Geometry Reports - Changing Cardinal Point Abbreviations

Jacquelyn Pettus — Fri, 17 Oct 2014 16:50:20 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 10/17/2014 4:50:20 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Amalysis & Reporting
Original Author:	Kevin McDonald, Bentley Technical Support Group

Problem:

Can I change the Cardinal Point abbreviations used in reports? If so, how?

Solution:

Yes, it can be done. Points like P.C & S.C. are hard coded in the reports for SELECT series 3 folders:

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\CivilGeometry.

To change, navigate to

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\format.xsl

and edit as needed by changing the return value.

// Converts the point type to a user defined type, modify the value after the return, not the case value

// As an example case "POB" : return "P.O.B."; will change the POB to P.O.B.

// If in doubt, contact Development

function pointType( pointSubtype )

{

switch ( pointSubtype )

{

case "POB" : return "POB";

case "POE" : return "POE";

case "PC" : return "PC";

case "PT" : return "PT";

case "PI" : return "PI";

case "CC" : return "CC";

case "PRC" : return "PRC";

case "PCC" : return "PCC";

case "TS" : return "TS";

case "SC" : return "SC";

case "CS" : return "CS";

case "ST" : return "ST";

case "SPI" : return "SPI";

case "SS" : return "SS";

case "POT" : return "POT";

case "POC" : return "POC";

case "POS" : return "POS";

case "PVC" : return "PVC";

case "PVI" : return "PVI";

case "PVT" : return "PVT";

case "PVCC" : return "PVCC";

case "PVRC" : return "PVRC";

case "VHigh" : return "HP";

case "VLow" : return "LP";

case "POVT" : return "POVT";

case "POVC" : return "POVC";

default: return pointSubtype;

Tags: MX, InRoads, SELECTservices, TechNote, Geopak

Geometry Reports - Changing Cardinal Point Abbreviations

Jacquelyn Pettus — Fri, 17 Oct 2014 16:49:36 GMT

Revision 9 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 10/17/2014 4:49:36 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Basic Settings
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Problem:

Can I change the Cardinal Point abbreviations used in reports? If so, how?

Solution:

Yes, it can be done. Points like P.C & S.C. are hard coded in the reports for SELECT series 3 folders:

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\CivilGeometry.

To change, navigate to

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\format.xsl

and edit as needed by changing the return value.

// Converts the point type to a user defined type, modify the value after the return, not the case value

// As an example case "POB" : return "P.O.B."; will change the POB to P.O.B.

// If in doubt, contact Development

function pointType( pointSubtype )

{

switch ( pointSubtype )

{

case "POB" : return "POB";

case "POE" : return "POE";

case "PC" : return "PC";

case "PT" : return "PT";

case "PI" : return "PI";

case "CC" : return "CC";

case "PRC" : return "PRC";

case "PCC" : return "PCC";

case "TS" : return "TS";

case "SC" : return "SC";

case "CS" : return "CS";

case "ST" : return "ST";

case "SPI" : return "SPI";

case "SS" : return "SS";

case "POT" : return "POT";

case "POC" : return "POC";

case "POS" : return "POS";

case "PVC" : return "PVC";

case "PVI" : return "PVI";

case "PVT" : return "PVT";

case "PVCC" : return "PVCC";

case "PVRC" : return "PVRC";

case "VHigh" : return "HP";

case "VLow" : return "LP";

case "POVT" : return "POVT";

case "POVC" : return "POVC";

default: return pointSubtype;

Tags: MX, InRoads, SELECTservices, TechNote, Geopak

Geometry Reports - Changing Cardinal Point Abbreviations

Jacquelyn Pettus — Fri, 17 Oct 2014 16:48:27 GMT

Revision 8 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 10/17/2014 4:48:27 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	Basic Settings
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Problem:

Can I change the Cardinal Point abbreviations used in reports? If so, how?

