Bentley Communities
Bentley Communities
  • Site
  • User
  • Site
  • Search
  • User
  • Welcome
  • Products
  • Support
  • About
  • More
  • Cancel
OpenUtilities
  • Product Communities
  • More
OpenUtilities
OpenUtilities Wiki Resolved issues in Promis.e CONNECT Update 7, 10.07.00.17
    • Sign in
    • +OpenUtilities
    • Access Service Request Manager
    • +Bentley sisHYD Multi Utility
    • Design Features - promis.e Functionality - Promis.e Standard
    • +OpenUtilities Substation
    • Promis.e Paths
    • -Promis.e Wiki
      • -CONNECT Edition - Promis.e
        • +Administration Features - Promis.e CONNECT
        • +Automation Features - Promis.e CONNECT
        • +Component Features - Promis.e CONNECT
        • +Component Management - Promis.e CONNECT
        • +Database Platform Support - Promis.e CONNECT
        • +Drawing Management - Promis.e Connect
        • +Installation_Configuration - Promis.e CONNECT Edition
        • +Maintenance Features - Promis.e CONNECT
        • +Migration - Promis.e CONNECT
        • +OS & Hardware Support - Promis.e CONNECT
        • +Panel Layout Mode - Promis.e CONNECT
        • +Power Platform Support - Promis.e CONNECT
        • +Print and Plot features Promis.e CONNECT
        • +Project Management - Promis.e CONNECT
        • +Reports_Output Features - Promis.e CONNECT
        • -Resolved issues in Promis.e Releases
          • Resolved issues in Promis.e CONNECT Edition 10.00.00.49
          • Resolved issues in Promis.e CONNECT Edition Update 1, 10.01.00.07
          • Resolved issues in Promis.e CONNECT Edition Update 10, 10.10.00.53
          • Resolved issues in Promis.e CONNECT Edition Update 2, 10.02.00.29
          • Resolved issues in Promis.e CONNECT Edition Update 3, 10.03.00.35
          • Resolved issues in Promis.e CONNECT Edition Update 4, 10.04.00.22
          • Resolved issues in Promis.e CONNECT Edition Update 5, 10.05.00.38
          • Resolved issues in Promis.e CONNECT Edition Update 6, 10.06.00.52
          • Resolved issues in Promis.e CONNECT Edition Update 9, 10.09.00.17
          • Resolved issues in Promis.e CONNECT Update 7, 10.07.00.17
          • Resolved issues in Promis.e CONNECT Update 8, 10.08.00.32
        • +Wire Numbering - Promis.e CONNECT
        • +Wiring Feature - Promis.e CONNECT
      • About Promis.e
      • +Administration Features - Promis.e
      • +APIs_VBA - Promis.e
      • +Automation Features - Promis.e
      • +Component Features - Promis.e
      • +Component Management - Promis.e
      • +CONNECT Services - Promis.e
      • +Data Manager - Promis.e
      • +Database Platform Support - Promis.e
      • +Display - Promis.e
      • +Drawing Management - Promis.e
      • +Engineering Design Considerations - Promis.e
      • Error - Object reference...General
      • +Find_Replace - Promis.e
      • Finding the Tutorial
      • +Installation_Configuration - Promis.e
      • +Interoperability - Promis.e
      • +Licensing - Promis.e
      • +Maintenance Features - Promis.e
      • +Migration - Promis.e
      • +OS Support - Promis.e
      • +Panel Layout - Promis.e
      • +Performance - Promis.e
      • +PowerPlatform Support - Promis.e
      • +Print_Publish Features - Promis.e
      • +ProjectWise Integration - Promis.e
      • Promis.e Help file
      • +Reports_Output Features - Promis.e
      • +Template Management - Promis.e
      • +Text Tools - Promis.e
      • Training FAQs
      • +Wire Numbering - Promis.e
      • +Wiring Features - Promis.e
      • +Project Management - Promis.e
      • Promis.e Title
      • Working from home with Promise.e
    • Replace Family - Find_Replace - Promis.e
    • SQL Server Login

     
     Questions about this article, topic, or product? Click here. 

