I often create As-Built survey Cross Sections using an .soe ASCII file. I then have to match these 'homemade sections" to a set of plan Cross Sections. Often the plan Cross Sections have high/low elevation limits which vary widely from section to section…

Product(s): InRoads Version(s): 08.11.07+ Area: Geometry Design This workflow will demonstrate how to create a “best fit” centerline alignment between two edge of pavement horizontal alignments. For this example, there are…

Applies To Product(s): InRoads Version(s): V08.11+ Environment: N/A Area: N/A Subarea: N/A Original Author: Bentley Technical…

Product(s): InRoads Version(s): 08.11.07+ Area: Cross Sections Original Author: Jacquelyn Pettus, Bentley Technical Support Group To display components in existing cross sections, you should use the Evaluation>Cross…

Problem: When opening a design file in Microstation alone, temporary survey graphics that have been previously displayed remain in the file. or When opening a design file with InRoads and MicroStation, graphics are visible until a MicroStation command…

Product(s): InRoads Version(s): 08.11.07+ Area: Cross Sections Original Author: Bentley Technical Support Group When running the Annotate Cross Section command, first verify the objects (components and/or crossing features…

Re: XIN Manager ? by caddcop I have found that it is possible to create reports on many of the feature settings for the XML XIN reports and with those, develop a plan of attack for edits. The results can be very similar to the CSV export. Sadly, you…

The following resources are provided as a reference by Bentley's Technical Support Group. They encompass the Bentley InRoads products. Survey Video Clips Video: InRoads 8.9 Introduction to Survey Video: InRoads 8.9 Creating Survey Filters …