How can users filter cable reports in Promis.e CONNECT?
The user can filter the built-in cable list reports such as Cable List or Field Wire List. There are various variables in the filtering that are repeated with Prefixes. The Prefixes are:
Therefore, the variable named “T1_Installation” is for the Installation name of the Target 1 device connected to the one end of the cable, where “Cable_Installation” is the variable for the Cable symbol’s Installation name.
At the top of the list are also some variables that don’t have a prefix, such as Installation, Location, and Device Tag. This is a special set of variable names that have OR-type logic built into them. The Filter dialog does not allow for user-defined OR type logic so these variable names will apply to both target devices on the ends of the cables.
Select Output >> Run Reports >> Field Wire List and select any Report Template.
Select the Filters button and then from the Field drop-down list select "Cable_Device Tag" select the Relationship to "=" and specify the Cable Device Tag as Value for example "W1" as seen in below image and select OK.
Now Run the Report to file or select to Preview the results.
Select the Filters button and then from the Field drop-down list select "Installation" select the Relationship to "=" and specify the Cable Device Tag as Value for example "P1" as seen in the below image and select OK.
The resulting report should provide a list of all information for the conductors whose Target 1 or Target 2 device Installation name is "A". Conductors whose Target 1 and Target 2 device Installation names do not match this filter will not be listed. Therefore unused conductors will also be excluded from the report.
Note: To use a wildcard (*) in the Value column, select "Like" in the Relationship column.