Earthworks Strings not created correctly

Jason Walsh — Fri, 18 Oct 2013 09:05:54 GMT

Current Revision posted to OpenRoads | OpenSite Wiki by Jason Walsh on 10/18/2013 9:05:54 AM


	Applies To

	Product(s):	Bentley MXROAD
	Version(s):	08.11.07.494, 08.11.07.566, 08.11.09.493
	Environment:	N/A
	Area:	Design
	Subarea:	Earthworks
	Original Author:	Jason Walsh, Bentley Technical Support Group

Problem Description

The earthworks strings are not created correctly along part of the earthworks run. The highlighted line shows the issue.

Reason

The reason is due to the default Left and Right offset values being set in the project paramaters as 100. The earthworks being created are outside the 100 offset as shown on the screen shot.

Steps to Resolve

Option 1 - Increase the Offset values in the MX System Parameters panel

Load the MX System Parameters panel via MX>Tools>System Parameters and increase the Left and Right offset values to the required value.

Option 2 - Increase the Left and Right Offset values using Line model Option 017

The left and right offset values can also be modified using field 7 and 10 of option 017 as shown below.

017,7=-150.0,10=+150

Using the options will ensure the correct earthworks are created as below.

Earthworks Strings not reated correctly

Jason Walsh — Fri, 18 Oct 2013 09:03:51 GMT

Revision 1 posted to OpenRoads | OpenSite Wiki by Jason Walsh on 10/18/2013 9:03:51 AM


	Applies To

	Product(s):	Bentley MXROAD
	Version(s):	08.11.07.494, 08.11.07.566, 08.11.09.493
	Environment:	N/A
	Area:	Design
	Subarea:	Earthworks
	Original Author:	Jason Walsh, Bentley Technical Support Group

Problem Description

The earthworks strings are not created correctly along part of the earthworks run. The highlighted line shows the issue.

Reason

The reason is due to the default Left and Right offset values being set in the project paramaters as 100. The earthworks being created are outside the 100m offset as shown on the screen shot.

Steps to Resolve

Option 1 - Increase the Offset values in the MX System Parameters dialog

Load the MX System Parameters dialog panel via MX>Tools>System Parameters and increase the Left and Right offset values to the required value.

Option 2 - Increase the Left and Right Offset values using Line model Option 017

The left and right offset values can also be modified using field 7 and 10 of option 017 as shown below.

017,7=-150.0,10=+150

Using the options will ensure the correct earthworks are creted as below.

Earthworks Strings not created correctly

Earthworks Strings not created correctly

Problem Description

Reason

Steps to Resolve

Option 1 - Increase the Offset values in the MX System Parameters panel

Option 2 - Increase the Left and Right Offset values using Line model Option 017

See Also

Earthworks Strings not reated correctly

Problem Description

Reason

Steps to Resolve

Option 1 - Increase the Offset values in the MX System Parameters dialog

Option 2 - Increase the Left and Right Offset values using Line model Option 017

See Also