I have some lines on a wire harness drawing that I want to edit. When I hover over the line is says "LINE STRING" Level:ECT_CONN_GENERAL_WIRES
I would like to remove some parts of the line.
See attached.
I would like to remove the half circles from where a line crossed but the entire line seems to be one continious piece.
The really wird thing is that when I select the line, the tool bar displays the "Wire Tools" tab.
Thanks in advance.
Hi Steve,I would like to know if you want o use the standard instead of the loop over or if you do the same from Options >> Wire Settings >> Connection Preference.
HTHRegards,Satish Saptasagar
Answer Verified By: Steve Norcisa
Satish,
I did what you indicated, apparently this IS a wire, changing the setting took away the wire crossing loops.
TY!