Problem when importing data with Map Interoperability in Bentley Utilities Designer

Hello,

I have a problem with the importing features whit Map Interoperability.

In my case first import the Pole features and then import these Bank and they must attach to each other but in tab Relationships->Attach is empty.

My version Bentley Utilities Designer v8i SELECTseries 3.

Thanks.

Parents
  • Hi Nikolay,
    Since the Shape files do not model connectivity and attachments in the same way as Bentley Utilities Designer, importing these formats will not preserve these relationships, even if they exist in the original data. Once the features are imported into Utilities Designer, you would need to establish these relationships. How you would automate that would depend upon how the relationships were modelled in the original data.
    Hope that helps.


    This is a test

    Answer Verified By: Nikolay Tsonev 

Reply
  • Hi Nikolay,
    Since the Shape files do not model connectivity and attachments in the same way as Bentley Utilities Designer, importing these formats will not preserve these relationships, even if they exist in the original data. Once the features are imported into Utilities Designer, you would need to establish these relationships. How you would automate that would depend upon how the relationships were modelled in the original data.
    Hope that helps.


    This is a test

    Answer Verified By: Nikolay Tsonev 

Children
No Data