Product(s): | Promis.e, Bentley Substation | ||
Version(s): | through 08.11.13.140 | ||
Environment: | N/A | ||
Area: | Wiring Features | ||
Subarea: | Polywire |
The PolyWire tool is for drawing wires that overlap without joining, unlike standard wires. Polywires are often used where the middle segments overlap and the ends are fanned out.
The bends of polywires are "chamfered". The chamfer cannot be removed or replaced with a fillet/radius. The size, or dimensions, of the chamfer is determined by the active grid spacing.
Symbols cannot be inserted onto a polywire. Unlike standard wires, polywires will not break at the connection points when a symbol is inserted. Place symbols first and draw the polywires to the connection points.
* is used to denote a menu selection that is not necessary in some versions or platforms.
Select Design > *Wiring > PolyWire
Select Schematic Design > *Wiring > PolyWire
Select Wiring > PolyWire
ECAD EXEC POLYWIRE
ECAD_EXEC_POLYWIRE
Original Author: | Matt_P |
keywords: scale, 45 degree, bevel