Hello all, I have a DC schematic and a Contact Development based on a SEL-351-6 relays. The DE who created the drawings assigned the wrong family to different sections of the Contact Development and to all the placed inputs, outputs, and ports on the DC Schematic. I am trying to reassign or change the family from RL_SEL-351-6_F to RL_SEL-351-6_035163A3D5-2x1_F. When I try to reassign the family to the correct part # I get the following error message:
I have tried deleting the TBL Header and reassigning the family, does not work. I am thinking I have to delete all the IO contacts on DC schematic and start over. But I am hoping someone has a better idea?
Hi Anthony, Cam you check if the existing Family for which the Parent and child have been placed can you check if the Child Symbol are the same for the new Family Name? RegardsSatish Saptasagar
I do not understand what you mean by Child Symbol, can you expand please?
In the Family Table two different families were assigned. When I tried to correct the error, I received the error message shown above. The only way I was able to correct the issue was to delete ever child symbol that had been placed on five different schematics. I still have another table to fix, here is a screen shot of the first family assigned:
and the next family assigned,
Thank you for your help,
Hi Anthony,Can you share the screen shot of the Device Usage Chart for the above devices by following the below screens steps? RegardsSatish Saptasagar