Solution:

Yes, it can be done. Points like P.C & S.C. are hard coded in the reports for SELECT series 3 folders:

ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\CivilGeometry.

To change, navigate to

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\format.xsl

and edit as needed by changing the return value.

// Converts the point type to a user defined type, modify the value after the return, not the case value

// As an example case "POB" : return "P.O.B."; will change the POB to P.O.B.

// If in doubt, contact Development

function pointType( pointSubtype )

{

switch ( pointSubtype )

{

case "POB" : return "POB";

case "POE" : return "POE";

case "PC" : return "PC";

case "PT" : return "PT";

case "PI" : return "PI";

case "CC" : return "CC";

case "PRC" : return "PRC";

case "PCC" : return "PCC";

case "TS" : return "TS";

case "SC" : return "SC";

case "CS" : return "CS";

case "ST" : return "ST";

case "SPI" : return "SPI";

case "SS" : return "SS";

case "POT" : return "POT";

case "POC" : return "POC";

case "POS" : return "POS";

case "PVC" : return "PVC";

case "PVI" : return "PVI";

case "PVT" : return "PVT";

case "PVCC" : return "PVCC";

case "PVRC" : return "PVRC";

case "VHigh" : return "HP";

case "VLow" : return "LP";

case "POVT" : return "POVT";

case "POVC" : return "POVC";

default: return pointSubtype;

Tags: MX, InRoads, SELECTservices, TechNote, Geopak

Geometry Reports - Changing Cardinal Point Abbreviations

Jacquelyn Pettus — Wed, 23 Jul 2014 19:19:57 GMT

Revision 7 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 7/23/2014 7:19:57 PM


	Applies To

	Product(s):	InRoads, GEOPAK, MX
	Version(s):	V8.11.9+
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Reports – Cardinal Points

Question: Can I change the Cardinal Point abbreviations used in reports? If so, how?

Yes, it can be done. Points like P.C & S.C. are hard coded in the reports for SELECT series 3 folders:

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\CivilGeometry.

To change, navigate to

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\format.xsl

and edit as needed by changing the return value.

// Converts the point type to a user defined type, modify the value after the return, not the case value

// As an example case "POB" : return "P.O.B."; will change the POB to P.O.B.

// If in doubt, contact Development

function pointType( pointSubtype )

{

switch ( pointSubtype )

{

case "POB" : return "POB";

case "POE" : return "POE";

case "PC" : return "PC";

case "PT" : return "PT";

case "PI" : return "PI";

case "CC" : return "CC";

case "PRC" : return "PRC";

case "PCC" : return "PCC";

case "TS" : return "TS";

case "SC" : return "SC";

case "CS" : return "CS";

case "ST" : return "ST";

case "SPI" : return "SPI";

case "SS" : return "SS";

case "POT" : return "POT";

case "POC" : return "POC";

case "POS" : return "POS";

case "PVC" : return "PVC";

case "PVI" : return "PVI";

case "PVT" : return "PVT";

case "PVCC" : return "PVCC";

case "PVRC" : return "PVRC";

case "VHigh" : return "HP";

case "VLow" : return "LP";

case "POVT" : return "POVT";

case "POVC" : return "POVC";

default: return pointSubtype;

External Links

Bentley Technical Support KnowledgeBase

Tags: MX, InRoads, SELECTservices, TechNote, Geopak

Geometry Reports - Changing Cardinal Point Abbreviations

Elisabeth Pry — Mon, 24 Jun 2013 14:50:54 GMT

Revision 6 posted to OpenRoads | OpenSite Wiki by Elisabeth Pry on 6/24/2013 2:50:54 PM


	Applies To

	Product(s):	InRoads, GEOPAK, MX
	Version(s):	V8.11.9+
	Environment:	N/A
	Area:	N/A
	Subarea:	N/A
	Original Author:	Bentley Technical Support Group

Reports – Cardinal Points

Question: Can I change the Cardinal Point abbreviations used in reports? If so, how?

