thu, 17 Dec 2020 16:07:56 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 12/17/2020 4:07:56 PM

Problem:

Received the following error when trying to open a file.

Solution:

Make sure Bentley products are closed
Open Command Prompt as Administrator
Type "regsvr32 FM20.dll" and hit ENTER
Verify if the issue persists. You should get the following message if it completed successfully.

If you want to check to see that FM20.dll registered correctly, do the following:

Open the Registry Editor (Start > Run > regedit)
Use CTRL + F to find the CLSID. Using the picture above as an example, you would search "C62A69F0".
Select the different keys until you find the file path of FM20.dll. It should have worked if it says C:\WINDOWS\system32\FM20.dll

If you received the following message, make sure you are running Command Prompt as Administrator and try again.

Tags: Startup, Excel, InRoads, OpenRoads, Geopak, Microsoft office