After upgrading promis.e CONNECT from Update 3 to Update 4, I am not able to draw wires - see video: https://sr1pl-my.sharepoint.com/:v:/g/personal/wojciech_michalski_sr1_pl/EVI1KDpfyIBCsoye0TSpBc0BapZf2doSvsN73Jtj-Oln1A?e=zuXkRm
The situation happens with delivered examples with default workspaces/worksets and with projects restored from V8i backups.
I am in schematic mode, so issue described there: https://communities.bentley.com/products/electrical___instrumentation/w/electrical_and_instrumentation__wiki/14241/cannot-draw-wires-in-custom-modes seems not to be related with the issue.
Hi Wojtek,I went through the video that you have shared,for the issue can you go into your Project Option and check the level on which Schematic Mode wires are placed and then confirm if the Level Display for the level is on. And if it is not on kindly make it visible.Kindly let me know if the above suggestion helps with the issue you are facing.Regards,Satish Saptasagar
yes, the level display is on (global and local). On the video you can see other wires places on default wire level (ECT_CONN_GENERAL_WIRES) and they are visible. I am using only General_Wires.
I am not able to place any type of wire in any mode.
Message Center does not show any error messages while placing lines (only LOCKS=
Best regards, Wojtek
SW: Promis.e 08.11.13.96/10.04.00.22
Hi Wojtek,Can you try doing restore defaults and check if it helps with the issue you are facing. You can follow the below Wiki Link for the steps.Regards,Satish Saptasagar
that didn't help either.
Can you try to change regional settings in your system
Customize Format - Numbers - Decimal Symbol change to dot "."
Answer Verified By: WojtekM
that works! How did you come up with that?
Glad to help
I had the same problem some time ago