0xc0000005 (Access Violation)

Jacob Dean — Wed, 22 Sep 2021 15:20:40 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jacob Dean on 9/22/2021 3:20:40 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Option 1: When prompted to "restart to load the new configuration", select 'No'.

Option 2: Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.

Option 3: Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program. Try using Microsoft's System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.

https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e
Sometimes Windows cumulative updates can mess up something that was previously working. The opposite is also true, in that your software updated and depends on a Windows update that hasn't been installed yet. Try checking your Update History to see if Windows installed any updates around the same time that you started to experience your issue. Specifically check for .NET Framework updates similar to the one in the picture below. These updates can be listed under "Quality Updates" or "Other Updates", so check both drop-down lists.

If you believe one or more of the updates could have caused your issue(s) then you can uninstall the update(s) by clicking on the "Uninstall updates" link at the top of the page. This will bring up a new dialog box, and this will be where you can uninstall the update(s). Make sure you are uninstalling the correct update(s) by using the Update History dialog to cross reference the number and date of the update(s). You are also able to reinstall these updates by finding them on the Microsoft Update Catalog. If you want to easily find your specific update, you may want to keep a record of the alphanumeric ID that is to the right of the update title (i.e. KB5003256) and search that in the catalog.

0xc0000005 (Access Violation)

Jacob Dean — Mon, 09 Aug 2021 22:40:32 GMT

Revision 16 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 8/9/2021 10:40:32 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Option 1: When prompted to "restart to load the new configuration", select 'No'.

Option 2: Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.

Option 3: Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program. Try using Microsoft's System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.

https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e
Sometimes Windows cumulative updates can mess up something that was previously working. The opposite is also true, in that your software updated and depends on a Windows update that hasn't been installed yet. Try checking your Update History to see if Windows installed any updates around the same time that you started to experience your issue. Specifically check for .NET Framework updates similar to the one in the picture below. These updates can be listed under "Quality Updates" or "Other Updates", so check both drop-down lists.

If you believe one or more of the updates could have caused your issue(s) then you can uninstall the update(s) by clicking on the "Uninstall updates" link at the top of the page. This will bring up a new dialog box, and this will be where you can uninstall the update(s). Make sure you are uninstalling the correct update(s) by using the Update History dialog to cross reference the number and date of the update(s). You are also able to reinstall these updates by finding them on the Microsoft Update Catalog (link included below).

Microsoft Update Catalog

0xc0000005 (Access Violation)

Jacob Dean — Mon, 09 Aug 2021 22:40:14 GMT

Revision 15 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 8/9/2021 10:40:14 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Option 1: When prompted to "restart to load the new configuration", select 'No'.

Option 2: Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.

Option 3: Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program. Try using Microsoft's System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.

https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e
Sometimes Windows cumulative updates can mess up something that was previously working. The opposite is also true, in that your software updated and depends on a Windows update that hasn't been installed yet. Try checking your Update History to see if Windows installed any updates around the same time that you started to experience your issue. Specifically check for .NET Framework updates similar to the one in the picture below. These updates can be listed under "Quality Updates" or "Other Updates", so check both drop-down lists.

If you believe one or more of the updates could have caused your issue(s) then you can uninstall the update(s) by clicking on the "Uninstall updates" link at the top of the page. This will bring up a new dialog box, and this will be where you can uninstall the update(s). Make sure you are uninstalling the correct update(s) by using the Update History dialog to cross reference the number and date of the update(s). You are also able to reinstall these updates by finding them on the Microsoft Update Catalog (link included below).

Microsoft Update Catalog

0xc0000005 (Access Violation)

Jacob Dean — Tue, 29 Jun 2021 15:56:29 GMT

Revision 14 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 6/29/2021 3:56:29 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Option 1: When prompted to "restart to load the new configuration", select 'No'.

Option 2: Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.

Option 3: Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program. Try using Microsoft's System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.

https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e
Sometimes Windows cumulative updates can mess up something that was previously working. Try checking your Update History to see if Windows recently installed any updates. Specifically check for .NET Framework updates similar to the one in the picture below. These updates can be listed under "Quality Updates" or "Other Updates", so check both drop-down lists.

0xc0000005 (Access Violation)

Jacob Dean — Tue, 29 Jun 2021 15:46:28 GMT

Revision 13 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 6/29/2021 3:46:28 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Option 1: When prompted to "restart to load the new configuration", select 'No'.

Option 2: Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.

Option 3: Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program. Try using Microsoft's System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.

https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e
Sometimes Windows cumulative updates can mess up something that was previously working. Try checking your Update History to see if Windows recently installed any updates. Specifically check for .NET Framework updates similar to the one in the picture below. These updates can be listed under "Quality Updates" and "Other Updates", so check both drop-down lists.

0xc0000005 (Access Violation)

Jacob Dean — Tue, 29 Jun 2021 15:43:31 GMT

Revision 12 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 6/29/2021 3:43:31 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Option 1: When prompted to "restart to load the new configuration", select 'No'.

Option 2: Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.

