The Parcel Layout Settings control the two-dimensional design elements associate with each parcel.

Has Parcels: Specifies if there are parcels. Note: This would primarily be used along a roadway segment as an override setting to remove parcels in a specific location and should NOT be unchecked on the parcel area itself.

Min Parcel Surface: The minimum surface area for each parcel. Note: If the Max Parcel Depth X Min Parcel Frontage is less than the Min Parcel Surface, then the Parcel Frontage will be increased, automatically, until the Min Parcel Surface area condition is met.

 

Max Parcel Depth: The maximum depth of the parcel.

Min Parcel Frontage: The minimum width of a parcel measured at a specific distance (Frontage Offset) from the front of a parcel. Note: For Parcels along curves, the width is measured along the resulting chord.

Frontage Offset: The distance from the front of a parcel at which the Min Parcel Frontage (parcel width) is measured.