    Resolved issues in Promis.e CONNECT Update 7, 10.07.00.17

    BUG/ ENHANCEMENT         DESCRIPTION

    500362 [Promise Installation] SQL Express 2016 with the installation package 
    336592 Command Protection: user needs Create WorkSpace & Workset, Copy Project and Move to Database function to be part of Command Protection
    252394 Part number text on two lines.
    334343 [Command Protection] It should not allow to create new database in New Project,Copy Project and Restore Project through Project Database Utility when turn OFF Configure Databases
    445168 [Component] Mirrored symbol attributes text coordinates need to be corrected 
    473880 [Copy Project] Copied Projects don't have Pending changes included 
    444076 [Diagonal wire] After replace the family, the diagonal wire connection command will be invalid
    474736 [Diagonal Wire] When drawing diagonal wire type between to wire potential no EDC dialog pops up
    490881 [Insert Macro] When a symbol attribute containing "(Inch Symbol) is used to create Macro, when the macro is inserted the Value " is changed
    526223 [Installer] SQL Database connection issues occur when Microsoft SQL Server 2014 Express (BENTLEYECAD) option is deselected during installation
    517361 [Multi Language MDB] Error: Could not use "; file already in use
    421954 [Part Number] It cannot display the correct part number position with the modified part number
    420142 [Part Number] It should add the Part Number right click menu for the top part number
    420158 [Part Number] It will move the Part Number position without changing anything in the Text Setting dialog
    420573 [Part Number] Multi part numbers cannot be dealt with properly in the Sample projects and old projects
    421706 [Part Number] The rotated symbols cannot display the correct position of multi part number
    484335 [Performance] Wiring Manger taking long time to open or not responding for database that has more then 2500 projects 
    482958 [PLC Generator] Issue with PLC Diagram creation for Project located on Network location 
    443072 [PW][Import Catalog]Connect with PW, import a catalog, the imported catalog cannot list in the catalog manager dialog in time after importing.
    459428 [Regional Setting] The decimal symbol cannot keep dot after setting it.
    276493 [RestoreProject] Cannot restore project by double-click a .Prj file of promise
    524263 [Seed Files] Split seed files for each product (Substation and Promise)
    457100 [Spare Terminal]: When adding Spare terminal for part number with decimal quantity the user gets Unhandled Error message 
    532459 [Symbol Text] editing multiline symbol text changes the attribute's original insertion point
    474786 [Wire Link] When placing wire link pair on wires with different potential the user doesn't get EDC check dialog  
    322029 Command Protection: Restore Project from Tools option allows user to restore project even if there is command protection restriction for Restore 
    384236 Diagonal Wire Connection insertion point visible in export to DWG when the level is turned off
    366104 Disabling of Selecting WorkSpace and WorkSet not working with Promis.e but works in Promis.e Microstation mode
    283215 Display of page is not perviewed in Project manager if we scroll through keyboard
    444046 Promise Connect:- Wire layer is not getting display after certain limits
    473770 Symbol text appears on Parent child when value added to child symbol which contains ^ in value for symbol attribute which is hidden
    450416 TLS 1.2: User cannot create Parts Database Path for parts database on SQL Server using only TLS 1.2 settings
    283645 [Balloons] Place Balloons tool needs to work in construction drawings
    455771 Substation Workflow configuration— Support fasten the customized workflow in the Menu bar
    473609 [BOM Manager] add capability to allow user to reserve balloon numbers (add spares)
    482542 [PW Integration]Add new column "CheckedOut By" in Project Manager and synchronize the documents status in Project Manager with ProjectWise Explorer
    499473 Add the spare part out of the balloon range
    502039 [BOM Manager][Nameplate] improve message when user renumbers nameplate balloons if balloon is already associated to a different item on same BOM Document Number
    502058 [BOM Manager][Nameplate] allow user to renumber balloon if duplicate balloons are part of selection set being renumbered
    504143 [BOM Manager][Wire Link ID's] exclude all wire links from BOM Manager data grid
    505125 We should disable Insert Spare command when data is loaded using “By Work Order” option in BOM Manager dialog
    230870 Bentley Substation : Cable trench are extending beyond given point
    231503 [Insert Substation Objects]Insert Clamp with Cable method, it cannot work correctly if changing the Method in the Placement settings dialog.
    236241 Cut behaves like Extend for Repeating part types
    312217 [Martian] Some fields are translated and some are not translated in BOM Manager -> Customization 
    312257 [Martin]There is a duplicate “Material” in the drop down list, and the Show All is not translated. 
    317970 [Place 3D Macro] The icon should be updated to the new one in the Assign Device Tags dialog
    365752 [BOM Manager]Sometimes it popups error dialog when clicking the browse button of the part number.
    381904 [Balloon]The unselected balloon number is not changed if not selecting all the balloon numbers in the modify balloon dialog.
