After selecting Validate Page, a message like the following is displayed:
At least two logical lines, typically representing wires, are overlapping. Such lines are normally healed into one by the software but for some reason they were not.
Validate Page may zoom in and highlight the problem wires.
Otherwise, the Position values in the error message indicate the coordinates of the offending wires on the drawing. The example error message above indicates that a horizontal wire running from X and Y coordinates 24.875,12.000 to 25.450,12.000 overlaps another wire running from 25.000,12.000 to 26.875,12.000. Go to this area of the drawing. In the Standalone version of Promis.e and Bentley Substation, the X and Y values displayed in AccuDraw would be a guide.
Delete wires segments as necessary until there is no more overlap. Then run Update Page followed by Validate Page, fixing issues as necessary, and repeat until Validate Page returns no errors. It may be necessary to redraw wires if gaps result.
Keywords: Information, Logical Line Overlay, Handle, Position