How to Use Create Civil Rule Feature Command

Jacquelyn Pettus — Fri, 17 Oct 2014 17:36:30 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 10/17/2014 5:36:30 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	General Geometry
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

How can I create Civil Geometry ruled elements from simple MicroStation elements?

Answer:

Use the Create Civil Rule Feature command to assign Civil Geometry rules to elements created by tools other than civil geometry commands. For example, MicroStation smart lines can become Civil Geometry ruled elements complete with manipulators and all the editing capabilities that derive therefrom.

Note: The element must be in a 2D design model to be able to convert it to a Civil Rule Feature.

Workflow:

Open the Civil Tools task pane to the General Geometry section then click the Create Civil Rule Feature icon.
Select the graphic element to which you wish to assign rules.
Reset (i.e., right-click in most cases) to close the selection set.
The selected element now has been assigned civil rules and you can select a manipulator to edit.

Tags: Bentley GEOPAK Civil Engineering Suite, Geometry, how to, SELECTsupport

How to Use Create Civil Rule Feature Command

Jacquelyn Pettus — Fri, 17 Oct 2014 17:35:36 GMT

Revision 3 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 10/17/2014 5:35:36 PM

Product(s):	InRoads, MX, GEOPAK
Version(s):	08.11.09+
Area:	General Geometry
Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question:

How can I create Civil Geometry ruled elements from simple MicroStation elements?

Answer:

Note: The element must be in a 2D design model to be able to convert it to a Civil Rule Feature.

Workflow:

Open the Civil Tools task pane to the General Geometry section then click the Create Civil Rule Feature icon.

Select the graphic element to which you wish to assign rules.

Reset (i.e., right-click in most cases) to close the selection set.

The selected element now has been assigned civil rules and you can select a manipulator to edit.

Tags: Bentley GEOPAK Civil Engineering Suite, Geometry, how to, SELECTsupport

How to Use Create Civil Rule Feature Command

Beebe Ray — Thu, 17 Jul 2014 17:55:06 GMT

Revision 2 posted to OpenRoads | OpenSite Wiki by Beebe Ray on 7/17/2014 5:55:06 PM


	Applies To

	Product(s):	Bentley GEOPAK Civil Engineering Suite
	Version(s):	08.11.09.493
	Environment:	N/A
	Area:	Geometry
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question

How can I create Civil Geometry ruled elements from simple MicroStation elements?

Answer

Note: The element must be in a 2D design model to be able to convert it to a Civil Rule Feature.

Workflow

Open the Civil Tools task pane to the General Geometry section then click the Create Civil Rule Feature icon.

Select the graphic element to which you wish to assign rules.

Reset (i.e., right-click in most cases) to close the selection set.

The selected element now has been assigned civil rules and you can select a manipulator to edit.

Tags: Bentley GEOPAK Civil Engineering Suite, Geometry, how to, SELECTsupport

How to Use Create Civil Rule Feature Command

Jacquelyn Pettus — Tue, 03 Sep 2013 16:56:15 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jacquelyn Pettus on 9/3/2013 4:56:15 PM


	Applies To

	Product(s):	Bentley GEOPAK Civil Engineering Suite
	Version(s):	08.11.09.493
	Environment:	N/A
	Area:	Geometry
	Subarea:
	Original Author:	Jacquelyn Pettus, Bentley Technical Support Group

Question

How can I create Civil Geometry ruled elements from simple MicroStation elements?

Answer

Note: The element must be in a 2D design model to be able to convert it to a Civil Rule Feature.

Workflow

Open the Civil Tools task pane to the General Geometry section then click the Create Civil Rule Feature icon.

Select the graphic element to which you wish to assign rules.

Reset (i.e., right-click in most cases) to close the selection set.

The selected element now has been assigned civil rules and you can select a manipulator to edit.

Tags: Bentley GEOPAK Civil Engineering Suite, Geometry, how to, SELECTsupport