    382399 [Reference]Active a reference page and deactive it, open the original page, it always popup unexpected dialog.
    387351 [Submit to SAP] Unhandled exception occurs when submitted part does not belong to the active part database.
    392541 [BOM Manager] It reports error when assign balloon no to the part item in the BOM Manager
    393300 [BOM Manager][Report]Drag some data from Unassigned work order to an existed work order, the data cannot display in the report filter with the work order.
    432980 [Balloon]Select all the balloons->right click Move, move the balloons, it change the balloon arranges and returns to the original.
    433408 [Balloon] Delete the balloon number in the device properties dialog, the original balloon number still display in the drawing. 
    434657 [Documentation] The Mode Manager dialog in help file should be updated to new UI
    435223 [Submit BOM] Unhandled exception occurs when submitting BOM in the customized project “PIT #1 PH.Prj”.
    438307 Insert Cable / Bus :  The command reverts to default Phase level after placement of each cable segment 
    439904 [Hook Point Manager] It cannot pick a blank point coordinate from the drawing in the Hook Point Manager
    440076 [Project Manager]Error appears with modify page command in the Project Manager
    440121 Move Command: Changes the level of Cable attached to the Hook Equipment when using Hooked Objects in Move
    440886 [Balloon]Change the balloon number from “?” to an existed part number, the balloon in the drawing is not correct.
    442337 [Martian][BOM Manager] Some texts in BOM Manager are not localized.
    444125 [Project Manager][Page List] sort function not sorting records numerically or alphabetically for Ascending/Descending Sort functions
    446234 [PW_Restore] Fail to restore project with data from Conduit Builder tool to managed PW
    449234 [PW Integration] The page that opened from the PW Client side will be read only 
    449245 [PW Integration] Symbols cannot be found in the catalog when open the copied page
    449326 [PW Integration] Click Title block field reports error in the New page dialog with the restored project
    450416 TLS 1.2: User cannot create Parts Database Path for parts database on SQL Server using only TLS 1.2 settings
    452268 [BOM Manager] It should maintain the sort order after switch Group by Balloon to Device
    452865 [Insert Symbol][Recently Used] The user is not able to quickly switch between two different Recently Used symbols, Double Click selects incorrect symbol
    453726 [BOM Manager]BOM Manager->group by Device->Add Device with toggle of Create separate device per part turn off, and select a part number with quantity=2, two devices are created.
    454192 [BOM Manager] sort order not maintained when setting Group By to Device
    455195 [PW_WithCatalogsOnlyOnNetworkDrive]Modify catalog order in Modify catalog path dialog then its order cannot retain when open it next time
    455418 [Software Startup] Unhandled internal error on startup when invalid path format exists in Substation.cfg
    455432 [Software Startup] Application is frozen when invalid path exists in Substation.cfg if you clicks Cancel in Configuration Variables dialog.
    457551 [PW Integration][Project Manager] It will pop up check in dialog twice when close page in Project Manager 
    459467 [PW_NetworkCatalog] The defined network catalog is not available in Catalog Manager 
    460046 [Unhandled Error] Page Open error Type CDT.CdtCommandManager
    460059 [Project Manager]Incorrect Tool Tip Message
    460066 [Software Startup] Unhandled Error when DBSettings.xml is missing
    460072 [Software Startup] Unhandled Errors when required files are missing from Datasets\Substation\Config folder
    460131 [Software Startup] Unhandled internal error on startup when Substation.cfg is missing
    460133 [Software Startup] Configuration Variables not showing variable values which exist in Substation.cfg when one or more variables are missing
    460136 [Software Startup] Unhandled Error on startup when PartsDBMappings.xml is missing
    460138 [Insert Substation Objects][Placement Options][Cable Method] symbol does not properly follow contour of cable bus object is user applies rotation value in Angle field
    460139 [Move][Cable Method] symbol does not follow contour of cable/bus and unable to define new position properly
    460140 [Move][Cable Method] symbol's existing rotation value is not maintained if symbol was rotated using Rotate Object command
    460143 [Project Manager]Error occurs when project names with a suffix of space
    462892 [Stretch][Variable Object][Cable/Bus] Quantity not updated after user uses Stretch command
    472011 [Move][Cable Method] symbol's existing mirrored orientation is not maintained is symbol was mirrored using Mirror Object Command
    473174 Insert Cable: 3D Cables inserted in 3D layout mode with the Millimeters as units the cable is not inserted correctly 
    473379 [BOM Manager][Edit][Starting Balloon No] incorrect handling of balloon number assignment for devices without partnumbers
    473623 [BOM Manager] change device's partnumber for device with placed symbol removes part number and balloon values from device associated with placed symbol
    473627 [BOM Manager][Validation][Duplicate balloon number] not always showing all duplicates
    473824 [Load Work Order]It should display default “Activate Work Orders” in the Load Work Order dialog.