Option 3: Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program. Try using Microsoft's System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.

https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e
Sometimes Windows cumulative updates can mess up something that was previously working. Try checking your Update History to see if Windows recently installed any updates. Specifically check for .NET Framework updates like the one in the picture below.

0xc0000005 (Access Violation)

Jacob Dean — Tue, 29 Jun 2021 15:42:29 GMT

Revision 11 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 6/29/2021 3:42:29 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Option 1: When prompted to "restart to load the new configuration", select 'No'.

Option 2: Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.

Option 3: Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program. Try using Microsoft's System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.

https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e
Sometimes Windows cumulative updates can mess up something that was previously working. Try checking your Update History to see if Windows recently installed any updates. Specifically check for .NET Framework updates like the one in the picture below.

0xc0000005 (Access Violation)

Jacob Dean — Fri, 25 Jun 2021 21:39:10 GMT

Revision 10 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 6/25/2021 9:39:10 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Option 1: When prompted to "restart to load the new configuration", select 'No'.

Option 2: Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.

Option 3: Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program. Try using Microsoft's System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.

https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e

0xc0000005 (Access Violation)

Jacob Dean — Fri, 25 Jun 2021 21:38:37 GMT

Revision 9 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 6/25/2021 9:38:37 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Option 1: When prompted to "restart to load the new configuration", select 'No'.

Option 2: Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.

Option 3: Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program. Try using the System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.

https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e

0xc0000005 (Access Violation)

Jacob Dean — Fri, 25 Jun 2021 13:22:32 GMT

Revision 8 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 6/25/2021 1:22:32 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Option 1: When prompted to "restart to load the new configuration", select 'No'.

Option 2: Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.

Option 3: Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program. First, try using the System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.

https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e

0xc0000005 (Access Violation)

Jacob Dean — Thu, 24 Jun 2021 21:25:36 GMT

Revision 7 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 6/24/2021 9:25:36 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Option 1: When prompted to "restart to load the new configuration", select 'No'.

Option 2: Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.

Option 3: Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program.First, try using the System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.

https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e

0xc0000005 (Access Violation)

Jacob Dean — Thu, 24 Jun 2021 21:24:37 GMT

Revision 6 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 6/24/2021 9:24:37 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Option 1: When prompted to "restart to load the new configuration", select 'No'.

Option 2: Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.

Option 3: Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program.First, try using the System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.
https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e

0xc0000005 (Access Violation)

Jacob Dean — Thu, 24 Jun 2021 21:11:12 GMT

Revision 5 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 6/24/2021 9:11:12 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Option 1: When prompted to "restart to load the new configuration", select 'No'.

Option 2: Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.

Option 3: Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program.First, try using the System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.
https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e

0xc0000005 (Access Violation)

Jacob Dean — Thu, 24 Jun 2021 21:10:40 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 6/24/2021 9:10:40 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Potential Workarounds:

Option 1: When prompted to "restart to load the new configuration", select 'No'.

Option 2: Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.

Option 3: Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program.First, try using the System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.
https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e

0xc0000005 (Access Violation)

Jacob Dean — Thu, 24 Jun 2021 21:09:43 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 6/24/2021 9:09:43 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Potential Workarounds:
Option 1 - When prompted to "restart to load the new configuration", select 'No'.
Option 2 - Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.
Option 3 - Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program.First, try using the System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.
https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e

0xc0000005 (Access Violation)

Jacob Dean — Thu, 24 Jun 2021 21:09:13 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 6/24/2021 9:09:13 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Potential Workarounds:
Option 1 - When prompted to "restart to load the new configuration", select 'No'.
Option 2 - Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.
Option 3 - Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program.First, try using the System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.
https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e

0xc0000005 (Access Violation)

Jacob Dean — Thu, 24 Jun 2021 21:08:15 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacob Dean on 6/24/2021 9:08:15 PM

Product(s):	OpenRoads Designer, OpenRail Designer, OpenSite Designer, InRoads, GEOPAK
Version(s):	CONNECT, V8i
Area:	Errors/Exceptions

Solution:

One known cause is ProjectWise believes it needs to reload the workspace when closing the file with the named boundaries and opening the file with the Drawing/Sheet models. In this situation, you are asked if you want to "restart to load the new configuration". If you select 'Yes', you are prompted to Check in or Update the Server copy of the files. If Update Server Copy is selected, the software crashes.

Potential Workarounds:
Option 1 - When prompted to "restart to load the new configuration", select 'No'.
Option 2 - Set PW_MWP_COMPARISON_IGNORE_LIST to include any variables such as MS_RFDIR that use _DGNDIR. This can be done in the mcm.user.cfg file or at another level in the workspace.
Option 3 - Remove all use of $(_DGNDIR) from workspace.
This can also be caused by your computer not being able to process the files/settings required to run a particular program.First, try using the System File Checker (SFC) to check for corrupted Windows system files because it will try to replace the problematic system files.
https://support.microsoft.com/en-us/topic/use-the-system-file-checker-tool-to-repair-missing-or-corrupted-system-files-79aa86cb-ca52-166a-92a3-966e85d4094e