Yes, it can be done. Points like P.C & S.C. are hard coded in the reports for SELECT series 3 folders:

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\CivilGeometry.

To change, navigate to

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\format.xsl

and edit as needed by changing the return value.

// Converts the point type to a user defined type, modify the value after the return, not the case value

// As an example case "POB" : return "P.O.B."; will change the POB to P.O.B.

// If in doubt, contact Development

function pointType( pointSubtype )

{

switch ( pointSubtype )

{

case "POB" : return "POB";

case "POE" : return "POE";

case "PC" : return "PC";

case "PT" : return "PT";

case "PI" : return "PI";

case "CC" : return "CC";

case "PRC" : return "PRC";

case "PCC" : return "PCC";

case "TS" : return "TS";

case "SC" : return "SC";

case "CS" : return "CS";

case "ST" : return "ST";

case "SPI" : return "SPI";

case "SS" : return "SS";

case "POT" : return "POT";

case "POC" : return "POC";

case "POS" : return "POS";

case "PVC" : return "PVC";

case "PVI" : return "PVI";

case "PVT" : return "PVT";

case "PVCC" : return "PVCC";

case "PVRC" : return "PVRC";

case "VHigh" : return "HP";

case "VLow" : return "LP";

case "POVT" : return "POVT";

case "POVC" : return "POVC";

default: return pointSubtype;

External Links

Bentley Technical Support KnowledgeBase

Tags: MX, InRoads, SELECTservices, TechNote, Geopak

Geometry Reports - Changing Cardinal Point Abbreviations

Kevin McDonald — Tue, 16 Apr 2013 18:43:44 GMT

Revision 5 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 4/16/2013 6:43:44 PM

Document Information

Document Type: Technote

Product(s): InRoads, GEOPAK, MX

Version(s): V8.11.9+

Reports – Cardinal Points

Question: Can I change the Cardinal Point abbreviations used in reports? If so, how?

Yes, it can be done. Points like P.C & S.C. are hard coded in the reports for SELECT series 3 folders:

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\CivilGeometry.

To change, navigate to

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\format.xsl

and edit as needed by changing the return value.

// Converts the point type to a user defined type, modify the value after the return, not the case value

// As an example case "POB" : return "P.O.B."; will change the POB to P.O.B.

// If in doubt, contact Development

function pointType( pointSubtype )

{

switch ( pointSubtype )

{

case "POB" : return "POB";

case "POE" : return "POE";

case "PC" : return "PC";

case "PT" : return "PT";

case "PI" : return "PI";

case "CC" : return "CC";

case "PRC" : return "PRC";

case "PCC" : return "PCC";

case "TS" : return "TS";

case "SC" : return "SC";

case "CS" : return "CS";

case "ST" : return "ST";

case "SPI" : return "SPI";

case "SS" : return "SS";

case "POT" : return "POT";

case "POC" : return "POC";

case "POS" : return "POS";

case "PVC" : return "PVC";

case "PVI" : return "PVI";

case "PVT" : return "PVT";

case "PVCC" : return "PVCC";

case "PVRC" : return "PVRC";

case "VHigh" : return "HP";

case "VLow" : return "LP";

case "POVT" : return "POVT";

case "POVC" : return "POVC";

default: return pointSubtype;

External Links

Bentley Technical Support KnowledgeBase

Geometry Reports - Changing Cardinal Point Abbreviations

Kevin McDonald — Tue, 16 Apr 2013 18:43:17 GMT

Revision 4 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 4/16/2013 6:43:17 PM

Document Information

Document Type: Technote

Product(s): InRoads, GEOPAK, MX

Version(s): V8.11.9+

Reports – Cardinal Points

Question: Can I change the Cardinal Point abbreviations used in reports? If so, how?

Yes, it can be done. Points like P.C & S.C. are hard coded in the reports for SELECT series 3 folders:

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\CivilGeometry.