    474386 [Insert 3D Objects] Set variables in the Placement Options will not work properly 
    475723 [TLS1.2][Backup Project] An error occurs when backup project using only SQL Server TLS 1.2 settings
    476000 [Delete][Field]Installation and Location values not updating after user selects Yes to rename Installation/Location fields
    476003 [Delete][Field] Installation, Location, and Device Tag values disappear from Device Properties after user selects No to not duplicate device ID's
    476703 [Device Properties][Select Device ID] unexpected Device usage chart appears after selecting device ID on drawing
    477174 [PW integration][Project Manager]Check in dialog pops up twice 
    478191 [BOM Manager][Submit] Submit Flag not set when BOM is submitted to SAP
    478396 [Chinese Language Package on EN OS][Auto Backup]The projects which name or path contain Chinese characters can’t be auto backup.
    478432 [PW_Configuration Variables] Click PW browse to select the displayed cfg file for ELEC_PARTS_DB_MAPPING_PATH, an error appears
    479016 [BOM Manager][Edit][Starting Balloon No] unable to renumber Nameplate balloon number if Starting Balloon number less than or equal to highest balloon in project
    479963 [BOM Manager][Submit] field or fields not truncated properly
    482210 [Move To Database] incorrect message displayed when one or more pages of project are open
    482751 Update TP feature list in installer as we moved to PP U15.
    483197 [Catalog Manager] The Thumbnail is grayed out with ProjectWise Datasource
    483586 [Reports][BOM_Substation_QTY] missing report records when filtering by WorkOrder, BOM Document, Revision Number
    483751 [Alert Message] An unexpected Alert dialog occurs with multi functions in the new Substation build 10.09.01.07
    488605 [Performance] There is a memory leak issue in Insert Symbol dialog
    488721 [Display Style] Setting the Display style will crash 
    488805 [Update Cable object] The cable level will be changed to PHASE or CABLE_NAKED after update cable object
    496389 [Cable Object] It will change the decimals notation to scientific notation when update cable object
    496648 [Draw Cable] It cannot draw cable properly except the Spline sag algorithm with the MM seed file  
    499586 [BOM Manager] add a part from database in BOM Manager dialog, and then insert the object in the drawing by insert symbol by device id, the symbol lost the work order attributes.
    500395 [Reporting] An error occurs when running Text on drawing text on drawing and there is workorder filter in the report “BOM_Substation_Qty”.
    502068 [iModelHub]Cannot publish a project to iModelHub server because of PP U15.
    502338 [Reporting] An error occurs when running the report “Job Costing List – A4” or “Job Costing List – Letter” in the project “CATLETT SUBSTATION TRAINING.Prj”
    506556 [Copy Project][Work Order Manager] Work Order Manager will list duplicate work order in the copied project
    511060 [BOM Manager][Add Spare] Insert Balloon should never cause duplicate balloon numbers on same BOM Document(Insert Spare – Revision Level  and Insert Spare – Document Level).
    511907 [BOM Manager] Load lowercase and uppercase  BOM Document will report error in BOM Manager
    515669 [Replace/ Update Symbol] When a child symbol is modified and then replaced or updated in Project the connection points for child symbols are changed
    • promise CONNECT
    • en
    • Resolved Issues
    • Release Information
    • Share
    • History
    • More
    • Cancel
    • Satish Saptasagar Created by Bentley Colleague Satish Saptasagar
    • When: Mon, Feb 8 2021 1:19 PM
    • Revisions: 1
    • Comments: 0
    Recommended
    Related
    Communities
    • Home
    • Getting Started
    • Community Central
    • Products
    • Support
    • Secure File Upload
    • Feedback
    Support and Services
    • Home
    • Product Support
    • Downloads
    • Subscription Services Portal
    Training and Learning
    • Home
    • About Bentley Institute
    • My Learning History
    • Reference Books
    Social Media
    •    LinkedIn
    •    Facebook
    •    Twitter
    •    YouTube
    •    RSS Feed
    •    Email

    © 2021 Bentley Systems, Incorporated  |  Contact Us  |  Privacy |  Terms of Use  |  Cookies