Change text size for Wire Tag, Guage and Colour as apart of my Wire Label

Hi Jessica,

You can makes the changes for the Wire Number Font, Size and color from Standards under Project Option's, the command can be found under Project Manager >> Project Options >> Standards >> Text Settings >> Mode >> Wire Number - Edit. 




Hope the above details help with your concern.

Regards,
Satish Saptasagar

Hi Satish,

Thanks for your reply. I was aware of this setting however I only want to change the size of the Guage and Colour, not the wire number. 

Satish, I have recently attended a Substation user group meeting. At the meeting I raised the above question. A possible solution was that I create two different Wire Label profiles; 1-Wire tag (with larger font), 2-Wire tag colour/size (with smaller font). I have done this but, do you know if I can apply two different profiles (via modify wire) to the one wire label?

At this stage I can only seem to apply one or the other :-/

Thanks

Jess

Hi Jessica,

Yes wo different Label profiles cannot be applied Wire Number as they Wire Gauge and Color are part of the Wire Number.

Regards,
Satish Saptasagar

Thank you for your response. This does make sense and I am not sure there are any further options for what we were hoping to achieve.

Thank you for your response. This does make sense and I am not sure there are any further options for what we were hoping to achieve.