Wire Links

Offline Husky over 8 years ago

My wire link pairs keep reverting back to their X/1, X/2, etc. state after I close and open the drawing again. I usually always have to right click every single wire link and select "Wire Link Usage" to resolve the issue. Any idea what's causing this issue or a solution?

Many thanks,

Parents

0 Offline Matt_P Wed, Sep 23 2015 4:05 PM
Husky, this is happening in Bentley Substation, correct?
In the Wire Link Usage dialog, do the links appear with broken link icons, making you drag one link onto the other to re-link? Or do you simply need to click OK on Wire Link Usage to fix the problem?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline Husky Wed, Sep 23 2015 4:10 PM in reply to Matt_P

Matt, thanks for the prompt reply. Yes, this is Bentley Substation. I simply need to click OK on Wire Link Usage and the problem is fixed. However, they do revert back to A/1, 1/1, etc. when I close and open the drawing.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Offline Matt_P Wed, Sep 23 2015 6:28 PM in reply to Husky
I've seen incorrect linked/unlinked appearance of wire links in the past. There was a related defect since resolved. What version are you using?

One thing to try is using Replace Symbol to replace the wire link symbols with themselves, or delete and re-insert them. Is the problem isolated to certain wire links? Certain pages?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Reply

0 Offline Matt_P Wed, Sep 23 2015 6:28 PM in reply to Husky
I've seen incorrect linked/unlinked appearance of wire links in the past. There was a related defect since resolved. What version are you using?

One thing to try is using Replace Symbol to replace the wire link symbols with themselves, or delete and re-insert them. Is the problem isolated to certain wire links? Certain pages?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

Children

No Data