Applies To Product(s): Bentley MXROAD Version(s): 08.11.09.493 or later Environment: N/A Area: Import Subarea: Lidar Original Author: Simon Pegg, Bentley Technical Support…

Product(s): MX Version(s): 08.11.09+ Area: Basic Settings Original Author: Jason Walsh, Bentley Technical Support Group Problem: The linear features for the OpenRoads design must match the receiving styleset features…

Applies To Product(s): MXROAD, InRoads, GEOPAK Version(s): 08.11.09.493 Environment: N/A Area: Vertical Geometry Subarea: Complex Vertical Profile Original Author: Jason…

Applies To Product(s): Bentley MXROAD Version(s): 08.11.09.493 Environment: N/A Area: Settings Subarea: Color Table Original…

Product(s): InRoads, MX, GEOPAK Version(s): 08.11.09+ Area: Superelevation Original Author: Jason Walsh, Bentley Technical Support Group Superelevation in OpenRoads can be calculated in two ways: Rules-based - using…

Product(s): InRoads, MX, GEOPAK Version(s): 08.11.09+ Area: Terrain Model Original Author: Kevin McDonald, Bentley Technical Support Group Problem: When I hover over a Terrain model, the tool tip says "Active Terrain…

Product(s): InRoads, MX, GEOPAK Version(s): 08.11.09+ Area: Superelevation Original Author: Nico Roman, Bentley Technical Support Group Question: How is Superelevation calculated in OpenRoads SS3? Answer: Superelevation…

Product(s): InRoads, MX, GEOPAK Version(s): 08.11.09+ Area: Superelevation Original Author: Nico Roman, Bentley Technical Support Group Question: How can I remove superelevation from a corridor without actually deleting…

Product(s): InRoads, MX, GEOPAK Version(s): 08.11.09+ Area: Superelevation Original Author: Nico Roman, Bentley Technical Support Group Settings: Config variable for sep and srl files : Civil_superelevation_rules_directory…