STAAD FOUNDATION ADVANCED DON'T SHOW THE RESULTS (ALL RESULTS ARE IN 0 VALUE)

Question

Hello Bentley i have a problem with the staad foundation advance, i have the version 7.2 and i design a mat foundation. the situation is i run the analysis and when is finally the analysis all the result show 0 value.

Sye · Answer

The following wiki should answer your question

Sye · Answer

Jose, Can you please click on the Disp Summary and check if you still get no results ? If you don't, please upload the .sfa file ( zip it first to reduce the file size ) and we will take a look.

Jose Gonzalez · Answer

i'am attaching the requested file FDN 11-H-1103 (22-JUN).rar

Rajat · Answer

I have forwarded your model to our development team for detailed investigation. I will get back to you as soon as I receive a reply from them. Please bear with us for now. 
Thank you for your patience.

Kris Sathia · Answer

Mr.Gonzalez, 
 Some of the key data of this model appears to have been lost when you last saved it. Here are the details: 
 
 The model contains no column positions. Column positions are the column base locations where the loads from the superstructure act on the foundation. 
 The model has load cases 100 to 227 but all of them are empty load cases, meaning, they do not contain any load items. 
 It contains a mat foundation job, but due to the absence of column positions, that job does not contain a mat boundary or mesh. 
 
 Hence, there is very little in this model that can be used. If you have an earlier version of this model which you can send us, we can look into that and see if the data can be extracted and successfully processed. 
 How did you create this model? Based on the titles of the empty load cases, it looks like it may have been done either by launching STAAD Foundation Advanced (SFA) from within STAAD.Pro, or by importing the data from either a STAAD.Pro model or from a spreadsheet. It would be easier for you to create the data afresh using one of these methods. Alternatively, if you can send us the STAAD.Pro model, we can generate the SFA file and get back to you with our findings. 
 We would also recommend that you install and run the latest version of SFA which is 08.00.01.33 which was released at the begining of January this year. A new build of SFA is due to be released shortly and it will have a number of improvements made since the January release.