You are currently reviewing an older revision of this page.
When opening a design file in Microstation alone, temporary survey graphics that have been previously displayed remain in the file.
or
When opening a design file with InRoads and MicroStation, graphics are visible until a MicroStation command is run, then the graphics disappear.
When displaying temporary survey graphics in a design file using the command Survey > View Survey Data, it is important to recognize that these graphics are actually written to the design file as graphic elements. What makes these graphics “temporary” is that they are marked with an XAttribute which only makes them visible when the fwd containing the data is loaded in InRoads.
However, circumstances may arise where these temporary graphics are visible in the design file when the file is opened in Microstation alone. There are two ways to fix this issue and remove the graphics from the design file.
Product TechNotes and FAQs
InRoads Product TechNotes FAQs And Support Video Clips
Bentley Technical Support KnowledgeBase
Bentley LEARN Server
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!