To change, navigate to

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\format.xsl

and edit as needed by changing the return value.

// Converts the point type to a user defined type, modify the value after the return, not the case value

// As an example case "POB" : return "P.O.B."; will change the POB to P.O.B.

// If in doubt, contact Development

function pointType( pointSubtype )

{

switch ( pointSubtype )

{

case "POB" : return "POB";

case "POE" : return "POE";

case "PC" : return "PC";

case "PT" : return "PT";

case "PI" : return "PI";

case "CC" : return "CC";

case "PRC" : return "PRC";

case "PCC" : return "PCC";

case "TS" : return "TS";

case "SC" : return "SC";

case "CS" : return "CS";

case "ST" : return "ST";

case "SPI" : return "SPI";

case "SS" : return "SS";

case "POT" : return "POT";

case "POC" : return "POC";

case "POS" : return "POS";

case "PVC" : return "PVC";

case "PVI" : return "PVI";

case "PVT" : return "PVT";

case "PVCC" : return "PVCC";

case "PVRC" : return "PVRC";

case "VHigh" : return "HP";

case "VLow" : return "LP";

case "POVT" : return "POVT";

case "POVC" : return "POVC";

default: return pointSubtype;

External Links

Bentley Technical Support KnowledgeBase

Geometry Reports - Changing Cardinal Point Abbreviations

Kevin McDonald — Tue, 16 Apr 2013 18:42:47 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 4/16/2013 6:42:47 PM

Document Information

Document Type: Technote

Product(s): InRoads, GEOPAK, MX

Version(s): V8.11.9+

Reports – Cardinal Points

Question: Can I change the Cardinal Point abbreviations used in reports? If so, how?

Yes, it can be done. Points like P.C & S.C. are hard coded in the reports for SELECT series 3 folders:

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\CivilGeometry.

To change, navigate to

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\format.xsl

and edit as needed by changing the return value.

// Converts the point type to a user defined type, modify the value after the return, not the case value

// As an example case "POB" : return "P.O.B."; will change the POB to P.O.B.

// If in doubt, contact Development

function pointType( pointSubtype )

{

switch ( pointSubtype )

{

case "POB" : return "POB";

case "POE" : return "POE";

case "PC" : return "PC";

case "PT" : return "PT";

case "PI" : return "PI";

case "CC" : return "CC";

case "PRC" : return "PRC";

case "PCC" : return "PCC";

case "TS" : return "TS";

case "SC" : return "SC";

case "CS" : return "CS";

case "ST" : return "ST";

case "SPI" : return "SPI";

case "SS" : return "SS";

case "POT" : return "POT";

case "POC" : return "POC";

case "POS" : return "POS";

case "PVC" : return "PVC";

case "PVI" : return "PVI";

case "PVT" : return "PVT";

case "PVCC" : return "PVCC";

case "PVRC" : return "PVRC";

case "VHigh" : return "HP";

case "VLow" : return "LP";

case "POVT" : return "POVT";

case "POVC" : return "POVC";

default: return pointSubtype;

External Links

Bentley Technical Support KnowledgeBase

Geometry Reports - Changing Cardinal Point Abbreviations

Kevin McDonald — Tue, 16 Apr 2013 18:38:20 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 4/16/2013 6:38:20 PM

Document Information

Document Type: Technote

Product(s): InRoads, GEOPAK, MX

Version(s): V8.11.9+

Reports –Cardinal Points

Question: Can I change the Cardinal Point abbreviations used in reports? If so, how?

Yes, it can be done. Points like P.C & S.C. are hard coded in the reports for SELECT series 3 folders:

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\CivilGeometry.

To change, navigate to

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\format.xsl

and edit as needed by changing the return value.

// Converts the point type to a user defined type, modify the value after the return, not the case value

// As an example case "POB" : return "P.O.B."; will change the POB to P.O.B.

