Cells come in at the wrong size in Data Acquisition SS2. Reason
set the following configuration variables in microstation
DA_DISABLE_ANNOTATIONS_BUT_APPLY_SCALE=1
DA_DISABLE_DIVIDE_BY_TWELVE=1
Use these variables to take care of scale problems
Also, the cells will get the size from the smd but drawing scale value will also affect the final size (you can play with this and select the scale desired)....you can not change the cell size once the data is processed. If you want to change it then you must change the drawing scale value and process the data again. For the text, the size will be the size selected in the drawing scale.