// If in doubt, contact Development

function pointType( pointSubtype )

{

switch ( pointSubtype )

{

case "POB" : return "POB";

case "POE" : return "POE";

case "PC" : return "PC";

case "PT" : return "PT";

case "PI" : return "PI";

case "CC" : return "CC";

case "PRC" : return "PRC";

case "PCC" : return "PCC";

case "TS" : return "TS";

case "SC" : return "SC";

case "CS" : return "CS";

case "ST" : return "ST";

case "SPI" : return "SPI";

case "SS" : return "SS";

case "POT" : return "POT";

case "POC" : return "POC";

case "POS" : return "POS";

case "PVC" : return "PVC";

case "PVI" : return "PVI";

case "PVT" : return "PVT";

case "PVCC" : return "PVCC";

case "PVRC" : return "PVRC";

case "VHigh" : return "HP";

case "VLow" : return "LP";

case "POVT" : return "POVT";

case "POVC" : return "POVC";

default: return pointSubtype;

External Links

Bentley Technical Support KnowledgeBase

Geometry Reports - Changing Cardinal Point Abbreviations

Kevin McDonald — Tue, 16 Apr 2013 18:37:20 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Kevin McDonald on 4/16/2013 6:37:20 PM

Document Information

Document Type: Technote

Product(s): InRoads, GEOPAK, MX

Version(s): V8.11.9+

Reports –Cardinal Points

Question: Can I change the Cardinal Point abbreviations used in reports? If so, how?

Yes, it can be done. Points like P.C & S.C. are hard coded in the reports for SELECT series 3 folders:

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\CivilGeometry.

To change, navigate to

C:\ProgramData\Bentley\Civil\ReportBrowser\8.11.9\en\format.xsl

and edit as needed by changing the return value.

// Converts the point type to a user defined type, modify the value after the return, not the case value

// As an example case "POB" : return "P.O.B."; will change the POB to P.O.B.

// If in doubt, contact Development

function pointType( pointSubtype )

{

switch ( pointSubtype )

{

case "POB" : return "POB";

case "POE" : return "POE";

case "PC" : return "PC";

case "PT" : return "PT";

case "PI" : return "PI";

case "CC" : return "CC";

case "PRC" : return "PRC";

case "PCC" : return "PCC";

case "TS" : return "TS";

case "SC" : return "SC";

case "CS" : return "CS";

case "ST" : return "ST";

case "SPI" : return "SPI";

case "SS" : return "SS";

case "POT" : return "POT";

case "POC" : return "POC";

case "POS" : return "POS";

case "PVC" : return "PVC";

case "PVI" : return "PVI";

case "PVT" : return "PVT";

case "PVCC" : return "PVCC";

case "PVRC" : return "PVRC";

case "VHigh" : return "HP";

case "VLow" : return "LP";

case "POVT" : return "POVT";

case "POVC" : return "POVC";

default: return pointSubtype;

External Links

Bentley Technical Support KnowledgeBase

Geometry Reports - Changing Cardinal Point Abbreviations

Geometry Reports - Changing Cardinal Point Abbreviations

Geometry Reports - Changing Cardinal Point Abbreviations

Geometry Reports - Changing Cardinal Point Abbreviations

Geometry Reports - Changing Cardinal Point Abbreviations

See Also

External Links

Geometry Reports - Changing Cardinal Point Abbreviations

See Also

External Links

Geometry Reports - Changing Cardinal Point Abbreviations

Document Information

Reports – Cardinal Points

See Also

External Links

Geometry Reports - Changing Cardinal Point Abbreviations

Document Information

Reports – Cardinal Points

See Also

External Links

Geometry Reports - Changing Cardinal Point Abbreviations

Document Information

Reports – Cardinal Points

See Also

External Links

Geometry Reports - Changing Cardinal Point Abbreviations

Document Information

See Also

External Links

Geometry Reports - Changing Cardinal Point Abbreviations

Document Information

Reports –Cardinal Points

See Also

External Links